Yawei PBC-110/3100
Key Specifications
bending force
bending length
distance between columns
throat depth
ram stroke
die setting height
How much does the Yawei PBC-110/3100 cost?
Price estimate
We do not have a price for the Yawei PBC-110/3100 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Yawei PBC-110/3100 is where the PBC series moves onto its full-size frame. Bending pressure is 1,100 kN over 3,100 mm (122.0 in), with a throat depth of 410 mm (16.1 in), a slider travel of 265 mm (10.4 in) and a mould height of 600 mm (23.6 in).
Those three frame figures hold for every larger PBC, so this is the smallest machine in the series that shares setups with the rest. It is also the quickest of them. Slider speeds are 220 mm/s; 18 mm/s; 200 mm/s, and the first figure falls on the PBC-160/3100 and PBC-220/3100.
A three-metre, 1,100 kN machine is the general-purpose size, and Yawei lists one in most of its series. The hybrid PBM-110/3100 is heavier at 9,000 kg (19,841 lb) and lists 20 mm/s in the pressing position. The dual-servo PBG-110/3100 weighs 7,000 kg (15,432 lb). This PBC, at 8,500 kg (18,739 lb), is the conventional choice of the group, with a single 12.4 kW (16.6 hp) main motor and a 200 L tank.
What Yawei lists in its favour is mechanical: crowning in the worktable that is adjusted point by point, a dual rail slider guide, and a linear-guided material holder at the front. Overall dimensions are 3,600 x 1,520 x 2,850 mm (141.7 x 59.8 x 112.2 in).
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 1,100 kN |
| Bending Length | 3,100 mm (122.0 in) |
| Distance Between Columns | 2,600 mm (102.4 in) |
| Throat Depth | 410 mm (16.1 in) |
| Ram Stroke | 265 mm (10.4 in) |
| Die Setting Height | 600 mm (23.6 in) |
| Ram Speed | 220 mm/s; 18 mm/s; 200 mm/s |
| Main Motor Power | 12.4 kW (16.6 hp) |
| Oil Tank Volume | 200 L |
| Machine Dimensions | 3,600 x 1,520 x 2,850 mm (141.7 x 59.8 x 112.2 in) |
| Machine Weight | 8,500 kg (18,739 lb) |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- Full-size PBC frame: 410 mm throat, 265 mm travel, 600 mm mould height
- Slider speeds of 220 mm/s; 18 mm/s; 200 mm/s, the fastest set among the full-size PBC models
- Point-by-point mechanical crowning in the worktable
- Single 12.4 kW (16.6 hp) main motor
- Narrow at 1,520 mm overall width
Limitations
- 3,100 mm bending length will not take four-metre sheet; that needs the PBC-110/4100
- 2,600 mm (102.4 in) between columns
- Pressing position of 18 mm/s is below the 20 mm/s of the PBM-110/3100
- Control and backgauge are not specified on the page
Best For
Frequently Asked Questions
01
Bending pressure 1,100 kN, bending length 3,100 mm (122.0 in), distance between columns 2,600 mm (102.4 in), throat depth 410 mm (16.1 in), slider travel 265 mm (10.4 in) and mould height 600 mm (23.6 in).
02
Force, length and frame figures agree. The PBM-110/3100 is an oil-electric hybrid with 5.5 x 2 kW of motor power and 9,000 kg (19,841 lb). The PBC-110/3100 has a 12.4 kW (16.6 hp) main motor and weighs 8,500 kg (18,739 lb).
03
A mechanical crowning system in the worktable, adjustable point by point. Yawei says this gives high precision and consistency along the bend.
04
Overall dimensions are 3,600 x 1,520 x 2,850 mm (141.7 x 59.8 x 112.2 in). Machine weight is 8,500 kg (18,739 lb) and the oil tank volume is 200 L.
