AccuteX AU-600iA
Key Specifications
max workpiece size
max workpiece weight
x axis travel
y axis travel
z axis travel
uv axis travel
How much does the AccuteX AU-600iA cost?
Price estimate
We do not have a price for the AccuteX AU-600iA that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
AccuteX lists the AU-600iA as a 600 mm (23.6 in) by 400 mm (15.7 in) wire EDM whose Z axis can be ordered in two heights. The standard Z stroke is 300 mm (11.8 in), and the table marks Z400 as an option. The AU-6iA, with the same X and Y travel, is listed with the 300 mm (11.8 in) stroke only.
The remaining figures are those of a mid-size general machine. The maximum workpiece is 990 x 620 x 295 mm (39.0 x 24.4 x 11.6 in) at 600 kg (1,323 lb), U and V travel is 100 x 100 mm (3.9 x 3.9 in) and the maximum cutting taper ±21° H=100. The machine weighs 3,700 kg (8,157 lb), holds 850 L in its water system and takes a 10 kg (22 lb) spool. Its listed footprint is 2,950 x 2,560 x 2,210 mm (116.1 x 100.8 x 87.0 in). The workpiece size AccuteX prints is for the standard column; it gives no envelope or footprint for the taller option.
This product page is thinner than the others in the AU series. It has the machine table but no controller table, so the control hardware and axis count are not documented for this model. Take those from the quotation.
What the page does describe is the drive and the threader. Axes run on C1 class ball screws with AC servomotors, and a linear scale is an option. The AWT is said to thread a wire above 0.25mm directly at the break point in a workpiece of 300mm, which is the full standard Z stroke of this machine.
Full Specifications
| Parameter | Value |
|---|---|
| Max Workpiece Size | 990 x 620 x 295 mm (39.0 x 24.4 x 11.6 in) (L x W x H) |
| Max Workpiece Weight | 600 kg (1,323 lb) |
| X Axis Travel | 600 mm (23.6 in) |
| Y Axis Travel | 400 mm (15.7 in) |
| Z Axis Travel | 300 mm (11.8 in) (Opt. Z400) |
| Uv Axis Travel | 100 x 100 mm (3.9 x 3.9 in) |
| Wire Spool Weight | 10 kg (22 lb) |
| Machine Dimensions | 2,950 x 2,560 x 2,210 mm (116.1 x 100.8 x 87.0 in) |
| Machine Weight | 3,700 kg (8,157 lb) |
| Water System Capacity | 850 L |
| Max Cutting Taper | ±21° H=100 |
Specifications sourced from accutex.com.tw — verified 2026-10-05
Strengths & Limitations
Strengths
- Z stroke of 300 mm (11.8 in) with a Z400 option marked in the specification table
- 600 mm (23.6 in) by 400 mm (15.7 in) of X and Y travel with 100 x 100 mm (3.9 x 3.9 in) on U and V
- 850 L water system and a 3,700 kg (8,157 lb) machine weight are both stated on the page
- AWT described as threading wire above 0.25mm at the break point in a workpiece of 300mm
Limitations
- The page has no controller table, so control hardware and axis count are not documented for this model
- Workpiece weight is 600 kg (1,323 lb), below the 800 kg (1,764 lb) of the AU-6iA
- No workpiece envelope, footprint or weight is given for the Z400 option
- Wire spool is 10 kg (22 lb)
Best For
Frequently Asked Questions
01
The standard Z stroke is 300 mm (11.8 in). AccuteX's table adds "Opt.Z400" beside it, indicating a taller column as an option. The page gives the 990 x 620 x 295 mm (39.0 x 24.4 x 11.6 in) workpiece size for the standard machine only, so ask for the envelope and footprint of the taller version.
02
Travels are the same. The AU-6iA is listed with an 800 kg (1,764 lb) workpiece and a machine weight of 3,500 kg (7,716 lb). The AU-600iA is listed with 600 kg (1,323 lb), 3,700 kg (8,157 lb), an 850 L water system and the Z400 option. Its footprint is 2,950 x 2,560 x 2,210 mm (116.1 x 100.8 x 87.0 in).
03
Maximum cutting taper is ±21° H=100 with 100 x 100 mm (3.9 x 3.9 in) of U and V travel. The wire spool weight is 10 kg (22 lb). Larger AU models such as the AU-750iA take a 16 kg (35 lb) spool, which matters for long unattended cuts.
04
AccuteX says there is no need to return to the start point before threading: the system threads the wire at the break point, with what the maker calls nearly 100% possibility. The wire is first annealed straight by an impulse circuit and its end melted to a bullet shape of about 0.8mm.
