Feeler SVW-3225
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
x axis travel
z axis travel
table length
How much does the Feeler SVW-3225 cost?
Price estimate
We do not have a price for the Feeler SVW-3225 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
In the Feeler SVW-3225 a 3,000 × 2,000 mm (118.1 × 78.7 in) table is combined with 3,200 mm (126.0 in) of X travel and a 12 ton rating, in the widest group of the SVW series.
A point to settle early: on the rows this page carries, the SVW-3225 and the SVW-3223 are identical. Same table, same X, same load, same rapids. What separates the 23 and 25 groups is the cross travel, and the Y-axis figure is not listed here. Before comparing quotations, get both Y strokes and the clearance between columns from the maker; a part with clamps overhanging the table edge may fit one and not the other.
For heavy cutting, Feeler points to the structure and the spindle. The body is box-type with reinforced ribs. The spindle has a fully geared internal transmission and a two-speed gearbox, 6,000 rpm on a BT/DIN/CAT 50 taper. A wide gantry carries its spindle head on a long crossrail, so rigidity claims deserve to be tested with a cutting trial on the buyer's own material, particularly with the head near mid-span.
X rapid is 12 m/min (472 ipm); Y and Z are 15 m/min (591 ipm). The bracketed spindle alternative is 8,000-15,000 rpm with #40, Z travel is 800 mm (31.5 in) or 1,000 mm (39.4 in), and the magazine row reads 24 (32/40/60).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 3,000 mm (118.1 in) |
| Table Width | 2,000 mm (78.7 in) |
| Max Table Load | 12 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
Specifications sourced from feeler.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 3,000 × 2,000 mm (118.1 × 78.7 in) table rated at 12 ton
- Two-speed geared spindle, 6,000 rpm on a 50 taper
- Y and Z rapids of 15 m/min (591 ipm) on a wide machine
- Automatic attachment change system available as an option
Limitations
- Listed rows are identical to the SVW-3223, so the Y travel must be obtained to tell them apart
- X rapid of 12 m/min (472 ipm), against 15 m/min on the SVW-2825
- No power, torque or machine weight published
Best For
Frequently Asked Questions
01
Not the same model, but the rows on this page match: 3,200 mm of X travel, a 3,000 × 2,000 mm table, 12 ton, and identical rapids, spindle and magazine. The Y-axis travel is what differs, and it is not listed here.
02
03
The series heading is Heavy Cutting Machines with Exceptional Rigidity. Feeler cites a box-type structure with reinforced rib design and a full-travel supported table that eliminates overhang. No stiffness or accuracy figures are published to quantify it.
04
Listed: 6,000 rpm, BT/DIN/CAT 50, 24 tools. Bracketed alternatives: 8,000-15,000 rpm, #40, and magazines of 32, 40 or 60 tools. The table does not say which combinations can be ordered together.
More from Feeler
Other Vertical Machining Centers (VMC)
Citizen Miyano VC03
Sharp KMA-2H-CNC
DN Solutions VM 6500
Chiron DZ 12W
Ecoca VB-1200
