Jingdiao Vertical Machining Centers (VMC)

Jingdiao JDLVM400T_A10S

Q: How much does the Jingdiao JDLVM400T_A10S cost?

The price estimate for the Jingdiao JDLVM400T_A10S is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/jingdiao-jdlvm400t-a10s#price; the request is passed to Jingdiao or an authorised dealer.

Specs verified 2026-10-04 · en.jingdiao.com Updated 2026-10-04

Key Specifications

Max Spindle

28,000 rpm (standard spindle); 32,000 rpm (optional spindle)

Spindle Taper

ISO25 (standard); HSK32 (optional)

Table Size

480 × 450 mm (18.9 × 17.7 in)

Accuracy

0.008 / 0.008 / 0.006 mm (X/Y/Z)

Repeatability

0.006 / 0.006 / 0.005 mm (X/Y/Z)

x axis travel

400 mm (15.7 in)

How much does the Jingdiao JDLVM400T_A10S cost?

Price estimate

Uncertain

We do not have a price for the Jingdiao JDLVM400T_A10S that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

The Jingdiao JDLVM400T_A10S is a compact 3-axis machining center for the small hardware of consumer electronics. Travel is 400 mm (15.7 in) in X and in Y and 260 mm (10.2 in) in Z, over a 480 × 450 mm (18.9 × 17.7 in) table. It shares that table size with the JDLVG400E_A8 glass grinder, which has 160 mm (6.3 in) of Z, but carries a spindle built for tapping.

The standard spindle is a 28,000 rpm ISO25 unit, which the maker describes as having a fast tapping function. That matters on this kind of part, where a cycle is mostly small drilled and tapped holes plus a finishing pass. A 32,000 rpm spindle is the option when surface finish with very small cutters counts for more.

Four magazine arrangements are listed, which is unusual on a machine this small. The base is a servo magazine with 12 tools. The optional spindle comes with 16 tools. With the standard spindle there is also a double-deck servo magazine with 24 tools, or a chain magazine with a manipulator holding 32 tools. Parts with many features can therefore stay in one setup.

The frame is a symmetrical fixed-beam portal, and Jingdiao points to a more rigid head, longer head travel and a larger feed space. The front door is automatic and the coolant tank sits at the side. Accuracy on the data sheet is 0.008 / 0.008 / 0.006 mm (X/Y/Z) for positioning and 0.006 / 0.006 / 0.005 mm for repeatability, with rapids of 15 m/min (591 ipm). The machine weighs 2,600 kg (5,732 lb) and the table carries 100 kg (220 lb).

Full Specifications

Parameter	Value
X Axis Travel	400 mm (15.7 in)
Y Axis Travel	400 mm (15.7 in)
Z Axis Travel	260 mm (10.2 in)
Table Size	480 × 450 mm (18.9 × 17.7 in)
Max Table Load	100 kg (220 lb)
Spindle Type	JD105S-28-ISO25 (standard) or JD105-32-HSK32 (optional)
Max Spindle Speed	28,000 rpm (standard spindle); 32,000 rpm (optional spindle)
Spindle Taper	ISO25 (standard); HSK32 (optional)
Tool Magazine	Servo Tool Magazine (12 Tools) standard; Servo (16 Tools) with the optional spindle; Double-deck Servo (24 Tools) or Chain Type with Manipulator (32 Tools) with the standard spindle
Positioning Accuracy	0.008 / 0.008 / 0.006 mm (X/Y/Z)
Repeatability	0.006 / 0.006 / 0.005 mm (X/Y/Z)
Rapid Traverse Xyz	15 m/min (591 ipm)
Cutting Feed Rate	10 m/min (394 ipm)
Drive System	AC Servo
CNC Control	JD50 Control System
Power Requirement	3-phase 380V / 50Hz
Air Pressure	≥0.52 MPa
Machine Weight	2,600 kg (5,732 lb)

Specifications sourced from en.jingdiao.com — verified 2026-10-04

Strengths & Limitations

Strengths

28,000 rpm ISO25 spindle with a fast tapping function as standard
Magazine options up to a chain type with manipulator holding 32 tools
Z travel of 260 mm (10.2 in) on a 400 mm (15.7 in) class machine
Compact machine weighing 2,600 kg (5,732 lb)
Automatic front door and side-mounted coolant tank

Limitations

The base magazine holds 12 tools
Small tapers only: ISO25 as standard
Positioning accuracy of 0.008 / 0.008 / 0.006 mm (X/Y/Z); the JDHGT400T on similar travels lists 0.002 / 0.002 / 0.002 mm (X/Y/Z)
Table load is 100 kg (220 lb)

Best For

Small hardware for consumer electronics Parts dominated by small drilled and tapped holes Finishing passes on small hardware where surface quality matters Multi-feature parts that need 24 or 32 tools in one setup

Frequently Asked Questions

01 What is the JDLVM400T_A10S designed for?

The data sheet says it is mainly used for small hardware machining of consumer electronic products, and the product page heads it as 3-axis machining for 3C products and small hardware. Jingdiao stresses its finishing capability and the surface quality of finished parts.

02 What are the travels, table size and weight?

X and Y travel are 400 mm (15.7 in) each and Z travel is 260 mm (10.2 in). The worktable is 480 × 450 mm (18.9 × 17.7 in) with a 100 kg (220 lb) maximum load. The machine weighs 2,600 kg (5,732 lb).

03 Which spindles are available?

The standard spindle is the JD105S-28-ISO25, running to 28,000 rpm with an ISO25 holder. The option is the JD105-32-HSK32 at 32,000 rpm, whose holder the page prints as HSK32. Jingdiao describes its self-produced electric spindle on this machine as having a fast tapping function.

04 How many tools can it hold?

It depends on the configuration. The standard servo magazine holds 12 tools, and the optional 32,000 rpm spindle is listed with a 16-tool servo magazine. With the standard spindle a double-deck servo magazine with 24 tools or a chain type magazine with manipulator holding 32 tools can be chosen.

05 How does it compare with the JDLVM800T_A13S?

The JDLVM800T_A13S is the long-table machine: 800 mm (31.5 in) of X travel, a 24,000 rpm BT30 spindle and a 32-tool chain magazine as its listed configuration, at 4,800 kg (10,582 lb). The JDLVM400T_A10S is the compact one, with 400 mm (15.7 in) of X and smaller ISO25 tooling.