DN Solutions GT 2100

$55,000 - $80,000 Updated 2026-03-17

Key Specifications

Max Turning Diameter

360 mm (14.2 in)

Max Turning Length

510 mm (20.1 in)

Chuck Size

203 mm (8 in)

Spindle Bore

65 mm (2.6 in)

Spindle Speed

4,500 RPM

Spindle Motor

22 kW (30 hp)

Overview

The DN Solutions GT 2100 is a production-optimized CNC turning center built for shops that need reliable, high-throughput 2-axis turning at a competitive acquisition cost. Formerly marketed under the Doosan brand, the GT 2100 targets general machining and production environments where parts are turned in large quantities from bar stock or chuck fixtures — automotive components, hydraulic fittings, fasteners, and similar mid-volume work.

The GT 2100 is built around an 8-inch chuck with a 65 mm through-bore, a 22 kW (30 hp) spindle, and a maximum spindle speed of 4,500 RPM. The higher RPM ceiling compared to larger PUMA-series machines makes the GT 2100 more versatile for smaller-diameter aluminum and light alloy parts where surface speed matters. Maximum turning diameter is 360 mm (14.2 in) with a turning length up to 510 mm, keeping the machine compact and suited to production cells.

The linear guideway construction on the GT 2100 prioritizes fast rapid traverses (30 m/min) and light, quick passes over the box-way rigidity of the PUMA line. This trade-off is intentional: the GT 2100 is positioned for production runs with moderate cutting loads rather than heavy-duty roughing in tough alloys. The 8-station turret indexes quickly and keeps the machine footprint compact for high-density cell layouts.

Control is the Fanuc 0i-Plus with DN Solutions' 15-inch iHMI touchscreen, consistent with the broader DN Solutions lineup. The GT 2100 fits naturally into cells alongside DN Solutions DNM VMCs or LYNX lathes, simplifying training, programming, and spare parts management for shops standardizing on a single builder.

Full Specifications

Parameter	Value
Max Turning Diameter	360 mm (14.2 in)
Max Turning Length	510 mm (20.1 in)
Chuck Size	203 mm (8 in)
Spindle Bore	65 mm (2.6 in)
Spindle Speed	4,500 RPM
Spindle Motor	22 kW (30 hp)
Spindle Nose	A2-6
X / Z Axis Travel	180 mm x 530 mm (7.1 x 20.9 in)
Rapid Traverse	30 m/min (1,181 ipm) X & Z
Tool Capacity	8-station turret
Positioning Accuracy	±0.004 mm (±0.00016 in)
Repeatability	±0.002 mm (±0.00008 in)
CNC Control	Fanuc 0i-Plus with iHMI touchscreen
Machine Weight	3,500 kg (7,716 lb)

Specifications sourced from ellisontechnologies.com — verified 2026-03-28

Strengths & Limitations

Strengths

4,500 RPM spindle speed — higher than larger PUMA-series machines — enables good surface finishes on smaller-diameter aluminum and light alloy parts
Compact footprint and 3,500 kg machine weight make the GT 2100 easy to position in high-density production cells
Fanuc 0i-Plus control is universally familiar, reducing operator training time and simplifying integration with existing shop programs
Competitive price point in the $55,000–$80,000 range delivers strong value for shops needing reliable 2-axis production turning
Consistent with the broader DN Solutions lineup for spare parts, service, and training simplicity

Limitations

Linear guideway construction provides less vibration damping than box-way machines — not ideal for heavy interrupted cuts or tough alloys
8-station turret limits tool variety compared to 12-station competitors for complex multi-tool production programs
510 mm maximum turning length restricts the machine to shorter workpieces; longer shaft work requires the PUMA series

Best For

High-volume production turning of automotive components, hydraulic fittings, and fasteners from bar stock Shops needing a compact, affordable 2-axis lathe for light-to-medium duty turning in aluminum and mild steel Production cells alongside DN Solutions DNM VMCs or LYNX lathes where control and programming consistency matter Training environments or starter shops acquiring their first production CNC lathe at a manageable capital outlay

Frequently Asked Questions

01 How does the GT 2100 differ from the DN Solutions LYNX 2100?

The LYNX 2100 is positioned as a versatile, job-shop-friendly turning center with a focus on flexibility and ease of setup, while the GT 2100 targets higher-throughput production with a more streamlined configuration. The LYNX 2100 offers a wider range of options including live tooling and Y-axis variants. For pure 2-axis production volume, the GT 2100 is typically the more cost-effective choice.

02 Is the GT 2100 suitable for bar feeding automation?

Yes. The 65 mm through-bore accepts bar feeders rated for bar stock up to approximately 62 mm diameter. Short loaders and magazine-style bar feeders from LNS, Iemca, and similar suppliers are compatible. Bar feeder integration enables unattended production runs, making the GT 2100 practical for lights-out operation on repeat parts.

03 Does the GT 2100 offer a live tooling option?

The base GT 2100 is a 2-axis machine without live tooling. For off-center features, milling, and drilling, buyers should consider the GT 2100M variant or look at the DN Solutions LYNX 2100 series, which offers live tooling and Y-axis configurations.

04 How does the GT 2100 compare to the Haas ST-10?

Both are compact 2-axis production lathes in a similar price bracket. The GT 2100 offers a higher spindle speed ceiling (4,500 RPM vs 6,000 RPM on the ST-10) and comparable power. The Haas ST-10 benefits from Haas's larger North American service network and the widely-known NGC control. The GT 2100 provides Fanuc-based programming familiar to many production machinists and is backed by DN Solutions' global support infrastructure.

05 What materials is the GT 2100 best suited for?

The GT 2100 is best suited for aluminum, mild steel, stainless steel, and brass in moderate stock removal applications. Its linear guideway construction and 30 hp spindle handle these materials efficiently in production volumes. For continuous heavy roughing in Inconel, hardened steels, or large interrupted cuts, the box-way PUMA series provides better rigidity and vibration damping.