TRUMPF TruPrint 3000

Est. $500,000 – $900,000 Updated 2026-10-03

Successor: ATLIX xBUILD 3000. TRUMPF's additive manufacturing business was carved out as the independent company ATLIX in 2025, and its range now carries the xBUILD name. (source)

Key Specifications

build cylinder

300 mm diameter × 400 mm height

laser power

500 W (single) or 1,000 W (dual)

laser type

Fiber laser (TruFiber)

layer thickness

20–150 μm

build rate

Up to 35 cm³/hour (dual laser)

max preheating

500°C

How much does the TRUMPF TruPrint 3000 cost?

Estimated price range

Est.$500,000 – $900,000

Our best estimate for a metal additive manufacturing in this class — not a quote from Trumpf. Configuration moves it a long way.

Overview

The TruPrint 3000 is listed as a metal additive manufacturing machine with a build cylinder 300 mm in diameter and 400 mm high. Its laser is a TruFiber fiber laser, given as 500 W (single) or 1,000 W (dual), and the build rate of up to 35 cm³/hour is quoted for the dual laser.

Layer thickness spans 20–150 μm, a wide window that lets a build trade surface detail at the thin end for speed at the thick end. Maximum preheating is 500°C. The listed materials are stainless steel, titanium, nickel alloys, aluminum and tool steel.

Two things are left open by the listed figures. No build rate is given for the single 500 W configuration, so the 35 cm³/hour figure should not be applied to it. And the machine weight of about 3,500 kg is the only installation figure, which leaves footprint, power and gas supply to be confirmed.

Full Specifications

Parameter	Value
Build Cylinder	300 mm diameter × 400 mm height
Laser Power	500 W (single) or 1,000 W (dual)
Laser Type	Fiber laser (TruFiber)
Layer Thickness	20–150 μm
Build Rate	Up to 35 cm³/hour (dual laser)
Max Preheating	500°C
Materials	Stainless steel, titanium, nickel alloys, aluminum, tool steel
Machine Weight	~3,500 kg

Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.

Strengths & Limitations

Strengths

Build cylinder of 300 mm diameter × 400 mm height
Dual-laser configuration listed at 1,000 W, with a build rate of up to 35 cm³/hour
Maximum preheating of 500°C
Layer thickness adjustable across 20–150 μm

Limitations

The 35 cm³/hour build rate is for the dual laser; nothing is listed for the single 500 W configuration
A part wider than the 300 mm cylinder diameter does not fit, whatever its height
Weight is the only installation figure listed, at about 3,500 kg

Best For

Metal parts that fit a 300 mm diameter × 400 mm height build cylinder Stainless steel, titanium, nickel alloy, aluminum and tool steel parts Builds that call for preheating, up to 500°C

Frequently Asked Questions

01 How big a part can the TruPrint 3000 build?

The build cylinder is listed as 300 mm in diameter and 400 mm in height. Because the space is round, the part and its supports have to fit inside a 300 mm circle, not a 300 mm square.

02 What laser configurations are listed for the TruPrint 3000?

A TruFiber fiber laser at 500 W in the single configuration or 1,000 W in the dual configuration. The build rate of up to 35 cm³/hour is given for the dual laser only.

03 Which materials does the TruPrint 3000 process?

The listed materials are stainless steel, titanium, nickel alloys, aluminum and tool steel. Layer thickness ranges across 20–150 μm and preheating goes up to 500°C.