TOS Kuřim FRPN-B (C) 200-400

Q: How much does the TOS Kuřim FRPN-B (C) 200-400 cost?

The price estimate for the TOS Kuřim FRPN-B (C) 200-400 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/tos-kurim-frpn-b-c-200-400#price; the request is passed to TOS Kuřim or an authorised dealer.

Specs verified 2026-10-04 · tos-kurim.cz Updated 2026-10-04

Key Specifications

Max Spindle

4,000/(2,500) rpm

x axis travel

5,500 - 13,500 mm (216.5 - 531.5 in)

y axis travel

3,300 - 5,800 mm (129.9 - 228.3 in)

z axis travel

1,500/2,000 mm (59.1/78.7 in)

feed range x

1 - 15,000 mm/min

feed range y

1 - 15,000 mm/min (1 - 20,000 mm/min)

How much does the TOS Kuřim FRPN-B (C) 200-400 cost?

Price estimate

Uncertain

We do not have a price for the TOS Kuřim FRPN-B (C) 200-400 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

One column of the catalogue covers two headstock classes, which is why the TOS Kuřim FRPN-B (C) 200-400 carries both letters. It is a fixed-gantry, fixed-cross-rail machining centre with a movable table. The table travels 5,500 - 13,500 mm (216.5 - 531.5 in) in X.

The bracketed C shows up in two rows. Maximum spindle speed is printed as 4,000/(2,500) rpm and drive power as 60/71 (100) kW (80/95 (134) hp). Read together, the B version is the 4,000 rpm machine with 60 or 71 kW, and the figures in brackets belong to the C version. The catalogue leaves that pairing implicit, so have it confirmed in writing.

With either headstock this is a heavier machine than the A size, and it is slower. X feed is 1 - 15,000 mm/min. Y and Z are listed at 1 - 15,000 mm/min, with 1 - 20,000 mm/min in brackets. The table or carousel plate is 2,000 - 4,000 mm (78.7 - 157.5 in), Y travel 3,300 - 5,800 mm (129.9 - 228.3 in), and the columns are 3,050 - 4,550 mm (120.1 - 179.1 in) apart.

Height is modest. Clearance between table and cross-rail is 1,800 - 2,500 mm (70.9 - 98.4 in), and Z travel is 1,500/2,000 mm (59.1/78.7 in). A long, heavy, fairly low part is the natural load: an engine block line, a machine bed, a long die. For tall parts on a moving table the catalogue offers the FRPF, whose cross-rail travels.

Full Specifications

Parameter	Value
X Axis Travel	5,500 - 13,500 mm (216.5 - 531.5 in)
Y Axis Travel	3,300 - 5,800 mm (129.9 - 228.3 in)
Z Axis Travel	1,500/2,000 mm (59.1/78.7 in)
Feed Range X	1 - 15,000 mm/min
Feed Range Y	1 - 15,000 mm/min (1 - 20,000 mm/min)
Feed Range Z	1 - 15,000 mm/min (1 - 20,000 mm/min)
Table Width Carousel Plate Diameter	2,000 - 4,000 mm (78.7 - 157.5 in)
Clearance Between Columns	3,050 - 4,550 mm (120.1 - 179.1 in)
Clearance Table to Cross Rail	1,800 - 2,500 mm (70.9 - 98.4 in)
Max Spindle Speed	4,000/(2,500) rpm
Drive Power	60/71 (100) kW (80/95 (134) hp)

Specifications sourced from tos-kurim.cz — verified 2026-10-04

Strengths & Limitations

Strengths

Drive power of 60/71 (100) kW (80/95 (134) hp) on a fixed-gantry frame
Table travel of 5,500 - 13,500 mm (216.5 - 531.5 in)
Table or carousel plate of 2,000 - 4,000 mm (78.7 - 157.5 in)
Linear roller or hydrostatic guideways listed for the series

Limitations

Spindle speed is 4,000 rpm at most, and 2,500 rpm for the bracketed version
X feed is 1 - 15,000 mm/min with no bracketed higher range
Clearance under the cross-rail is 1,800 - 2,500 mm (70.9 - 98.4 in) and the rail is fixed
The catalogue does not state which figures belong to B and which to C

Best For

Long, heavy, low parts on up to 13,500 mm of table travel Heavy milling with a 60/71 kW drive, or 100 kW in the bracketed version Turning on a carousel plate of up to 4,000 mm combined with portal milling

Frequently Asked Questions

01 What does the (C) in FRPN-B (C) 200-400 mean?

The catalogue puts the B and C headstock classes in one column. Spindle speed is printed as 4,000/(2,500) rpm and drive power as 60/71 (100) kW (80/95 (134) hp), so the bracketed figures appear to be the C version. That reading is an inference from the layout; the catalogue does not spell it out.

02 How long is the X axis of the FRPN-B (C) 200-400?

X travel is 5,500 - 13,500 mm (216.5 - 531.5 in), and it is the table that moves. A travelling table needs clear floor on both sides of the fixed gantry, so plan the hall length around the X travel chosen.

03 How does the FRPN-B (C) 200-400 differ from the FRPN-A 150-400?

The FRPN-A 150-400 is shorter and faster: X of 3,000/4,000/5,000 mm (118.1/157.5/196.9 in), 4,000/6,000 rpm and 30/37/45 kW (40/50/60 hp), with 1 - 30,000 mm/min in brackets on its feed rows. The B (C) machine has longer travel and more power at lower speed.

04 What is the feed range of the FRPN-B (C) 200-400?

X is listed at 1 - 15,000 mm/min. Y and Z are listed at 1 - 15,000 mm/min, with 1 - 20,000 mm/min in brackets. The series feature list mentions rapid feed up to 30 m/min, a figure that matches the bracketed range of the A size and not any row of this column.

Other 5-Axis Machining Centers

TOS Kuřim FRPN-B (C) 200-400

Key Specifications

How much does the TOS Kuřim FRPN-B (C) 200-400 cost?