HNK VTC-50/60
Key Specifications
table diameter
max swing cutting diameter
max turning height
table speed turning 2 steps
max table load
c axis table speed
How much does the HNK VTC-50/60 cost?
Price estimate
We do not have a price for the HNK VTC-50/60 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The HNK VTC-50/60 has a 5,000 mm (196.9 in) table and a 6,000 mm (236.2 in) swing, and its turning tools move up to 60 x 60 mm (2.4 x 2.4 in) shanks. The milling side, by contrast, is carried over unchanged from the VTC-30/40: ISO 50, about 2,000 rpm, A.C 22/26 kW (29.5/34.9 hp) on a cont/30min basis.
This is the last size with that milling package. The VTC-60/70 above it has A.C 37/45 kW (49.6/60.3 hp) and a slower spindle. A buyer whose parts sit near the top of this machine's range and carry serious milled features should weigh that against the turning capacity alone.
For turning there is plenty in hand. The table motor is A.C 155 kW (207.9 hp), the load 60,000 kg (132,275 lb), the turning height 3,000 mm (118.1 in) and the speed about 50 rpm in two steps. X travel runs from -200 to +3,300 mm (-7.9 to +129.9 in), and the rail moves 250 mm (9.8 in) x 7 steps.
Ram section is 300 x 300, 350 x 350 or 400 x 400 mm (11.8 x 11.8, 13.8 x 13.8 or 15.7 x 15.7 in), with Z travel from 1,300 to 2,500 mm (51.2 to 98.4 in) in five listed lengths. C-axis: 0 to 0.3 rpm, 0.001 degree. Controls: Fanuc 31i-B, Siemens 840D.
Full Specifications
| Parameter | Value |
|---|---|
| Table Diameter | 5,000 mm (196.9 in) |
| Max Swing Cutting Diameter | 6,000 mm (236.2 in) |
| Max Turning Height | 3,000 mm (118.1 in) |
| Table Speed Turning 2 Steps | Max. ~50 rpm |
| Max Table Load | 60,000 kg (132,275 lb) |
| C Axis Table Speed | 0 ~ 0.3 rpm |
| C Axis Indexing | 0.001˚ |
| Table Drive Motor | A.C 155 kW (207.9 hp) (cont/30min) |
| X Axis Travel | -200 ~ +3,300 mm (-7.9 ~ +129.9 in) |
| Z Axis Travel | 1,300/1,500/2,000/2,200/2,500 mm (51.2/59.1/78.7/86.6/98.4 in) |
| Milling Spindle Speed | Max.~2,000 rpm |
| Milling Spindle Motor | A.C 22/26 kW (29.5/34.9 hp) (cont/30min) |
| Milling Spindle Taper | ISO 50 |
| Ram Size | 300 x 300/350 x 350/400 x 400 mm (11.8 x 11.8/13.8 x 13.8/15.7 x 15.7 in) |
| Tool Shank Size | 60 x 60 mm (2.4 x 2.4 in) |
| Cross Rail Vertical Travel | 250 mm (9.8 in) x 7 steps |
| CNC Control | Fanuc 31i-B, Siemens 840D |
Specifications sourced from en.hnkkorea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- A.C 155 kW (207.9 hp) table motor
- 60 x 60 mm (2.4 x 2.4 in) turning tool shank
- 6,000 mm (236.2 in) swing and 3,000 mm (118.1 in) turning height
- Milling spindle and C-axis on a 60,000 kg (132,275 lb) table
Limitations
- Milling motor is still A.C 22/26 kW (29.5/34.9 hp), as on the VTC-30/40
- Largest ram listed is 400 x 400 mm (15.7 x 15.7 in)
- C-axis speed is 0 to 0.3 rpm
Best For
Frequently Asked Questions
01
No. Its milling motor is A.C 22/26 kW (29.5/34.9 hp), identical to the VTC-30/40 and VTC-40/50. More milling power starts at the VTC-60/70 with A.C 37/45 kW (49.6/60.3 hp).
02
The tool shank size for turning tools is 60 x 60 mm (2.4 x 2.4 in). The VTC-40/50 and smaller sizes use 40 x 40 mm (1.6 x 1.6 in). The milling spindle taper remains ISO 50.
03
Table 5,000 mm (196.9 in), swing and cutting diameter 6,000 mm (236.2 in), turning height 3,000 mm (118.1 in), load 60,000 kg (132,275 lb), speed up to about 50 rpm in two steps, and an A.C 155 kW (207.9 hp) motor.
04
In X from -200 to +3,300 mm (-7.9 to +129.9 in). In Z the travel is one of five listed lengths between 1,300 and 2,500 mm (51.2 and 98.4 in). The cross rail adds 250 mm (9.8 in) x 7 steps of vertical positioning.
More from HNK
Other CNC Lathes / Turning Centers
Haas TL-2P
Takamaz XT-8MY
Goodway GVF-1112
INDEX G220 Plus
