Huron DX 200-12 B
Key Specifications
Max Turn Length
Accuracy
Repeatability
swing over bed
standard turning diameter
max turning diameter
How much does the Huron DX 200-12 B cost?
Price estimate
We do not have a price for the Huron DX 200-12 B that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Huron DX 200-12 B is the top specification in the DX 200 series: the longest bed with the largest spindle. It turns parts up to 1,200 mm (47.2 in) long and 365 mm in diameter, and its A2-8 spindle passes 75 mm bar through a 90 mm bore.
That makes it the natural choice for long hollow work. Tubes, hollow piston rods and large-diameter bar can run through the headstock, with the far end carried by the tailstock at up to 500 kgf. The speed range is 50-3,500 rpm, appropriate for the diameters involved.
Huron lists 14.4/11 kW for the Siemens spindle motor and 11/9 kW for the Fanuc one. On a machine that may be roughing 75 mm bar over more than a metre, power is worth weighing carefully against the work planned.
Machine weight is 4,900 kg (10,803 lb). Dimensions are 3,625 x 1,800 mm with a height of 1,715 mm. The stated accuracy is 0.01 mm positioning and 0.005 mm repeatability. Tooling is limited to the 8-station turret with 25 x 25 mm shanks and 40 mm boring bars. For deep internal work in a 90 mm bore, the 40 mm bar size and its reach will be the limit before the spindle is.
Full Specifications
| Parameter | Value |
|---|---|
| Swing Over Bed | 500 mm (19.7 in) |
| Standard Turning Diameter | 250 mm (9.8 in) |
| Max Turning Diameter | 365 mm (14.4 in) |
| Max Turning Length | 1,200 mm (47.2 in) |
| X Axis Travel | 200 mm (7.9 in) |
| Z Axis Travel | 1,200 mm (47.2 in) |
| Rapid Traverse Xz | 24 m/min |
| Spindle Power Siemens | 14.4/11 kW (19.3/14.8 hp) |
| Spindle Power Fanuc | 11/9 kW (14.8/12.1 hp) |
| Spindle Speed Range | 50-3,500 rpm |
| Spindle Bore | 90 mm (3.5 in) |
| Spindle Nose | A2-8 |
| Bar Capacity | 75 mm (3.0 in) |
| Turret Stations | 8 |
| Max Boring Bar Diameter | 40 mm (1.6 in) |
| Tool Shank Size | 25 x 25 mm (1.0 x 1.0 in) |
| Tailstock Quill Diameter | 85 mm (3.3 in) |
| Tailstock Quill Stroke | 120 mm (4.7 in) |
| Tailstock Thrust | 500 kgf |
| Positioning Accuracy | 0.01 mm (0.0004 in) |
| Repeatability | 0.005 mm (0.0002 in) |
| Machine Weight | 4,900 kg (10,802 lb) |
| Machine Length | 3,625 mm (142.7 in) |
| Machine Width | 1,800 mm (70.9 in) |
| Machine Height | 1,715 mm (67.5 in) |
Specifications sourced from huron.fr — verified 2026-10-04
Strengths & Limitations
Strengths
- 1,200 mm of turning length with a 90 mm spindle bore
- 75 mm bar capacity, the largest in the DX 200 series
- A2-8 spindle nose for large power chucks
- 14.4/11 kW on the Siemens motor
- Tailstock thrust adjustable to 500 kgf
Limitations
- Maximum boring bar diameter is 40 mm
- Spindle limited to 3,500 rpm
- Fanuc motor listed at 11/9 kW
- Positioning of 0.01 mm over the 1,200 mm bed
Best For
Frequently Asked Questions
01
Maximum turning length is 1,200 mm and maximum turning diameter 365 mm. Spindle bore is 90 mm and bar capacity 75 mm, on an A2-8 nose.
02
Speed range is 50-3,500 rpm. Spindle motor power is 14.4/11 kW with Siemens and 11/9 kW with Fanuc. The nose is A2-8 and the bore 90 mm.
03
The turret has 8 stations. Tool size is 25 x 25 mm in cross-section and maximum boring bar diameter is 40 mm. Huron describes it as a bi-directional high-speed servo turret.
04
Approximately 3,625 mm long, 1,800 mm wide and 1,715 mm high, at approximately 4,900 kg (10,803 lb). Huron marks these values as approximate.
More from Huron
Other CNC Lathes / Turning Centers
Hyundai WIA E160
Hyundai WIA HD3100A/MA
Colchester Magnum HD CNC 800
Chevalier FBL-300LMC
Honor Seiki VL-100A/AR
