Ermak Power-Bend Falcon 2100-60
Image: ermaksan.com.tr, Ermak
Key Specifications
bending length
bending power
distance between columns
y rapid speed
y working speed
y return speed
How much does the Ermak Power-Bend Falcon 2100-60 cost?
Price estimate
We do not have a price for the Ermak Power-Bend Falcon 2100-60 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Ermak Power-Bend Falcon 2100-60 is a 60 Ton (66 US tons) press brake with 2,100 mm (82.7 in) of bending length, the size at which the Falcon range first combines its standard ram geometry with motorized crowning.
Standard geometry means a 275 mm stroke, 530 mm of daylight and a 410 mm throat. Ermak carries those same three figures through most of the range, so tooling set-ups and part programs move between this machine and longer Falcons without rethinking clearances.
It is a narrow machine. Overall width is 1,870 mm, with a length of 4,015 mm and a height of 2,580 mm, and the weight is 5,085 kg. The side frames stand 1,700 mm (66.9 in) apart.
Where does it sit against its neighbours? The Power-Bend Falcon 2100-40 is lighter at 3,885 kg but gives up stroke and daylight. One step up in length, the Power-Bend Falcon 2600-60 keeps the 60 Ton rating and the 7.5 kW motor and has a 200 mm/s rapid approach.
Here the ram approaches at 160 mm/s, works at 10 mm/s and returns at 165 mm/s. The backgauge has 500 mm of X travel and 250 mm of R travel, with 2 finger blocks, and 2 sheet supports are fitted at the front. Oil capacity is 150 L.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 2,100 mm (82.7 in) |
| Bending Power | 60 Ton (66 US tons) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Y Rapid Speed | 160 mm/s (6.3 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 165 mm/s (6.5 in/s) |
| Crowning | Motorized |
| X Axis Travel | 500 mm (19.7 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 150 L (39.6 US gal) |
| Motor Power | 7.5 kW (10.1 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 530 mm (20.9 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 4,015 mm (158.1 in) |
| Height | 2,580 mm (101.6 in) |
| Width | 1,870 mm (73.6 in) |
| Machine Weight | 5,085 kg (11,210 lb) |
Specifications sourced from ermaksan.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- Standard Falcon ram geometry: 275 mm stroke, 530 mm daylight, 410 mm throat
- Motorized crowning under CNC control
- 1,870 mm overall width saves aisle space
- 7.5 kW motor with a 150 L oil tank
Limitations
- Backgauge X travel of 500 mm limits long flanges gauged from the rear
- 60 Ton over 2,100 mm will not bend thick plate at full length
- R axis travel is 250 mm, with no Z axes in the standard table
- Angle measurement systems are options only
Best For
Frequently Asked Questions
01
Bending length 2,100 mm, bending power 60 Ton, 1,700 mm between the columns, 275 mm stroke, 530 mm daylight and 410 mm throat depth. It weighs 5,085 kg.
02
The table gives 4,015 mm in length, 1,870 mm in width and 2,580 mm in height. Allow extra room at the rear for the backgauge and at the front for the sheet supports and the operator.
03
Ermak lists an X5 backgauge finger group as an option. It uses 5 servo motors and is quoted with a positioning accuracy of 0.05 mm. The standard unit is a two-axis X and R gauge.
04
It compensates for deflection of the beams under load so that the bend angle stays even along the part. Ermak describes it as CNC-controlled, with automatic deflection compensation.
