Dener TMC 1200
Key Specifications
Max Spindle
Spindle Taper
Table Size
Spindle Power
rapid traverse xyz
cutting feed rate
How much does the Dener TMC 1200 cost?
Price estimate
We do not have a price for the Dener TMC 1200 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Dener TMC 1200 is the mid-size model of Dener's vertical machining center range and the first with a larger frame. Travels are 1,200 mm (47.2 in) in X and 600 mm in both Y and Z, over a 1,300 x 600 mm table.
Table load doubles compared with the two smaller machines, to 1,000 kg (2,205 lb). That is the figure that opens up mould bases, welded fixtures and steel plate work.
The axis drives grow to match. Dener lists the axis motors as 3.5/3.5/3.5 kW. Rapid traverse stays at 36 m/min per axis and the cutting feed range is 1~15 m/min.
The spindle, however, is the same as on the small models: BBT 40, 10,000 rpm, 7.5/18 kW and 47.7/115 Nm. For a machine with a one-tonne table that is a light spindle. It is well suited to aluminium, to finishing and to moderate cuts in steel. Shops that rough heavily in steel should compare the TMC 1300, whose motor is listed at 11/30 kW.
Standard equipment includes C3 class ball screws, ball or roller linear guideways, rigid tapping and a spindle air-blow system. The control is a Mitsubishi M80A-8A.
Full Specifications
| Parameter | Value |
|---|---|
| Rapid Traverse Xyz | 36/36/36 m/min |
| Cutting Feed Rate | 1~15 m/min |
| X Axis Travel | 1,200 mm (47.2 in) |
| Y Axis Travel | 600 mm (23.6 in) |
| Z Axis Travel | 600 mm (23.6 in) |
| Table Size | 1,300 x 600 mm |
| Max Table Load | 1,000 kg (2,205 lb) |
| Spindle Taper | BBT 40 |
| Max Spindle Speed | 10,000 rpm |
| Spindle Motor Power | 7.5/18 kW |
| Spindle Torque | 47.7/115 Nm |
| Axis Motor Power Xyz | 3.5/3.5/3.5 kW |
Specifications sourced from en.dener.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 1,000 kg (2,205 lb) table load
- 600 mm of travel in both Y and Z
- 3.5/3.5/3.5 kW axis motors
- 36 m/min rapid traverse on every axis
- C3 class ball screws and rigid tapping as standard
Limitations
- Spindle motor is still 7.5/18 kW
- BBT 40 only; no larger taper is listed as an option
- Through-tool coolant must be ordered separately
Best For
Frequently Asked Questions
01
1,200 mm in X, 600 mm in Y and 600 mm in Z. The table is 1,300 x 600 mm and its load capacity is 1,000 kg (2,205 lb).
02
No. Both list a BBT 40 spindle at 10,000 rpm with 7.5/18 kW and 47.7/115 Nm. The TMC 1300 is the first model with the 11/30 kW motor.
03
Rapid traverse is 36/36/36 m/min in X, Y and Z, and the cutting feed rate is listed as 1~15 m/min. The axis motors are 3.5/3.5/3.5 kW.
04
Dener lists ball or roller linear guideways and C3 class precision ball screws as standard equipment. A linear encoder is optional.
More from Dener
Other Vertical Machining Centers (VMC)
Accuway UM-60
Johnford DMC-900
FANUC Robodrill α-D28LiB5ADV Plus Y500
Kitamura Mycenter-Zero
