Ermak Power-Bend Falcon 4270-260
Image: ermaksan.com.tr, Ermak
Key Specifications
bending length
bending power
distance between columns
y rapid speed
y working speed
y return speed
How much does the Ermak Power-Bend Falcon 4270-260 cost?
Price estimate
We do not have a price for the Ermak Power-Bend Falcon 4270-260 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Eighteen tonnes of machine stand behind the Ermak Power-Bend Falcon 4270-260. Ermak lists the weight as 18,000 kg, the bending power as 260 Ton (287 US tons) and the bending length as 4,270 mm (168.1 in).
It is a brake for long plate. The table is 200 mm wide, and a 22 kW motor with 300 L of oil provides the force. The ram approaches at 140 mm/s, forms at 10 mm/s and returns at 135 mm/s.
The frame keeps the 3,780 mm (148.8 in) column spacing of every 14 ft Falcon. Outside it measures 6,320 mm by 2,400 mm, and 3,070 mm in height.
One limit is worth stating plainly. The stroke is 275 mm and the daylight 550 mm, the same as on Falcons a third of this weight. For flat plate parts and open angles that is ample. For deep U sections the Power-Bend Falcon 4270-320, with 375 mm and 650 mm, is the machine to price.
Throat depth is 410 mm and table height 900 mm. The backgauge has 800 mm of X travel. Its 2 finger blocks sit on a beam more than four metres long, so narrow plate parts are gauged at one position unless the fingers are moved.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 4,270 mm (168.1 in) |
| Bending Power | 260 Ton (287 US tons) |
| Distance Between Columns | 3,780 mm (148.8 in) |
| Y Rapid Speed | 140 mm/s (5.51 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 135 mm/s (5.31 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 300 L (79.3 US gal) |
| Motor Power | 22 kW (29.5 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 200 mm (7.9 in) |
| Length | 6,320 mm (248.8 in) |
| Height | 3,070 mm (120.9 in) |
| Width | 2,400 mm (94.5 in) |
| Machine Weight | 18,000 kg (39,683 lb) |
Specifications sourced from ermaksan.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- 18,000 kg frame with 260 Ton on a 14 ft bed
- 200 mm table for plate dies
- 22 kW drive and 300 L oil capacity
- 3,780 mm column spacing for wide plate
Limitations
- Stroke 275 mm and daylight 550 mm despite the weight class
- 140 mm/s approach speed on the ram
- 3,070 mm high and 6,320 mm long
- Finger blocks are repositioned by hand
Best For
Frequently Asked Questions
01
18,000 kg. The machine is 6,320 mm long, 2,400 mm wide and 3,070 mm high, so both the floor and the access route need to be planned for a heavy, tall load.
02
The stroke is 275 mm inside 550 mm of daylight. Deep U sections are better served by the Power-Bend Falcon 4270-320, which has a 375 mm stroke and 650 mm of daylight.
03
A 22 kW motor and a hydraulic system holding 300 L of oil. Speeds are 140 mm/s in approach, 10 mm/s in the working stroke and 135 mm/s in return.
04
200 mm, at a height of 900 mm. A table of that width gives proper support to the wide V dies used for plate bending at this tonnage.
