Masterwood Project 300 CNC Machining Center
This model was not found in Masterwood's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
Spindle Power
Accuracy
working area x y z
max spindle speed
feed rate
machine weight
How much does the Masterwood Project 300 CNC Machining Center cost?
Estimated price range
Our best estimate for a cnc router in this class — not a quote from Masterwood. Configuration moves it a long way.
Overview
The Masterwood Project 300 is a CNC router with a listed working area of 3,200 × 1,600 × 200 mm (approx. 10.5×5.2 ft) and a 15 kW (20 HP) electrospindle that runs to 18,000 RPM. Masterwood's current lineup does not include this model, and the listed figures have not been checked against a maker page, so use them as a guide when looking at an existing machine and confirm them against its own plate.
The working area is long and wide but shallow: 200 mm of Z leaves limited room once tool length and a fixture or spoilboard are subtracted. Feed is listed at up to 20,000 mm/min in rapid and up to 12,000 mm/min in cut, with positioning accuracy of ±0.05 mm (±0.002 in). At approx. 6,000 kg (13,200 lbs) the machine needs a rigging plan and a floor checked for the load. The listed figures include no tool changer, control or table type, so ask the seller about each.
Full Specifications
| Parameter | Value |
|---|---|
| Working Area X Y Z | 3,200 × 1,600 × 200 mm (approx. 10.5×5.2 ft) |
| Spindle Motor Power | 15 kW (20 HP) electrospindle |
| Max Spindle Speed | 18,000 RPM |
| Feed Rate | Up to 20,000 mm/min rapid; up to 12,000 mm/min in cut |
| Positioning Accuracy | ±0.05 mm (±0.002 in) |
| Machine Weight | Approx. 6,000 kg (13,200 lbs) |
Specifications sourced from machinio.com — verified 2026-03-28
Strengths & Limitations
Strengths
- Working area of 3,200 × 1,600 × 200 mm (approx. 10.5×5.2 ft)
- 15 kW (20 HP) electrospindle with a maximum speed of 18,000 RPM
- Feed listed at up to 20,000 mm/min in rapid and up to 12,000 mm/min in cut
Limitations
- Not in Masterwood's current lineup, and the listed figures have not been checked against a maker page
- Only 200 mm of Z in the working area, which limits thick workpieces and long tools
- No tool changer, control or table type appears in the listed figures
Best For
Frequently Asked Questions
01
Masterwood's current lineup does not include the Project 300, so it may be an older model. The figures here are the listed figures and have not been confirmed against a maker page; check them on the machine itself before relying on any of them.
02
The listed working area is 3,200 × 1,600 × 200 mm (approx. 10.5×5.2 ft). The 200 mm figure is the Z dimension, so tool length and any fixture height come out of it before the workpiece thickness.
03
The listed figures give a 15 kW (20 HP) electrospindle with a maximum speed of 18,000 RPM. No tool interface or tool changer is listed, so confirm both on the machine being considered before planning tooling.
Videos
Cobus Viljoen
GLOMACH
