AWEA LP-3021YZF
Image: awea.com, AWEA
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
How much does the AWEA LP-3021YZF cost?
Price estimate
We do not have a price for the AWEA LP-3021YZF that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
A 4,000 rpm spindle is standard on the AWEA LP-3021YZF, and that sets the character of the machine. For its 4,000 rpm high torque gear spindle AWEA states a maximum of 977 N-m at 254 rpm, from a 26 kW motor through a 2-speed gear box. This is a low-speed, high-torque 5-face bridge machine first, and a faster one only if ordered that way.
The frame around that spindle is the tall version of the 3,000 mm (118.1 in) size. Y travel is 2,800 mm (110.2 in), Z is 1,000 mm (39.4 in), and the spindle nose sits 200 ~ 1,200 mm (7.9 ~ 47.2 in) above the table. The LP-3021YF, built on the same 3,020 x 2,010 mm (118.9 x 79.1 in) table, has 2,400 mm (94.5 in) of Y, 760 mm (29.9 in) of Z and a 6,000 rpm spindle. Both machines are listed at 34,000 kg (74,956 lb).
Three faster spindle families appear as options. Built-in motorized spindles of 6,000 / 8,000 rpm are stated at up to 600 N-m at 350 rpm. Direct drive spindles of 8,000 / 10,000 rpm are stated at 165 N-m at 1,500 rpm, and AWEA says the direct drive layout separates motor heat from the spindle. With a direct drive spindle the Z axis can be built on roller type linear guide ways in place of the standard box way.
Short X travel keeps the machine quick and tight. X rapid is 20,000 mm/min (787 ipm), and VDI positioning is P ≤ 0.025 mm over full travel. The table takes 10,000 kg (22,046 lb).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 2,800 mm (110.2 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 3,020 x 2,010 mm (118.9 x 79.1 in) |
| Max Table Load | 10,000 kg (22,046 lb) |
| Distance Spindle Nose to Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns | 2,300 mm (90.6 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 4,000 rpm (Std.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 20,000 mm/min (787 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter (full magazine) | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P ≤ 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps ≤ 0.020 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 650 liter (1.5 HP) |
| Machine Weight | 34,000 kg (74,956 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Standard 4,000 rpm spindle; AWEA states 977 N-m at 254 rpm for its 4,000 rpm high torque gear spindle
- 1,000 mm (39.4 in) of Z and 2,800 mm (110.2 in) of Y on a 3,000 mm (118.1 in) machine
- Built-in 6,000 / 8,000 rpm and direct drive 8,000 / 10,000 rpm spindles available
- 20,000 mm/min (787 ipm) X rapid with P ≤ 0.025 mm VDI positioning
- Symmetrical head layout with the spindle, motor, ball screw and counter weight cylinders placed around the centre
Limitations
- The standard spindle tops out at 4,000 rpm; anything faster is an option
- Direct drive options are stated at 165 N-m, a small part of the gear spindle's 977 N-m
- Table load of 10,000 kg (22,046 lb), no more than the lower LP-3021YF
- Table width stays 2,010 mm (79.1 in) although Y travel is 2,800 mm (110.2 in)
Best For
Frequently Asked Questions
01
Because the table lists 4,000 rpm as the standard for the YZF models, and AWEA's 4,000 rpm high torque spindle is the strongest in the range: 977 N-m at 254 rpm with a 26 kW motor. The 6,000 rpm high torque spindle is stated at 642 N-m at 387 rpm. Lower top speed is the cost of the higher torque.
02
The LP-3021YZF has 2,800 mm (110.2 in) of Y, 1,000 mm (39.4 in) of Z, a nose-to-table range of 200 ~ 1,200 mm (7.9 ~ 47.2 in) and a 4,000 rpm standard spindle. The LP-3021YF has 2,400 mm (94.5 in) of Y, 760 mm (29.9 in) of Z, 200 ~ 960 mm (7.9 ~ 37.8 in) under the nose and a 6,000 rpm spindle. Table, load, rapids and accuracy rows match.
03
Yes. The options are built-in motorized spindles of 6,000 / 8,000 rpm and direct drive spindles of 8,000 / 10,000 rpm. AWEA gives up to 600 N-m at 350 rpm for the built-in design and 165 N-m at 1,500 rpm for direct drive, so the choice trades torque for speed.
04
A hardened and precisely ground box way as standard. AWEA states that the Z axis can be built with roller type linear guide ways if the machine is equipped with a high speed direct drive spindle. X and Y use roller type linear guide ways in every case.
More from AWEA
Other 5-Axis Machining Centers
DMG Mori HSC 55 linear
Vision Wide FA-3027
Kitamura Mytrunnion-5G
Spinner U5-1530
Mazak VORTEX e-V
