Nicolas Correa FOX T
Key Specifications
Max Spindle
Spindle Taper
Spindle Power
table diameter
max table load
table speed
How much does the Nicolas Correa FOX T cost?
Price estimate
We do not have a price for the Nicolas Correa FOX T that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Nicolas Correa FOX T is a bridge type machine whose table is round and rotates. Where the FOX carries a table of 3,500 - 8,500 x 2,000 - 2,500 mm, the FOX T lists a table of 2,000 / 2,500 mm diameter with a table speed of 250 / 150 rpm. In effect it is a vertical turning station under a milling bridge.
The envelope follows from the round table. X travel is a single figure, 3,000 mm (118.1 in), while the FOX runs from 3,000 - 8,000 mm: the table only has to bring the part under the spindle and across its own diameter. The bridge itself is unchanged. Y travel is 3,000 / 3,750 / 4,250 mm with 2,500 / 3,250 / 3,750 mm between the columns, and Z is 1,000 / 1,500 / 1,750 mm. Five clearances from the universal head nose to the table top are offered, from 1,140 mm to 2,140 mm.
Load is given as 5,000 - 10,000 / 20,000 kg. The slash lines up with the two diameters and the two speeds, which suggests the larger table takes 20,000 kg at 150 rpm and the smaller one runs to 250 rpm. The page doesn't spell that out, so have it confirmed.
Spindle rows repeat those of the FOX: 6,000 / 10,000 rpm, 37 / 52 / 42 kW and 1,298 / 1,375 / 620 Nm. Capto C8 is added to the ISO-50 Big Plus and HSK-100 tapers, and all three axes feed at 30 m/min. No equipment lists appear for this variant. Head, tool magazine and control are points to settle with the maker.
Full Specifications
| Parameter | Value |
|---|---|
| Table Diameter | 2,000 / 2,500 mm |
| Max Table Load | 5,000 - 10,000 / 20,000 kg |
| Table Speed | 250 / 150 rpm |
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 3,000 / 3,750 / 4,250 mm |
| Z Axis Travel | 1,000 / 1,500 / 1,750 mm |
| Distance Between Columns | 2,500 / 3,250 / 3,750 mm |
| Distance Head Nose Uad to Table Top | 1,140 / 1,390 / 1,640 / 1,890 / 2,140 mm |
| Max Feed X | 30 m/min |
| Max Feed Y | 30 m/min |
| Max Feed Z | 30 m/min |
| Spindle Taper | ISO-50 Big Plus / HSK-100 / Capto C8 |
| Max Spindle Speed | 6,000 / 10,000 rpm |
| Spindle Motor Power | 37 / 52 / 42 kW |
| Spindle Torque | 1,298 / 1,375 / 620 Nm |
Specifications sourced from nicolascorrea.com — verified 2026-10-05
Strengths & Limitations
Strengths
- Round table of 2,000 / 2,500 mm diameter with a table speed of 250 / 150 rpm
- Table load of 5,000 - 10,000 / 20,000 kg
- Up to 2,140 mm between the universal head nose and the table top, in five steps from 1,140 mm
- Same spindle rows as the FOX: 37 / 52 / 42 kW and 1,298 / 1,375 / 620 Nm
- Feed of 30 m/min on X, Y and Z
Limitations
- X travel is 3,000 mm (118.1 in) only; the FOX goes to 8,000 mm
- The largest table is 2,500 mm in diameter, smaller than the 3,000 mm tables of the AXIA T
- Table speed drops to 150 rpm on one of the two versions
- No standard or optional equipment list is shown for this variant
Best For
Frequently Asked Questions
01
The table. The FOX has a table of 3,500 - 8,500 x 2,000 - 2,500 mm and X travel of 3,000 - 8,000 mm. The FOX T has a round table of 2,000 / 2,500 mm diameter that turns at 250 / 150 rpm, with X travel fixed at 3,000 mm (118.1 in). Y, Z, the distance between columns and the spindle rows are the same on both.
02
The row reads 5,000 - 10,000 / 20,000 kg. Two diameters, 2,000 / 2,500 mm, and two speeds, 250 / 150 rpm, are printed the same way, so the 20,000 kg figure most likely belongs to the larger, slower table. Treat that as a reading of the table and ask for the rating of the exact version.
03
The distance between the head nose (UAD) and the table top is listed in five values: 1,140 / 1,390 / 1,640 / 1,890 / 2,140 mm. Vertical travel is 1,000 / 1,500 / 1,750 mm. Fixture height and tool length come off the clearance, and the columns stand 2,500 / 3,250 / 3,750 mm apart.
04
ISO-50 Big Plus, HSK-100 or Capto C8. Programmable speed is 6,000 / 10,000 rpm, with maximum power of 37 / 52 / 42 kW and maximum torque of 1,298 / 1,375 / 620 Nm. Capto C8 is the entry the FOX page does not have.
More from Nicolas Correa
Other Mill-Turn / Multi-Tasking Machines
Emco Hyperturn 45
DMG Mori NTX 2500
Goodway GMT-4000L3
Mazak INTEGREX i-450H ST
Mazak INTEGREX e-420H-S
