TOS Kuřim FRPF-A 200-400
Key Specifications
Max Spindle
x axis travel
y axis travel
z axis travel
w axis travel cross rail
feed range x
How much does the TOS Kuřim FRPF-A 200-400 cost?
Price estimate
We do not have a price for the TOS Kuřim FRPF-A 200-400 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The TOS Kuřim FRPF-A 200-400 combines a fixed gantry and a movable table with a cross-rail that travels vertically. That W axis is 2,000/2,500 mm (78.7/98.4 in), and it lifts the clearance between table and cross-rail to 2,400 - 3,150 mm (94.5 - 124.0 in).
Think of it as the tall version of the moving-table portal. The fixed-rail FRPN machines stop at 2,500 mm under the cross-rail or less. Here the rail goes up for a tall casing and comes down for a flat plate, and in both positions the ram works at a short extension. Z travel is 1,500/2,000 mm (59.1/78.7 in).
X is ordered in fine steps, 5,500 - 13,500 by 500 mm (216.5 - 531.5 by 19.7 in). Y travel is 3,000 - 5,000 mm (118.1 - 196.9 in), with 2,500 - 4,500 mm (98.4 - 177.2 in) between the columns and a table or carousel plate of 2,000 - 4,000 mm (78.7 - 157.5 in).
The A headstock is the 4,000/6,000 rpm one, with 30/37/45 kW (40/50/60 hp) of drive power. Table feed in X is 1 - 15,000 mm/min. Y and Z are 1 - 15,000 mm/min, with 1 - 20,000 mm/min in brackets, and the cross-rail positions at 1 - 2,000 mm/min, or 1 - 4,000 mm/min in brackets. The feature list names castings for the essential parts, linear roller or hydrostatic guideways and automatic exchange of spindle heads and tools.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 5,500 - 13,500 by 500 mm (216.5 - 531.5 by 19.7 in) |
| Y Axis Travel | 3,000 - 5,000 mm (118.1 - 196.9 in) |
| Z Axis Travel | 1,500/2,000 mm (59.1/78.7 in) |
| W Axis Travel Cross Rail | 2,000/2,500 mm (78.7/98.4 in) |
| Feed Range X | 1 - 15,000 mm/min |
| Feed Range Y | 1 - 15,000 mm/min (1 - 20,000 mm/min) |
| Feed Range Z | 1 - 15,000 mm/min (1 - 20,000 mm/min) |
| Feed Range W | 1 - 2,000 mm/min (1 - 4,000 mm/min) |
| Table Width Carousel Plate Diameter | 2,000 - 4,000 mm (78.7 - 157.5 in) |
| Clearance Between Columns | 2,500 - 4,500 mm (98.4 - 177.2 in) |
| Clearance Table to Cross Rail | 2,400 - 3,150 mm (94.5 - 124.0 in) |
| Max Spindle Speed | 4,000/6,000 rpm |
| Drive Power | 30/37/45 kW (40/50/60 hp) |
Specifications sourced from tos-kurim.cz — verified 2026-10-04
Strengths & Limitations
Strengths
- Movable cross-rail: W axis of 2,000/2,500 mm (78.7/98.4 in)
- 2,400 - 3,150 mm (94.5 - 124.0 in) between table and cross-rail
- X travel selectable in 500 mm steps from 5,500 mm to 13,500 mm
- 4,000/6,000 rpm spindle options
- Essential machine parts are castings
Limitations
- X feed is limited to 1 - 15,000 mm/min, half the bracketed rate of the FRPN-A 150-400 at 1 - 30,000 mm/min
- 30/37/45 kW (40/50/60 hp) is the smaller of the two FRPF drive rows
- Moving table: part weight is carried by the X axis, and no table load is published
- W moves at 1 - 2,000 mm/min (1 - 4,000 mm/min in brackets), a setting speed only
Best For
Frequently Asked Questions
01
The table moves in X, the headstock moves in Y along the cross-rail and in Z, and the cross-rail itself moves vertically in W. The gantry is fixed. The catalogue summarises this as fixed gantry, movable cross-rail, movable table.
02
X 5,500 - 13,500 by 500 mm (216.5 - 531.5 by 19.7 in), Y 3,000 - 5,000 mm (118.1 - 196.9 in), Z 1,500/2,000 mm (59.1/78.7 in) and W 2,000/2,500 mm (78.7/98.4 in).
03
The FRPF-B (C) 200-400 has the heavier headstock, 60/71/100 kW (80/95/134 hp) at 4,000/(2,500) rpm, a longer W axis of 2,500/3,000 mm (98.4/118.1 in) and 3,000 - 4,000 mm (118.1 - 157.5 in) under the cross-rail. The A machine is the faster-spindle, lower-power choice.
04
The table row is headed "table width, carousel plate diameter" and gives 2,000 - 4,000 mm (78.7 - 157.5 in), and the series is described as a multifunctional design with carousel and grinding function. Carousel speed and load are not published, so request them for turning work.
More from TOS Kuřim
Other 5-Axis Machining Centers
AWEA AG5-1620
Haas UMC-1000SS-P
Makino DA300
GF Machining MIKRON MILL S 200 U
Hurco VMX42UDi
