Huron AX MSY 200
Key Specifications
Max Spindle
Rapid Traverse
Spindle Power
Max Turn Length
Accuracy
Repeatability
How much does the Huron AX MSY 200 cost?
Price estimate
We do not have a price for the Huron AX MSY 200 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Huron AX MSY 200 is the full-specification version of the 200-size AX: live tools (M), a secondary spindle (S) and a Y axis (Y). With it a part can be turned and milled on one end, handed to the second spindle, and finished on the other end without leaving the machine.
The secondary spindle runs faster than the main one. It reaches 6,000 rpm with 7.5 kW and 95 Nm on an A2-5 nose, against 4,500 rpm, 9.2 kW and 175 Nm on the A2-6 main spindle. Both have a 65 mm bore. A lighter, quicker second spindle is appropriate, since back-end operations are usually facing, chamfering and a few holes.
In Huron's table the secondary spindle takes the place of the tailstock, so long slender shafts are better served by the AX MY 200. For bar-fed parts up to 52 mm the MSY arrangement is the efficient one, because the pick-off supports the part during cut-off.
Turning capacity is 330 mm (13.0 in) in diameter and 625 mm in length. Y travel is ± 40 mm. The 12-station turret takes BMT 45 holders and drives tools at up to 4,500 rpm. Rapids are 24 m/min on X and Y and 35 m/min on Z, and stated positioning is 0.005 mm. The machine is 4,280 mm wide and 2,436 mm deep.
Full Specifications
| Parameter | Value |
|---|---|
| Swing Over Bed | 550 mm (21.7 in) |
| Max Turning Diameter | 330 mm (13.0 in) |
| Max Turning Length | 625 mm (24.6 in) |
| X Axis Travel | 200 mm (7.9 in) |
| Z Axis Travel | 625 mm (24.6 in) |
| Y Axis Travel | ± 40 mm (± 1.6 in) |
| Rapid Traverse Rate | X-Y: 24 m/min; Z: 35 m/min |
| Max Spindle Speed | 4,500 rpm |
| Spindle Motor Power | 9.2 kW (12.3 hp) |
| Spindle Torque | 175 Nm (129.1 lb-ft) |
| Spindle Bore | 65 mm (2.6 in) |
| Spindle Nose | A2-6 |
| Bar Capacity | 52 mm (2.0 in) |
| Sub Spindle Speed | 6,000 rpm |
| Sub Spindle Power | 7.5 kW (10.1 hp) |
| Sub Spindle Torque | 95 Nm (70.1 lb-ft) |
| Sub Spindle Bore | 65 mm (2.6 in) |
| Sub Spindle Nose | A2-5 |
| Turret Type | Live tools |
| Turret Stations | 12 |
| Turret Tooling | BMT 45 |
| Live Tool Speed | 4,500 rpm |
| Positioning Accuracy | 0.005 mm (0.0002 in) |
| Repeatability | 0.003 mm (0.0001 in) |
| Machine Width | 4,280 mm (168.5 in) |
| Machine Depth | 2,436 mm (95.9 in) |
| Machine Height | 1,990 mm (78.3 in) |
Specifications sourced from huron.fr — verified 2026-10-04
Strengths & Limitations
Strengths
- Secondary spindle at up to 6,000 rpm for complete machining of both ends
- Y axis of ± 40 mm on the live-tool turret
- 65 mm bore on both spindles
- 12 driven stations at 4,500 rpm
- Same 4,280 x 2,436 mm footprint as the simpler AX M 200
Limitations
- No tailstock is listed for the MSY version
- Secondary spindle is rated 7.5 kW and 95 Nm
- Main spindle power is 9.2 kW
- A single turret serves both spindles, so the spindles cannot cut at the same time
Best For
Frequently Asked Questions
01
Huron's feature list spells them out: a live tool turret with 12 stations (M), a secondary spindle (S) and a Y axis (Y).
02
6,000 rpm maximum, 7.5 kW and 95 Nm, with a 65 mm bore and an A2-5 nose. The main spindle is rated 9.2 kW and 175 Nm at up to 4,500 rpm on an A2-6 nose.
03
Huron's table for the MSY version lists a secondary spindle and no tailstock rows. The AX M 200 and AX MY 200 are the versions listed with an MT 3 tailstock.
04
Maximum turning diameter is 330 mm and turning length 625 mm, over a 550 mm swing. Travels are 200 mm in X, 625 mm in Z and ± 40 mm in Y. Bar capacity is 52 mm.
More from Huron
Other CNC Lathes / Turning Centers
Tsugami M08SY-II
EMAG USC 850
Johnford ST-80CX
Spinner TC 800
Harrison Alpha 1550XS
