Dener TMC 1600
Key Specifications
Max Spindle
Spindle Taper
Table Size
Spindle Power
rapid traverse xyz
cutting feed rate
How much does the Dener TMC 1600 cost?
Price estimate
We do not have a price for the Dener TMC 1600 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Largest of the range, the Dener TMC 1600 is a vertical machining center with 1,600 mm (63 in) of X travel and 700 mm in Y and Z. The table is 1,750 x 700 mm.
It is the long-bed version of the TMC 1300. The spindle is the same 11/30 kW, 77.8/191 Nm unit on a BBT 40 taper, the table load is the same 1,200 kg (2,646 lb), and so are the Y and Z travels. Only the X axis and the table differ.
What is 1,600 mm of X used for? Long parts, first of all: machine beds, rails, die shoes, extrusions. The other common use is pendulum-style work, with a fixture at each end of the table so that one is loaded while the other is cut. The 36 m/min rapid traverse keeps the move between them short.
The axis motors are listed as 3.5/3.5/4.5 kW, the largest Z motor in the range.
A long table with a 1,200 kg limit deserves the same caution as on the smaller machines. Fixture weight comes out of the same allowance as the part. The control is Mitsubishi M80A-8A as standard, with a FANUC 0i MF available as an option.
Full Specifications
| Parameter | Value |
|---|---|
| Rapid Traverse Xyz | 36/36/36 m/min |
| Cutting Feed Rate | 1~15 m/min |
| X Axis Travel | 1,600 mm (63 in) |
| Y Axis Travel | 700 mm (27.6 in) |
| Z Axis Travel | 700 mm (27.6 in) |
| Table Size | 1,750 x 700 mm |
| Max Table Load | 1,200 kg (2,646 lb) |
| Spindle Taper | BBT 40 |
| Max Spindle Speed | 10,000 rpm |
| Spindle Motor Power | 11/30 kW |
| Spindle Torque | 77.8/191 Nm |
| Axis Motor Power Xyz | 3.5/3.5/4.5 kW |
Specifications sourced from en.dener.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 1,600 mm X travel on a 1,750 x 700 mm table
- 11/30 kW spindle with 77.8/191 Nm
- Room for two fixtures and pendulum-style loading
- 3.5/3.5/4.5 kW axis motors
Limitations
- Table load is 1,200 kg (2,646 lb), no more than on the TMC 1300
- 10,000 rpm BBT 40 spindle is the only standard spindle
- Y travel of 700 mm limits plate width
Best For
Frequently Asked Questions
01
Axis travels are 1,600 mm in X, 700 mm in Y and 700 mm in Z, with a 1,750 x 700 mm table rated at 1,200 kg (2,646 lb).
02
No. Both list a BBT 40 spindle at 10,000 rpm with 11/30 kW of motor power and 77.8/191 Nm of torque. Only the X travel and table differ.
03
The table lists axis motor powers of 3.5/3.5/4.5 kW for X, Y and Z. Rapid traverse is 36 m/min on each axis, with cutting feeds of 1~15 m/min.
04
A Mitsubishi M80A-8A control with Navi-Mill, a 24-tool arm-type ATC, a fully enclosed cabin, a steel belt chip conveyor, automatic lubrication and rigid tapping.
More from Dener
Other Vertical Machining Centers (VMC)
Accuway UM-85
Johnford DMC-909
FANUC Robodrill α-D28MiB5ADV Plus
Akira Seiki HSC-M5
Litz AW-1000B
