Quaser HX504
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
pallet size
max work swing diameter
max work piece height
How much does the Quaser HX504 cost?
Price estimate
We do not have a price for the Quaser HX504 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
With a 500 mm (19.7") square pallet and 762 mm (30") of X travel, the Quaser HX504 is the mid-size 40 taper horizontal in the HX series. Quaser's pitch for the series is short non-cutting time and a stable structure, and it calls these machines compact and high speed.
Z is the long axis: 810 mm (31.9"), against 640 mm (25.2") of Y. That depth is useful in two ways. It lets a long tool, and the magazine takes them up to 450 mm (17.7"), back away far enough to clear a wide tombstone during indexing. And it gives reach into deep housings from the pallet center. The work envelope is a Ø762 mm (Ø30") swing and 900 mm (35.4") of height, with 500 kg (1,102 lbs) on the pallet.
Spindle speed is listed as 8K ~ 15K. That is a lower band than the smaller HX404, which is listed at 12K ~ 20K, and it suggests a machine set up for iron and steel castings as much as for aluminium. The 60-tool standard magazine accepts tools 76.2 mm (3") in diameter, or 150 mm (5.9") with neighboring pots empty.
Two pallets and an arm type changer are standard, and the B axis indexes to a listed minimum of 1/0.001 degrees. Quaser says factory automation equipment is available for higher productivity.
Full Specifications
| Parameter | Value |
|---|---|
| Pallet Size | □500 mm (19.7") |
| Max Work Swing Diameter | Ø762 mm (Ø30") |
| Max Work Piece Height | 900 mm (35.4") |
| X Axis Travel | 762 mm (30") |
| Y Axis Travel | 640 mm (25.2") |
| Z Axis Travel | 810 mm (31.9") |
| B Axis Min Indexing Degree | 1/0.001 |
| Max Table Load | 500 kg (1,102 lbs) |
| Number of Pallets | 2 |
| Pallet Changer Type | Arm type |
| Spindle Taper | 40 taper |
| Max Spindle Speed | 8K ~ 15K |
| Tool Capacity | 60 (std.) |
| Max Tool Diameter (full magazine) | 76.2 mm (3") |
| Max Tool Diameter Neighbor Pots Empty | 150 mm (5.9") |
| Max Tool Length | 450 mm (17.7") |
Specifications sourced from quaser.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 810 mm (31.9") of Z travel on a 500 mm (19.7") pallet machine
- Tools up to 450 mm (17.7") long and 150 mm (5.9") in diameter with neighboring pots empty
- 60 tool positions as standard
- Ø762 mm (Ø30") work swing with 900 mm (35.4") of work piece height
- Twin pallets with arm type exchange
Limitations
- Spindle speed band of 8K ~ 15K is lower than the 12K ~ 20K of the HX404
- Y travel is 640 mm (25.2"), no more than the HX404, although the height limit is 900 mm (35.4")
- 500 kg (1,102 lbs) pallet load; the 50 taper HX635 carries 900 kg (1,984 lbs)
- Spindle power and torque are missing from the published table
Best For
Frequently Asked Questions
01
X travel is 762 mm (30"), Y travel is 640 mm (25.2") and Z travel is 810 mm (31.9"). The pallet is 500 mm (19.7") square and the B axis has a listed minimum indexing of 1/0.001 degrees.
02
The maximum work swing diameter is Ø762 mm (Ø30") and the maximum work piece height is 900 mm (35.4"). The pallet load capacity is 500 kg (1,102 lbs), fixture included.
03
A 40 taper spindle with a maximum speed listed as 8K ~ 15K. That is a range of options. Quaser does not publish power or torque on the product page, so ask for the chart of the spindle in the quotation.
04
The standard magazine has 60 positions. Maximum tool diameter is 76.2 mm (3") with adjacent pots filled and 150 mm (5.9") with neighboring pots empty; maximum tool length is 450 mm (17.7").
More from Quaser
Other Horizontal Machining Centers (HMC)
Haas EC-1600ZT
SW BA 711
You Ji HMC1200
Makino MCD2018
Feeler FMH-630
