Nicolas Correa FENIX T
Key Specifications
Max Spindle
Spindle Taper
Spindle Power
turning table diameter
turning table load
turning table speed
How much does the Nicolas Correa FENIX T cost?
Price estimate
We do not have a price for the Nicolas Correa FENIX T that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Put a turning table in the working area of the FENIX and the result is the Nicolas Correa FENIX T. The maker calls it a multitasking machine that brings the capabilities of milling and turning machines into one integrated unit. Its turning table measures 1,600 - 3,000 mm across, takes 6 - 60 t and runs at 100 - 250 rpm.
Around that table the column travels 4,000 - 25,000 mm in X. Cross travel is 1,250 - 1,500 mm, and there are five vertical travels to choose from: 1,500 / 2,000 / 2,300 / 2,500 / 3,000 mm. The low Z options set it apart from the AXIA T, which has the same turning table figures but starts its vertical travel at 2,500 mm. Discs, rings and short housings get the same table here without the taller column.
Two things changed against the FENIX itself. Y and Z feed at 30 m/min while X stays at 25 m/min; the FENIX lists 25 m/min on every axis. And the spindle rows now line up. Three speeds, 6,000 - 6,000 - 10,000 rpm, stand against three power figures, 33 - 43 - 42 kW, and three torque figures, 990 - 1291 - 620 Nm. Read in order, that puts 42 kW and 620 Nm with the 10,000 rpm spindle and leaves the heavy torque to the two 6,000 rpm versions, though the page does not say so outright.
Capto C8 joins ISO-50 Big Plus and HSK-100 in the taper row. An automatic universal head, a Heidenhain or Siemens (Operate HMI) control, linear scales in all axes and guarding come as standard equipment.
Full Specifications
| Parameter | Value |
|---|---|
| Turning Table Diameter | 1,600 - 3,000 mm |
| Turning Table Load | 6 - 60 t |
| Turning Table Speed | 100 - 250 rpm |
| X Axis Travel | 4,000 - 25,000 mm |
| Y Axis Travel | 1,250 - 1,500 mm |
| Z Axis Travel | 1,500 / 2,000 / 2,300 / 2,500 / 3,000 mm |
| Max Feed X | 25 m/min |
| Max Feed Y | 30 m/min |
| Max Feed Z | 30 m/min |
| Spindle Taper | ISO-50 Big Plus / HSK-100 / Capto C8 |
| Max Spindle Speed | 6,000 - 6,000 - 10,000 rpm |
| Spindle Motor Power | 33 - 43 - 42 kW |
| Spindle Torque | 990 - 1291 - 620 Nm |
Specifications sourced from nicolascorrea.com — verified 2026-10-05
Strengths & Limitations
Strengths
- Turning table of 1,600 - 3,000 mm for loads of 6 - 60 t at 100 - 250 rpm
- Five vertical travels from 1,500 mm to 3,000 mm, so column height can follow the part
- Y and Z feed at 30 m/min, up from 25 m/min on the FENIX
- Speed, power and torque rows each carry three entries: 6,000 - 6,000 - 10,000 rpm, 33 - 43 - 42 kW, 990 - 1291 - 620 Nm
- Standard equipment includes the automatic universal head and a Heidenhain or Siemens (Operate HMI) control
Limitations
- Cross travel is 1,250 - 1,500 mm, shorter than the 1,500 / 1,750 mm of the AXIA T
- X feed remains 25 m/min while Y and Z move at 30 m/min
- Which table diameter carries which load at which speed is not broken down
- The page lists no optional equipment, so magazine size and probing are not documented
Best For
Frequently Asked Questions
01
The FENIX T has a turning table: 1,600 - 3,000 mm diameter, 6 - 60 t, 100 - 250 rpm. Its X travel is 4,000 - 25,000 mm, where the FENIX lists 4,500 - 25,500 mm. Y and Z feed rise to 30 m/min from the 25 m/min of the FENIX, and Capto C8 is added to the taper options. Y travel and the five Z travels are unchanged.
02
Both list the same turning table range. The difference is the column. The FENIX T offers Z of 1,500 / 2,000 / 2,300 / 2,500 / 3,000 mm and Y of 1,250 - 1,500 mm. The AXIA T starts at 2,500 mm of Z, goes to 4,000 mm and has Y of 1,500 / 1,750 mm. Low, wide parts point to the FENIX T; tall ones to the AXIA T.
03
Three versions are printed in matching order: speeds of 6,000 - 6,000 - 10,000 rpm, power of 33 - 43 - 42 kW and torque of 990 - 1291 - 620 Nm. The taper is ISO-50 Big Plus, HSK-100 or Capto C8. Have the maker confirm the pairing in writing, since the table gives the rows without naming each spindle.
04
Yes. Standard equipment lists a numerical control from Heidenhain or Siemens (Operate HMI), together with a portable handwheel, an air-conditioned electrical cabinet, linear guides in the X, Y and Z axes, a hydraulic and cooling group, tele-service and VIXION 4.0.
More from Nicolas Correa
Other Mill-Turn / Multi-Tasking Machines
Emco Hyperturn 100 Powermill
DMG Mori NT 6600 DCG
Goodway GMT-2000S
Mazak INTEGREX i-350ST NEO
Quicktech S42 ATM
