Hartford HSA-732EA
Image: hartfordcnc.com, Hartford
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
max table load
t slots
How much does the Hartford HSA-732EA cost?
Price estimate
We do not have a price for the Hartford HSA-732EA that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
There is one seven-metre model with a 2,500 mm wide table in Hartford's five-face HSA range, and it is the HSA-732EA. The table is 7,000 x 2,500 mm (275.6 x 98.4 in), X travel 7,000 mm (275.6 in), Y travel 3,200 mm (126.0 in), and the load rating 25,000 kg (55,115 lb).
The combination is unusual within the line. At five and eight metres Hartford offers the 2,500 mm table with a shorter and a longer Y travel; at seven metres only the longer one is listed. For five-face work that is the more useful of the two, because an angular head can pass down either side of a part that covers the table.
Long, moderately wide work is the natural fit: rail vehicle underframe parts, machine tool beds, gantry beams, long welded frames. If the part is wider than 2,500 mm, the HSA-736EA has a 7,000 x 3,000 mm (275.6 x 118.1 in) table and 27,000 kg (59,524 lb).
X-axis ballscrew support is standard at this length. Twenty-seven T-slots run along the table. The spindle is #50 with a 6,000 rpm gear head, an optional 8,000 rpm gear head or a 10,000 rpm hybrid, and Z travel is 1,000 mm (1,200 mm optional).
Full Specifications
| Parameter | Value |
|---|---|
| Table Size | 7,000 x 2,500 mm (275.6 x 98.4 in) |
| Max Table Load | 25,000 kg (55,115 lb) |
| T-Slots | 28 x 250 (27) mm |
| X Axis Travel | 7,000 mm (275.6 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 1,000 (1,200) mm |
| Spindle Taper | #50 |
| Spindle Speed Gear | 6,000 (8,000) rpm |
| Spindle Speed Hybrid | 10,000 rpm |
| Tool Capacity | A: 32 (40 / 60) pcs |
| Tool Shank | BT-50 (CAT-50 / DIN50 / BBT-50) |
| Spindle Motor Power | 18.5 / 22 opt. 30 / 35 kW (Cont. / 30 min) |
Specifications sourced from hartfordcnc.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 7,000 mm (275.6 in) of X travel with X ballscrew support as standard
- 3,200 mm (126.0 in) of Y travel over a 2,500 mm table for side-face access
- 25,000 kg (55,115 lb) table load
- Head switching compartment and vertical and horizontal tool change
Limitations
- The only seven-metre choice at this table width
- Hartford's Y-axis ballscrew support statement does not cover x32 models
- Z travel is 1,000 mm unless the 1,200 mm option is ordered
Best For
Frequently Asked Questions
01
7,000 x 2,500 mm (275.6 x 98.4 in), carrying 25,000 kg (55,115 lb). The T-slot row of the table gives twenty-seven slots. X travel matches the table length at 7,000 mm.
02
Hartford's EA lineup has two seven-metre models. The HSA-732EA has the 2,500 mm wide table with 3,200 mm (126.0 in) of Y travel, and the HSA-736EA has a 7,000 x 3,000 mm (275.6 x 118.1 in) table with 3,600 mm (141.7 in) of Y.
03
Y travel is 3,200 mm (126.0 in) and the table is 2,500 mm (98.4 in) wide. The surplus is there so the spindle, with an angular head attached, can work outside the edges of a full-width part.
04
The standard motor is rated 18.5 / 22 kW (continuous / 30 min). A 30 / 35 kW motor is the listed option. Speeds are 6,000 rpm or 8,000 rpm with the gear head and 10,000 rpm with the hybrid spindle.
More from Hartford
Other 5-Axis Machining Centers
DMG Mori ULTRASONIC 60 eVo linear
Okuma MU-6300V
AWEA LP-5016YF
Yasda YMC 430 +RT10
Hedelius TILTENTA 10-3600
