TOS Kuřim FRPF-B (C) 200-400
Key Specifications
Max Spindle
x axis travel
y axis travel
z axis travel
w axis travel cross rail
feed range x
How much does the TOS Kuřim FRPF-B (C) 200-400 cost?
Price estimate
We do not have a price for the TOS Kuřim FRPF-B (C) 200-400 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The TOS Kuřim FRPF-B (C) 200-400 is the heavy headstock on the fixed-gantry frame with a travelling cross-rail. Drive power is listed as 60/71/100 kW (80/95/134 hp), and the cross-rail lifts to give 3,000 - 4,000 mm (118.1 - 157.5 in) between itself and the table.
Two things separate it from the A size, power and height. The W axis is 2,500/3,000 mm (98.4/118.1 in). Y travel is a little wider at 3,700 - 5,700 mm (145.7 - 224.4 in). Spindle speed drops: the row reads 4,000/(2,500) rpm, the bracketed figure belonging to the C class named in the model heading.
The remaining geometry is shared across the FRPF table. X is 5,500 - 13,500 by 500 mm (216.5 - 531.5 by 19.7 in) and is done by the table. Z is 1,500/2,000 mm (59.1/78.7 in). The table or carousel plate is 2,000 - 4,000 mm (78.7 - 157.5 in) and the columns stand 2,500 - 4,500 mm (98.4 - 177.2 in) apart. Note the proportion. With up to 4,000 mm of height over a column clearance of at most 4,500 mm, the opening is nearly as tall as it is wide.
A tall heavy part on a moving table puts real demands on the X axis. The feed there is 1 - 15,000 mm/min. The guideways are linear roller or hydrostatic, and on this model the choice should follow the heaviest part you plan to load. The catalogue gives no table load for the FRPF. For rotary tables in general its accessories page quotes 15,000 to 100,000 kg.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 5,500 - 13,500 by 500 mm (216.5 - 531.5 by 19.7 in) |
| Y Axis Travel | 3,700 - 5,700 mm (145.7 - 224.4 in) |
| Z Axis Travel | 1,500/2,000 mm (59.1/78.7 in) |
| W Axis Travel Cross Rail | 2,500/3,000 mm (98.4/118.1 in) |
| Feed Range X | 1 - 15,000 mm/min |
| Feed Range Y | 1 - 15,000 mm/min (1 - 20,000 mm/min) |
| Feed Range Z | 1 - 15,000 mm/min (1 - 20,000 mm/min) |
| Feed Range W | 1 - 2,000 mm/min (1 - 4,000 mm/min) |
| Table Width Carousel Plate Diameter | 2,000 - 4,000 mm (78.7 - 157.5 in) |
| Clearance Between Columns | 2,500 - 4,500 mm (98.4 - 177.2 in) |
| Clearance Table to Cross Rail | 3,000 - 4,000 mm (118.1 - 157.5 in) |
| Max Spindle Speed | 4,000/(2,500) rpm |
| Drive Power | 60/71/100 kW (80/95/134 hp) |
Specifications sourced from tos-kurim.cz — verified 2026-10-04
Strengths & Limitations
Strengths
- Drive power of 60/71/100 kW (80/95/134 hp)
- 3,000 - 4,000 mm (118.1 - 157.5 in) between table and cross-rail
- W axis of 2,500/3,000 mm (98.4/118.1 in)
- Y travel of 3,700 - 5,700 mm (145.7 - 224.4 in) on a fixed gantry
- Linear roller or hydrostatic guideways in the linear axes
Limitations
- Spindle speed of 4,000/(2,500) rpm, with no 6,000 rpm option
- Column clearance stays at 2,500 - 4,500 mm (98.4 - 177.2 in), the same as the lighter A size
- Table load is not given, which matters on a moving-table machine built for heavy parts
- Y and Z feed of 1 - 15,000 mm/min, with 1 - 20,000 mm/min in brackets
Best For
Frequently Asked Questions
01
The drive power row reads 60/71/100 kW (80/95/134 hp). The spindle speed row reads 4,000/(2,500) rpm. The catalogue does not map each power to a speed; on the fixed-rail FRPN-B (C) 200-400 the 100 kW figure is the one in brackets, which suggests it goes with the C class and 2,500 rpm.
02
The clearance between table and cross-rail is 3,000 - 4,000 mm (118.1 - 157.5 in). The cross-rail travels 2,500/3,000 mm (98.4/118.1 in) in W, and the ram adds 1,500/2,000 mm (59.1/78.7 in) of Z. The width between columns is 2,500 - 4,500 mm (98.4 - 177.2 in).
03
The table. The FRPF is described as fixed gantry, movable cross-rail, movable table, and X travel is 5,500 - 13,500 by 500 mm (216.5 - 531.5 by 19.7 in). The hall has to allow for the table running out on both sides of the gantry.
04
When the part is very long, very wide or too heavy to move. The FRUF-B 300-800 keeps the part still, with a similar 60/71 kW (80/95 hp) drive, X of 5,000 - 25,000 by 1,000 mm (196.9 - 984.3 by 39.4 in) and Y of 5,200 - 10,200 mm (204.7 - 401.6 in).
More from TOS Kuřim
Other 5-Axis Machining Centers
AWEA AG5-3220
Okuma GENOS M560-V 5AX
Haas UMC-1250SS-50
GF Machining MIKRON MILL S 400 U
SW BA space3-22
