AWEA LP-6021YZF
Image: awea.com, AWEA
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
How much does the AWEA LP-6021YZF cost?
Price estimate
We do not have a price for the AWEA LP-6021YZF that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Largest of AWEA's 5-face machines with 2,300 mm (90.6 in) between columns, the LP-6021YZF has 6,000 mm (236.2 in) of X, 2,800 mm (110.2 in) of Y and 1,000 mm (39.4 in) of Z. The table takes 18,000 kg (39,683 lb) and the machine weighs 45,000 kg (99,206 lb).
A machine like this is an installation project before it is a machining decision. The services in the table are a 120 liter hydraulic tank with a 10 HP pump, a 650 liter coolant tank with a 1.5 HP pump, a 6 liter lubrication tank and compressed air at 5 ~ 8 (5) kg/cm². No connected power figure is published, so that has to come from the maker with the quotation.
The cutting data suit slow, heavy work. A 4,000 rpm spindle is standard, and AWEA states 977 N-m at 254 rpm for its 4,000 rpm high torque spindle with a 26 kW motor. Cutting feed is 1 ~ 5,000 mm/min (0.04 ~ 197 ipm) and X rapid is 10,000 mm/min (394 ipm). Large face mills at low speed fit those numbers. Fast contouring over the full table doesn't.
Two siblings bracket it. The standard LP-6021 has the same 6,020 x 2,010 mm (237.0 x 79.1 in) table, load and weight, but 2,100 mm (82.7 in) of Y and 760 mm (29.9 in) of Z as standard. The LP-6025YZF goes wider and heavier, with a 6,020 x 2,400 mm (237.0 x 94.5 in) table, 20,000 kg (44,092 lb) of load and 53,000 kg (116,843 lb) of machine.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 2,800 mm (110.2 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 6,020 x 2,010 mm (237.0 x 79.1 in) |
| Max Table Load | 18,000 kg (39,683 lb) |
| Distance Spindle Nose to Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns | 2,300 mm (90.6 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 4,000 rpm (Std.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 197 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter (full magazine) | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P ≤ 0.050 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps ≤ 0.035 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 650 liter (1.5 HP) |
| Machine Weight | 45,000 kg (99,206 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 6,000 mm (236.2 in) of X with 1,000 mm (39.4 in) of Z, the largest envelope on the 2,300 mm column frame
- 18,000 kg (39,683 lb) table load
- Standard 4,000 rpm spindle, with 977 N-m at 254 rpm stated for the 4,000 rpm high torque design
- Weighs 45,000 kg (99,206 lb), less than the 53,000 kg (116,843 lb) of the LP-6025YZF
- Ball screw vibration absorber on the long X axis
Limitations
- Cutting feed of at most 5,000 mm/min (197 ipm)
- P ≤ 0.050 mm over full travel under VDI, the widest positioning figure of the group
- The table states no connected power figure for planning the electrical supply
- Part width is bounded by the 2,300 mm (90.6 in) column spacing and the 2,010 mm (79.1 in) table
Best For
Frequently Asked Questions
01
The table lists compressed air at 5 ~ 8 (5) kg/cm², a hydraulic unit with a 120 liter tank and 10 HP pump, a 6 liter lubrication oil tank and a 650 liter coolant tank with a 1.5 HP pump. A connected power figure is not given. The foundation has to carry 45,000 kg (99,206 lb) of machine plus up to 18,000 kg (39,683 lb) on the table.
02
AWEA describes a one-piece base structure with 4 guide ways, enlarged in proportion to the travel. The maker adds a note that X-axis travel longer than 6,000 mm may be built in two sections because of transport limits; the LP-6021YZF sits at 6,000 mm, so confirm the shipping arrangement when ordering.
03
The LP-6025YZF has a 6,020 x 2,400 mm (237.0 x 94.5 in) table, 3,200 mm (126.0 in) of Y, 2,700 mm (106.3 in) between columns, a 20,000 kg (44,092 lb) load and a weight of 53,000 kg (116,843 lb). The LP-6021YZF is the narrower machine, at 2,800 mm (110.2 in) of Y and 45,000 kg (99,206 lb). Z travel and X travel are identical.
04
Heavy cuts at modest feed. The standard spindle is 4,000 rpm on a 22 / 26 kW (30 / 35 HP) motor, and cutting feed is 1 ~ 5,000 mm/min (0.04 ~ 197 ipm). Built-in spindles of 6,000 / 8,000 rpm and direct drive spindles of 8,000 / 10,000 rpm are options, but the feed limit stays the same whichever spindle is fitted.
05
Under VDI AWEA lists Ps ≤ 0.035 mm repeatability and P ≤ 0.050 mm positioning over full travel. Under JIS the figures are ± 0.003 mm and ± 0.015 mm over full travel.
More from AWEA
Other 5-Axis Machining Centers
Breton Matrix E2 1100 K40
Hedelius TILTENTA 9-2600 MILLTURN
Vision Wide GSF-4032
Matsuura CUBLEX-35
Chiron DZ 15S
