Dener TDC 2112
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
Accuracy
How much does the Dener TDC 2112 cost?
Price estimate
We do not have a price for the Dener TDC 2112 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Dener TDC 2112 is a double column machining center with travels of 2,100 mm (82.7 in) in X, 1,220 mm in Y and 600 mm in Z. It is the smallest of the three TDC models, and by its figures the liveliest.
Rapid traverse is 24/24/15 m/min. The TDC 3116 is listed at 12 m/min on every axis, so this one moves at twice that rate in X and Y. For plate work with many holes and pockets that is a real saving.
The bridge stands on columns 1,400 mm apart over a table of 2,000 x 1,200 mm, rated for 4,000 kg (8,818 lb). The spindle is a BBT 50 direct-drive unit at 10,000 rpm with a motor listed at 22/26 kW.
Z travel is the limit to keep in view. 600 mm, minus tool length and fixture height, defines the tallest part. The model suits plates, frames and flat weldments more than tall housings.
Accuracy is stated per 300 mm of stroke: ±0.008 mm positioning and ±0.004 mm repeatability. The tool magazine holds 24 tools. Standard control is a Mitsubishi M80A-8A with Navi-Mill; a FANUC control is optional.
Full Specifications
| Parameter | Value |
|---|---|
| Rapid Traverse Xyz | 24/24/15 m/min |
| Cutting Feed Rate | 1~10 m/min |
| X Axis Travel | 2,100 mm (82.7 in) |
| Y Axis Travel | 1,220 mm (48 in) |
| Z Axis Travel | 600 mm (23.6 in) |
| Distance Between Columns | 1,400 mm (55.1 in) |
| Table Size | 2,000 x 1,200 mm |
| Max Table Load | 4,000 kg (8,818 lb) |
| Spindle Taper | BBT 50 |
| Tool Capacity | 24 tools |
| Max Spindle Speed | 10,000 rpm |
| Spindle Motor Power | 22/26 kW |
| Axis Motor Power Xyz | 9/4.5/4.5 kW |
| Positioning Accuracy | ±0.008 mm (per 300 mm stroke) |
| Repeatability | ±0.004 mm (per 300 mm stroke) |
Specifications sourced from en.dener.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 24 m/min rapid traverse in X and Y
- BBT 50 direct-drive spindle, 10,000 rpm, 22/26 kW
- 4,000 kg (8,818 lb) table load
- ±0.008 mm positioning per 300 mm of stroke
Limitations
- Z travel of 600 mm limits part height
- 24 tools, where the larger TDC models have 40
- 1,400 mm between columns limits part width
- No spindle torque figure in the table
Best For
Frequently Asked Questions
01
2,100 mm in X, 1,220 mm in Y and 600 mm in Z. The distance between columns is 1,400 mm and the table is 2,000 x 1,200 mm.
02
4,000 kg (8,818 lb). The TDC 3116 above it is rated for 10,000 kg, so the step between the two models is large.
03
A BBT 50 direct-drive spindle at 10,000 rpm. Spindle motor power is listed as 22/26 kW, and the axis motors as 9/4.5/4.5 kW.
04
Dener lists positioning accuracy of ±0.008 mm and repeatability of ±0.004 mm, each per 300 mm stroke. A linear encoder system is optional.
More from Dener
Other Vertical Machining Centers (VMC)
Accuway UM-160S
Johnford DMC-2100H
FANUC Robodrill α-D21SiB Plus
CHIRON DZ 15 W
Matsuura V.Plus-800
