Yawei PBE-110/3100
Key Specifications
bending force
table length
distance between columns
throat depth
ram stroke
die setting height
How much does the Yawei PBE-110/3100 cost?
Price estimate
We do not have a price for the Yawei PBE-110/3100 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Yawei PBE-110/3100 is the largest press brake in Yawei's PBE electric servo drive series, with 1,100 kN of nominal force on a 3,100 mm (122.0 in) table. The series is fully electric and oil-free, which Yawei links to low energy use and low maintenance.
The comparison with Yawei's own hybrid of equal force and length shows what the electric drive changes. The PBM-110/3100 weighs 9,000 kg (19,841 lb) and lists 20 mm/s as its middle slider speed. The PBE-110/3100 weighs 7,500 kg (16,534 lb) and lists 180 mm/s; 30 mm/s; 180 mm/s, so the pressing figure is half as high again.
Geometry matches the hydraulic machines in throat and height: 410 mm (16.1 in) of throat opening and 600 mm (23.6 in) of mould height, with 2,600 mm (102.4 in) between columns. Stroke is shorter at 215 mm (8.5 in). Overall the machine measures 3,580 x 1,570 x 2,715 mm (140.9 x 61.8 x 106.9 in).
Yawei's table prints the motor power for this model without a unit, so it is not repeated here; ask for the connected load. The control hangs on a cantilever arm. The series text also mentions an adjustable working table height, a feature aimed at the small models that an operator may run seated. No hydraulic oil means no tank, no oil changes and no warm-up drift, the usual arguments for an electric brake.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 1,100 kN |
| Table Length | 3,100 mm (122.0 in) |
| Distance Between Columns | 2,600 mm (102.4 in) |
| Throat Depth | 410 mm (16.1 in) |
| Ram Stroke | 215 mm (8.5 in) |
| Die Setting Height | 600 mm (23.6 in) |
| Ram Speed | 180 mm/s; 30 mm/s; 180 mm/s |
| Machine Dimensions | 3,580 x 1,570 x 2,715 mm (140.9 x 61.8 x 106.9 in) |
| Machine Weight | 7,500 kg (16,534 lb) |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- Fully electric and oil-free at 1,100 kN and 3,100 mm
- Middle slider speed of 30 mm/s, against 20 mm/s on the hybrid PBM-110/3100
- Weighs 7,500 kg (16,534 lb), less than the 9,000 kg (19,841 lb) of the PBM-110/3100
- 410 mm throat and 600 mm mould height, as on Yawei's hydraulic models
- Low energy consumption and low maintenance, as described by Yawei
Limitations
- Slider stroke of 215 mm (8.5 in); the PBM-110/3100 has 265 mm (10.4 in)
- Motor power is printed without a unit in Yawei's table
- First and third slider speeds of 180 mm/s are the lowest in the PBE series
- 1,100 kN is the ceiling of the electric range
Best For
Frequently Asked Questions
01
Yes. Yawei describes the PBE series as fully electric and oil-free, with low energy consumption and low maintenance. This model applies 1,100 kN of nominal force over a table length of 3,100 mm (122.0 in).
02
Force and table length are the same. The PBE-110/3100 lists slider speeds of 180 mm/s; 30 mm/s; 180 mm/s, a 215 mm (8.5 in) stroke and 7,500 kg (16,534 lb). The PBM-110/3100 is a hybrid with 250 mm/s; 20 mm/s; 220 mm/s, a 265 mm (10.4 in) stroke and 9,000 kg (19,841 lb).
03
Overall dimensions are 3,580 x 1,570 x 2,715 mm (140.9 x 61.8 x 106.9 in) as length, width and height. The total weight of the machine is 7,500 kg (16,534 lb).
04
Column spacing is 2,600 mm (102.4 in), throat opening 410 mm (16.1 in), slider stroke 215 mm (8.5 in) and mould height 600 mm (23.6 in).
