Vision Wide Vertical Machining Centers (VMC)

Vision Wide NF-4023 / NF-4030

Q: How much does the Vision Wide NF-4023 / NF-4030 cost?

The price estimate for the Vision Wide NF-4023 / NF-4030 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/vision-wide-nf-4023-nf-4030#price; the request is passed to Vision Wide or an authorised dealer.

Specs verified 2026-10-04 · visionwide-tech.com Updated 2026-10-04

Image: visionwide-tech.com, Vision Wide

Key Specifications

Table Size

4,000×2,050 mm (157.5×80.7 in)

x axis travel

4,100 mm (161.4 in)

y axis travel

2,300/ 3,000 mm (90.6/ 118.1 in)

z axis travel box way single ballscrew

920 / 1,020 mm (36.2 / 40.2 in)(Opt.)

z axis travel linear way enclosed box ram dual ballscrews

1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.)

max table load

16,000 kg (35,273 lb)

How much does the Vision Wide NF-4023 / NF-4030 cost?

Price estimate

Uncertain

We do not have a price for the Vision Wide NF-4023 / NF-4030 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

At four metres the NF frame gains a part the shorter machine does not need. The Vision Wide NF-4023 / NF-4030 has 4,100 mm (161.4 in) of X travel, and Vision Wide's standard list includes an X, Y-axis ballscrew support device where the X axis is 4 m or more or the Y axis 3 m or more.

A long ballscrew sags under its own weight and whips as it turns. Supporting it between the bearings lets it run at speed without vibration that would show in the surface. Even so the rapid falls with length: the X/Y rapid here is 18 m/min, where the NF-3023 lists 24 m/min.

On the NF-4030, the wider model of the pair, Y travel is 3,000 mm (118.1 in), so by the maker's rule the Y screw is supported too. The NF-4023 has 2,300 mm (90.6 in) of Y.

Both share a 4,000×2,050 mm (157.5×80.7 in) table rated for 16,000 kg (35,273 lb). The standard spindle is the box way 2-step gear type at 4,000 rpm, on an 18.5/22 kW (24.8/29.5 hp) motor. Z travel with that head is 920 mm, or 1,020 mm as an option, and the cutting feed range is 1-10,000 mm/min.

Full Specifications

Parameter	Value
X Axis Travel	4,100 mm (161.4 in)
Y Axis Travel	2,300/ 3,000 mm (90.6/ 118.1 in)
Z Axis Travel Box Way Single Ballscrew	920 / 1,020 mm (36.2 / 40.2 in)(Opt.)
Z Axis Travel Linear Way Enclosed Box Ram Dual Ballscrews	1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.)
Table Size	4,000×2,050 mm (157.5×80.7 in)
Max Table Load	16,000 kg (35,273 lb)
Spindle Power Cont 30 Min	18.5/22 kW (24.8/29.5 hp)(22/26 kW (29.5/34.9 hp) Opt.)(30/37 kW (40.2/49.6 hp) Opt.)
Spindle Speed Box Way 2 Step Gear	4,000 / 6,000 rpm(Opt.)
Spindle Speed Linear Way Enclosed Box Ram 2 Step Gear	4,000 / 6,000 rpm(Opt.)
Spindle Speed Linear Way Enclosed Box Ram Direct Driven	10,000 rpm(Opt.)
Cutting Feed Rate	1-10,000 mm/min
Rapid Traverse Xy	18 m/min
Rapid Traverse Z Box Way or Linear Way	15 m/min
Rapid Traverse Z Enclosed Box Ram	12 m/min
Tool Capacity Vertical Tool Change	32 / 40 pcs (Opt.) / 60 pcs (Opt.)
Tool Capacity Floor Standing Vertical Tool Change	32 pcs(Opt.) / 40 pcs (Opt.) / 60 pcs (Opt.)
Tool Capacity Floor Standing Vertical Horizontal Tool Change	32 pcs(Opt.) / 40 pcs (Opt.) / 60 pcs (Opt.)

Specifications sourced from visionwide-tech.com — verified 2026-10-04

Strengths & Limitations

Strengths

X, Y-axis ballscrew support device is standard on axes of 4 m (X) or 3 m (Y) and above
4,000×2,050 mm (157.5×80.7 in) table for 16,000 kg (35,273 lb)
Choice of 2,300 mm (90.6 in) or 3,000 mm (118.1 in) of Y travel
Cutting feed up to 10,000 mm/min

Limitations

X/Y rapid of 18 m/min, below the 24 m/min of the NF-3023
Z travel of 920 mm on the standard box way head
The standard gear spindle tops out at 4,000 rpm

Best For

Machine bases and frames around 4 m long Five-face work on parts up to 16,000 kg (35,273 lb) Low-speed, high-load milling in iron and steel

Frequently Asked Questions

01 What is the ballscrew support device on the Vision Wide NF-4023?

Vision Wide's standard accessory list has an X, Y-axis ballscrew support device for machines with an X axis of 4 m or more or a Y axis of 3 m or more. The NF-4023 / NF-4030 has 4,100 mm (161.4 in) of X travel.

02 What Y travel do the NF-4023 and NF-4030 have?

The row reads 2,300/ 3,000 mm (90.6/ 118.1 in): 2,300 mm for the NF-4023 and 3,000 mm for the NF-4030. The table is 2,050 mm (80.7 in) wide on both.

03 How much does the NF-4023 table carry?

16,000 kg (35,273 lb) on a 4,000×2,050 mm (157.5×80.7 in) table. The shorter NF-3023 carries 13,000 kg (28,660 lb) and the longer NF-5023 carries 20,000 kg (44,092 lb).

04 What is the Z travel of the NF-4023 / NF-4030?

With the box way head and single ballscrew it is 920 mm, or 1,020 mm as an option. The linear way and enclosed box ram heads with dual ballscrews are listed at 1,000 mm, 1,200 mm and 1,400 mm, all optional.