DN Solutions CNC Lathes / Turning Centers

Doosan Lynx 220LSYC

Est. $180,000 - $260,000 Possible older model Specs verified 2026-03-28 · machinetools.com Updated 2026-10-02

This model was not found in DN Solutions's current lineup when we checked on 2026-10-02 (lineup page). It may be a superseded or older model; the specifications below are as we last recorded them.

Key Specifications

Max Turn Length

500 mm (19.7 in)

chuck size

8 in (220 mm)

max turning diameter

360 mm (14.2 in)

main spindle speed

6,000 RPM

main spindle power

18.5/15 kW (25/20 hp)

spindle bore

51 mm (2.0 in)

How much does the Doosan Lynx 220LSYC cost?

Estimated price range

Est.$180,000 - $260,000

Our best estimate for a cnc lathes / turning center in this class — not a quote from DN Solutions. Configuration moves it a long way.

Overview

The Doosan Lynx 220LSYC is an 8 in chuck turning centre with a sub-spindle, a Y-axis and a 12-position live-tool turret, sized for parts up to 360 mm (14.2 in) in diameter and 500 mm (19.7 in) long. It is not in the current DN Solutions lineup and may be an older model; DN Solutions was called Doosan Machine Tools until 2022. The figures on this page come from a third-party listing and have not been checked against the manufacturer, so treat them as a starting point when looking at a used machine.

The listed main spindle runs to 6,000 RPM with 18.5/15 kW (25/20 hp) and has a 51 mm (2.0 in) bore, which caps bar work below that diameter. The sub-spindle is also listed at 6,000 RPM, so a part can be handed over at speed and finished on its back face without a second setup.

Milling capacity is defined by two rows. Driven tools are listed at 6,000 RPM, and the Y-axis stroke is ±52 mm (±2.0 in). That stroke is enough for off-centre holes, flats and keyways on parts of this size, but features further than 52 mm from the centreline need the C-axis or a different machine. Rapid traverse is listed as 30/20/30 m/min for X, Y and Z.

The listed control is a Fanuc 0iTF and the weight is approximately 7,200 kg (15,873 lb). No torque, tool-shank, footprint or coolant figures are given, so those have to come from the documents of the individual machine.

Full Specifications

Parameter	Value
Chuck Size	8 in (220 mm)
Max Turning Diameter	360 mm (14.2 in)
Max Turning Length	500 mm (19.7 in)
Main Spindle Speed	6,000 RPM
Main Spindle Power	18.5/15 kW (25/20 hp)
Spindle Bore	51 mm (2.0 in)
Y Axis Stroke	±52 mm (±2.0 in)
Driven Tool Speed	6,000 RPM
Sub Spindle Speed	6,000 RPM (C-axis, 4,000 RPM with live tools)
Turret Positions	12 (live tooling capable)
Rapid Traverse X Y Z	30/20/30 m/min
CNC Control	Fanuc 0iTF
Machine Weight	Approx. 7,200 kg (15,873 lb)

Specifications sourced from machinetools.com — verified 2026-03-28

Strengths & Limitations

Strengths

Sub-spindle listed at 6,000 RPM allows back-face work in the same cycle
Y-axis stroke of ±52 mm (±2.0 in) for off-centre drilling and milling
12-position turret listed as live tooling capable, with driven tools at 6,000 RPM
Main spindle listed at 6,000 RPM and 18.5/15 kW (25/20 hp)
Rapid traverse listed at 30/20/30 m/min on X, Y and Z

Limitations

Not in the current lineup, and the listed figures come from a third-party listing, not the manufacturer
Spindle bore of 51 mm (2.0 in) limits bar diameter
Y travel of ±52 mm (±2.0 in) restricts how far off-centre a milled feature can sit
No spindle torque, footprint or coolant data is listed

Best For

Done-in-one turned parts that need back-face work on the 6,000 RPM sub-spindle Shafts and fittings up to 360 mm (14.2 in) in diameter and 500 mm (19.7 in) long Cross-drilling, flats and keyways within the ±52 mm (±2.0 in) Y stroke Bar work that passes through a 51 mm (2.0 in) spindle bore

Frequently Asked Questions

01 Is the Doosan Lynx 220LSYC still sold?

It is not in the current DN Solutions lineup and may be an older model. The listed figures on this page are from a third-party listing, so anyone buying a used Lynx 220LSYC should confirm capacity, spindle ratings and options against the machine's own nameplate and manual.

02 What size parts does the Lynx 220LSYC turn?

The listed maximum turning diameter is 360 mm (14.2 in) and the maximum turning length is 500 mm (19.7 in). The spindle bore is 51 mm (2.0 in), which sets the upper limit for bar stock fed through the spindle; larger blanks have to be loaded as chucked pieces.

03 Does the Lynx 220LSYC have a Y-axis and live tools?

Yes, according to the listed figures. The Y-axis stroke is ±52 mm (±2.0 in), the turret has 12 positions and is described as live tooling capable, and driven tool speed is 6,000 RPM. Features that lie more than 52 mm off the spindle centreline are outside the Y stroke.

04 What control and spindle power does the Lynx 220LSYC have?

The listed control is a Fanuc 0iTF. Main spindle power is given as 18.5/15 kW (25/20 hp) at up to 6,000 RPM. The listing prints the power as a pair without saying which rating is short-time and which is continuous, and it gives no torque figure.