Akira Seiki SR32 XP
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
Accuracy
How much does the Akira Seiki SR32 XP cost?
Price estimate
We do not have a price for the Akira Seiki SR32 XP that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
With the SR32 XP, Akira Seiki moves the SR line onto a bigger casting. Travels are 815 mm (32.1 in) in X, 540 mm (21.3 in) in Y and 560 mm (22 in) in Z, and the table grows to 950 x 480 mm (37.4 x 19 in) with five 18 mm T-slots.
Compared with the SR3 XP the gain in X is small. The gain in Y, Z and capacity is not. Y goes from the 430 mm (16.9 in) of the SR3 XP to 540 mm (21.3 in), and the maximum table load on this machine is 1,080 kg (2,381 lb), with 900 kg (1,984 lb) as the standard figure. A 4th-axis table with a tailstock and a fixture plate sits comfortably inside that.
The spindle is BT40, 11,000 rpm, 18 HP (13.4 kW) peak. Magazine capacity is 24T. Rapids are 30 / 30 / 25 m/min (1,181 / 1,181 / 984 ipm), slower than the small-frame SR machines, which is the usual trade when the moving masses go up.
Plan the installation around 30 kVA, 0.5 MPa (72.5 psi) air and a 3,020 x 2,240 mm (119 x 88 in) floor area. The coolant tank holds 350 L (92.5 gal) and a chip screw clears the enclosure. Control: AKIRA Mi:845 (Fanuc G code compatible).
Full Specifications
| Parameter | Value |
|---|---|
| CNC Control | AKIRA Mi:845 (Fanuc G code compatible) |
| X Axis Travel | 815 mm (32.1 in) |
| Y Axis Travel | 540 mm (21.3 in) |
| Z Axis Travel | 560 mm (22 in) |
| Distance Spindle Nose to Table | 75~635 mm (3-25 in) |
| Spindle Center to Column Cover | 550 mm (21.7 in) |
| Table Size | 950 x 480 mm (37.4 x 19 in) |
| T-Slots | 18 mm x 80 mm pitch x 5 slots |
| Max Table Load | 1,080 kg (2,381 lb) |
| Standard Table Load | 900 kg (1,984 lb) |
| Spindle Motor Power | 18 HP (13.4 kW) |
| Max Spindle Speed | 11,000 rpm |
| Spindle Taper | BT40 |
| Rapid Traverse Xyz | 30 / 30 / 25 m/min (1,181 / 1,181 / 984 ipm) |
| Cutting Feed Rate | 12 / 12 / 10 m/min (472 / 472 / 394 ipm) |
| Positioning Accuracy | 0.01 mm (0.00039 in) |
| Repeatability | ±0.003 mm (±0.00012 in) |
| Tool Capacity | 24T |
| Max Tool Diameter (full magazine) | 80 mm (3.2 in) |
| Max Tool Diameter Without Adjacent Tools | 150 mm (5.9 in) |
| Max Tool Length | 250 mm (9.8 in) |
| Max Tool Weight | 7 kg (15 lb) |
| Tool Change Time | 2.2 s |
| Coolant Tank Capacity | 350 L (92.5 gal) |
| Chip Disposal | Chip Screw |
| Air Pressure Requirement | 0.5 MPa (72.5 psi) |
| Power Requirement | 30 kVA |
| Machine Dimensions | 3,020 x 2,240 mm (119 x 88 in) |
Specifications sourced from akiraseiki.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 540 mm (21.3 in) of Y and 560 mm (22 in) of Z on an 815 mm (32.1 in) X machine
- Maximum table load of 1,080 kg (2,381 lb)
- 18 HP (13.4 kW) peak spindle with a 24T magazine
- 350 L (92.5 gal) coolant tank
Limitations
- Rapids of 30 / 30 / 25 m/min (1,181 / 1,181 / 984 ipm) trail the 36 / 36 / 30 m/min of the SR3 XP
- Needs a 30 kVA supply, against 20 kVA for the SR3 XP
- Spindle speed tops out at 11,000 rpm
- X travel is only slightly longer than the 762 mm (30 in) of the SR3 XP
Best For
Frequently Asked Questions
01
X is 815 mm (32.1 in), Y 540 mm (21.3 in) and Z 560 mm (22 in). The table is 950 x 480 mm (37.4 x 19 in), and the spindle nose to table distance is 75~635 mm (3-25 in).
02
03
The SR42 XP, which keeps the 540 mm (21.3 in) Y and 560 mm (22 in) Z travels and extends X to 1,050 mm (41.3 in) on a 1,200 x 480 mm (47.2 x 19 in) table.
04
A 30 kVA electrical supply, compressed air at 0.5 MPa (72.5 psi) and 3,020 x 2,240 mm (119 x 88 in) of floor. The coolant tank capacity is 350 L (92.5 gal).
More from Akira Seiki
Other Vertical Machining Centers (VMC)
DMG Mori ecoMill 50
Haas VF-2SS Super Speed VMC
Litz VB-1100B/BG
Quaser MV4 (#50)
