MultiCam 6000 Series CNC Router
This model was not found in MultiCam's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
Spindle Power
Accuracy
work area options
spindle speed
positioning speed
toolchanger
How much does the MultiCam 6000 Series CNC Router cost?
Estimated price range
Our best estimate for a cnc router in this class — not a quote from MultiCam. Configuration moves it a long way.
Overview
The MultiCam 6000 Series CNC Router is a gantry router listed with a 9.2 HP (6.9 kW) standard spindle, a 14-position automatic toolchanger and a base working size of 5x10 ft (1524x3048mm). MultiCam does not show the 6000 Series in its current lineup, so this page mainly serves someone assessing a used machine, and the listed figures have not been confirmed against a MultiCam document.
The spindle is the clearest part of the table. Power is 9.2 HP (6.9 kW) as standard and speed is listed up to 24,000 RPM, with one row giving the range as 18,000 – 24,000 RPM. Read the spindle nameplate instead of relying on the top figure. A 9.2 HP (6.9 kW) spindle is a moderate rating for a bed this size, so cutter diameter and depth of cut have to be chosen to match.
Tool changes are automatic across 14 positions, and work is held by a vacuum zone system. Z travel is listed at 10 in (254 mm), and a separate Z clearance row gives 200 mm, so the usable height under the gantry is less than the stroke. Positioning accuracy is listed at ±0.1 mm.
Size is where a buyer needs a tape measure. The rows agree on the 5x10 ft (1524x3048mm) format, also written as 120 × 60 in (3,048 × 1,524 mm), but they differ on which longer and wider beds were offered. They also disagree on the rapid rate and on the name of the control, so confirm both on the machine itself. Weight is listed at approx. 5,000 – 7,000 kg depending on configuration, which calls for a rigging plan.
Full Specifications
| Parameter | Value |
|---|---|
| Work Area Options | 5x10 ft (1524x3048mm) to 5x24 ft (1524x7315mm) |
| Spindle Motor Power | 9.2 HP (6.9 kW) standard |
| Spindle Speed | Up to 24,000 RPM |
| Positioning Speed | Up to 40 m/min (1,575 in/min) |
| Positioning Accuracy | ±0.1 mm |
| Toolchanger | 14-position automatic |
| CNC Control | MultiCam EZ Control |
| Hold Down | Vacuum zone system |
| Z Clearance | 200 mm |
| Table | Aluminum T-slot + phenolic spoilboard |
| Working Area X Y Z | 120 × 60 × 10 in (3,048 × 1,524 × 254 mm) / 144 × 72 × 10 in (3,658 × 1,829 × 254 mm) |
| Max Spindle Speed | 18,000 – 24,000 RPM |
| Feed Rate | Up to 1,200 in/min (30.5 m/min) rapid |
| Control System | MultiCam eQUICK (Windows-based, G-code compatible) |
| Table Type | Vacuum hold-down; T-slot optional |
| Machine Weight | Approx. 5,000 – 7,000 kg depending on configuration |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- 14-position automatic toolchanger
- 9.2 HP (6.9 kW) standard spindle listed up to 24,000 RPM
- Work is held by a vacuum zone system
- Positioning accuracy listed at ±0.1 mm
- 10 in (254 mm) of Z travel
Limitations
- Not in MultiCam's current lineup, and the listed figures are unconfirmed
- Listed rows disagree on the rapid rate, the control name and the larger bed sizes, so each machine must be checked
- Z clearance is listed at 200 mm, which caps material and fixture height
- Listed weight of approx. 5,000 – 7,000 kg makes relocation a rigging job
Best For
Frequently Asked Questions
01
No. MultiCam does not show the 6000 Series among its current routers, so it appears to be an older model. The listed figures are unconfirmed, which makes an inspection of the actual machine more important than the table.
02
The standard spindle is listed at 9.2 HP (6.9 kW). Speed is listed up to 24,000 RPM, and one row gives a range of 18,000 – 24,000 RPM, so check the nameplate of the spindle fitted to the machine you are looking at.
03
The format the rows agree on is 5x10 ft (1524x3048mm), with 10 in (254 mm) of Z travel and a listed Z clearance of 200 mm. Longer and wider beds are listed, but the rows do not agree on their sizes, so measure the bed.
04
The toolchanger is listed as 14-position automatic, and hold-down is by a vacuum zone system. The table does not state the vacuum pump size or the tool holder type, so check both on the machine.
Videos
MultiCam Middle East
MulticamGermany
Community Discussions
Troubleshooting and problem-solving
Links to community discussions. Summaries are editorial — visit the original thread for full context.
