TOS Kuřim FRUF-C 300-800

Q: How much does the TOS Kuřim FRUF-C 300-800 cost?

The price estimate for the TOS Kuřim FRUF-C 300-800 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/tos-kurim-fruf-c-300-800#price; the request is passed to TOS Kuřim or an authorised dealer.

Specs verified 2026-10-04 · tos-kurim.cz Updated 2026-10-04

Key Specifications

Max Spindle

2,500 rpm

x axis travel

5,000 - 25,000 by 1,000 mm (196.9 - 984.3 by 39.4 in)

y axis travel

5,200 - 10,200 mm (204.7 - 401.6 in)

z axis travel

1,500/2,000 mm (59.1/78.7 in)

w axis travel cross rail

2,800/3,800/4,800 mm (110.2/149.6/189.0 in)

feed range x

1 - 15,000 mm/min

How much does the TOS Kuřim FRUF-C 300-800 cost?

Price estimate

Uncertain

We do not have a price for the TOS Kuřim FRUF-C 300-800 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

The TOS Kuřim FRUF-C 300-800 is the largest gantry machining centre in the catalogue: 100/113 kW (134/152 hp) of drive power, a cross-rail that travels as much as 4,800 mm, and up to 6,500 mm of clearance beneath it. The gantry moves along X and the cross-rail along W.

Start with height, because that is what sets this machine apart. Clearance between table and cross-rail is listed as 3,500 - 6,500 mm (137.8 - 255.9 in). The W axis is offered in three strokes, 2,800/3,800/4,800 mm (110.2/149.6/189.0 in), and the ram adds a Z of 1,500/2,000 mm (59.1/78.7 in). No other gantry in the range comes close in the vertical direction.

Across the machine, Y travel is 5,200 - 10,200 mm (204.7 - 401.6 in) with 4,000 - 9,000 mm (157.5 - 354.3 in) between the columns. Lengthwise, X is 5,000 - 25,000 by 1,000 mm (196.9 - 984.3 by 39.4 in).

The headstock is the slow, strong one. Spindle speed is 2,500 rpm. X, Y and Z feed at 1 - 15,000 mm/min with nothing higher in brackets, and W at 1 - 2,000 mm/min, with 1 - 4,000 mm/min in brackets. Tall, heavy parts are usually turned as well as milled, and the series is described as a multifunctional design with carousel and grinding function; rotary tables with carousel function are among the listed workspace options. Before anything else, ask about the building. A machine with these clearances needs crane height and foundation work the catalogue does not describe.

Full Specifications

Parameter	Value
X Axis Travel	5,000 - 25,000 by 1,000 mm (196.9 - 984.3 by 39.4 in)
Y Axis Travel	5,200 - 10,200 mm (204.7 - 401.6 in)
Z Axis Travel	1,500/2,000 mm (59.1/78.7 in)
W Axis Travel Cross Rail	2,800/3,800/4,800 mm (110.2/149.6/189.0 in)
Feed Range X	1 - 15,000 mm/min
Feed Range Y	1 - 15,000 mm/min
Feed Range Z	1 - 15,000 mm/min
Feed Range W	1 - 2,000 mm/min (1 - 4,000 mm/min)
Clearance Between Columns	4,000 - 9,000 mm (157.5 - 354.3 in)
Clearance Table to Cross Rail	3,500 - 6,500 mm (137.8 - 255.9 in)
Max Spindle Speed	2,500 rpm
Drive Power	100/113 kW (134/152 hp)
Workspace	optional (rotary tables, clamping plates)

Specifications sourced from tos-kurim.cz — verified 2026-10-04

Strengths & Limitations

Strengths

Up to 6,500 mm between table and cross-rail (range 3,500 - 6,500 mm)
W axis in three strokes: 2,800/3,800/4,800 mm (110.2/149.6/189.0 in)
100/113 kW (134/152 hp) drive power
Y travel of 5,200 - 10,200 mm (204.7 - 401.6 in) and X up to 25,000 mm
Carousel and grinding functions are part of the series description

Limitations

2,500 rpm maximum spindle speed
Axis feeds of 1 - 15,000 mm/min, the slowest in the FRUF table
Z ram stroke is still 1,500/2,000 mm (59.1/78.7 in), so deep reach relies on the W axis and head length
Building, crane and foundation requirements are not published

Best For

Very tall workpieces, up to the 6,500 mm clearance under the cross-rail Heavy roughing with large cutters at up to 113 kW Turning and milling of large rotating parts on a carousel-function rotary table Workpieces spanning up to 9,000 mm between the columns

Frequently Asked Questions

01 How tall a workpiece can the FRUF-C 300-800 machine?

The clearance between table and cross-rail is 3,500 - 6,500 mm (137.8 - 255.9 in), depending on configuration. The cross-rail moves 2,800/3,800/4,800 mm (110.2/149.6/189.0 in) on the W axis and the ram travels 1,500/2,000 mm (59.1/78.7 in) in Z.

02 What is the difference between the FRUF-C 300-800 and the FRUF-B 300-800?

Y travel and column clearance are the same. The FRUF-B 300-800 lists 60/71 kW (80/95 hp) at 4,000 rpm, a W axis of 2,500/3,000 mm (98.4/118.1 in) and 3,500 - 4,000 mm (137.8 - 157.5 in) under the cross-rail. The C has more power, less speed and far more height.

03 What spindle speed does the FRUF-C 300-800 reach?

2,500 rpm, with drive power of 100/113 kW (134/152 hp). The maker describes the spindle as high torque without printing a torque figure for the machine, so ask for the torque curve when comparing it with the B size.

04 How fast does the cross-rail of the FRUF-C 300-800 move?

The W feed range is 1 - 2,000 mm/min, with 1 - 4,000 mm/min in brackets. At those rates the cross-rail is positioned between operations. Cutting motion comes from X, Y and Z, each listed at 1 - 15,000 mm/min.

Other 5-Axis Machining Centers

Specs Available

TOS Kuřim FRUF-C 300-800

Key Specifications

How much does the TOS Kuřim FRUF-C 300-800 cost?