Yawei PBH-220/3100
Key Specifications
bending force
bending length
distance between columns
throat depth
ram stroke
die setting height
How much does the Yawei PBH-220/3100 cost?
Price estimate
We do not have a price for the Yawei PBH-220/3100 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
With 2,200 kN of bending force on a 3,100 mm (122.0 in) bed, the Yawei PBH-220/3100 is the three-metre, heavy-gauge model of the PBH series. Main motor power is 21.4 kW (28.7 hp).
The model sits at a turning point in the PBH table. Below it, the PBH-160/3100 and PBH-110/3100 use smaller motors and narrower frames. Above it, the PBH-250/3100 raises the force on this same frame, and its ram speeds drop to 120 mm/s; 12 mm/s; 130 mm/s. Here they are 150 mm/s; 13 mm/s; 150 mm/s.
That is a reasonable balance for a general heavy brake. It is quick enough for sheet work and strong enough for plate, with a 300 L oil tank and overall dimensions of 3,650 x 1,850 x 2,735 mm (143.7 x 72.8 x 107.7 in).
The frame gives a ram stroke of 215 mm (8.5 in), a die setting height of 530 mm (20.9 in) and a throat depth of 410 mm (16.1 in). Between the uprights there is 2,600 mm (102.4 in). Because the PBH is published as a bare table, the comparison a buyer can make is numerical only. Against Yawei's PBA-220/3100 this machine has a larger motor, 21.4 kW to 17 kW, and a slightly lower die height. What the two series fit as standard, crowning in particular, has to come from the supplier.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 2,200 kN |
| Bending Length | 3,100 mm (122.0 in) |
| Distance Between Columns | 2,600 mm (102.4 in) |
| Throat Depth | 410 mm (16.1 in) |
| Ram Stroke | 215 mm (8.5 in) |
| Die Setting Height | 530 mm (20.9 in) |
| Ram Speed | 150 mm/s; 13 mm/s; 150 mm/s |
| Main Motor Power | 21.4 kW (28.7 hp) |
| Oil Tank Volume | 300 L |
| Machine Dimensions | 3,650 x 1,850 x 2,735 mm (143.7 x 72.8 x 107.7 in) |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- 2,200 kN on a three-metre bed
- Ram speeds of 150 mm/s; 13 mm/s; 150 mm/s, faster than the PBH-250/3100 on the same frame
- 21.4 kW (28.7 hp) main motor, larger than the 17 kW (22.8 hp) of the PBA-220/3100
- Overall height under three metres
- A 300 L oil tank for the hydraulic system
Limitations
- Ram stroke of 215 mm (8.5 in)
- Die setting height of 530 mm (20.9 in)
- 2,600 mm (102.4 in) between uprights
- Standard equipment is not listed on the page
Best For
Frequently Asked Questions
01
Bending force of 2,200 kN over 3,100 mm (122.0 in), a ram stroke of 215 mm (8.5 in), a die setting height of 530 mm (20.9 in) and a main motor of 21.4 kW (28.7 hp).
02
Force, bed, throat and stroke agree. The PBA-220/3100 lists a 17 kW (22.8 hp) motor, a 550 mm (21.7 in) mould height and 160 mm/s; 12 mm/s; 150 mm/s. The PBH-220/3100 lists 21.4 kW (28.7 hp), 530 mm (20.9 in) and 150 mm/s; 13 mm/s; 150 mm/s.
03
Overall dimensions are 3,650 x 1,850 x 2,735 mm (143.7 x 72.8 x 107.7 in). The oil tank volume is 300 L. No machine weight is published.
04
Yes. The PBH-250/3100 has 2,500 kN with identical overall dimensions, motor and tank, and lower ram speeds of 120 mm/s; 12 mm/s; 130 mm/s.
