Okuma GENOS M560-V 5AX

Est. $250,000 - $330,000 Specs verified 2026-10-03 · okuma.com Updated 2026-10-03

Key Specifications

X Travel

1,050 mm (41.3 in)

Y Travel

560 mm (22.0 in)

Z Travel

460 mm (18.1 in)

Spindle Taper

CAT 40 Big Plus

Tool Capacity

Table Size

500 mm (19.69 in)

How much does the Okuma GENOS M560-V 5AX cost?

Estimated price range

Est.$250,000 - $330,000

Our best estimate for a 5-axis machining center in this class — not a quote from Okuma. Configuration moves it a long way.

Overview

With 1,050 mm (41.3 in) of X travel, 560 mm (22.0 in) of Y and a 500 mm (19.69 in) table, the Okuma GENOS M560V-5AX is a mid-size 5-axis machining center. Z travel is 460 mm (18.1 in). It runs a 15,000 rpm CAT 40 Big Plus spindle, carries 60 tools and is controlled by the Okuma OSP-P500.

Against the GENOS M460V-5AX, which has 762 mm (30.0 in) of X, 460 mm (18.1 in) of Y, a 400 mm (15.75 in) table and 48 tools, the gain is in plan area and tool count. Height is not part of it, because both machines list 460 mm of Z. Moving up does not make a taller part possible. It makes room for a wider one, or for a fixture holding several small ones.

Spindle power is listed as 22/18.5 kW (30/25 hp), the same pair of figures given for the GENOS M460V-5AX, so the larger envelope is not matched by a heavier spindle. At 15,000 rpm the spindle suits aluminium and finishing passes with small cutters in harder material. Shops planning sustained roughing in steel should ask Okuma for the torque curve, which the headline rows leave out.

Rapid traverse is 40 m/min (1,575 ipm) on X and Y and 32 m/min (1,260 ipm) on Z, and the rotary axes are listed at 14,400 deg/min for A and 18,000 deg/min for C. Over 1,050 mm of X, the 40 m/min rate keeps non-cutting moves short when work is spread across the table or the tool has to clear a tilted fixture. Table load and maximum workpiece dimensions are also absent from the rows Okuma publishes, so request them before quoting a job near the limits.

Full Specifications

Parameter	Value
X-Axis Travel	1,050 mm (41.3 in)
Y-Axis Travel	560 mm (22.0 in)
Z-Axis Travel	460 mm (18.1 in)
Spindle Taper	CAT 40 Big Plus
Tool Capacity	60
Table Size	500 mm (19.69 in)
Rapid Traverse Xy	40 m/min (1,575 ipm)
Rapid Traverse Z	32 m/min (1,260 ipm)
CNC Control	Okuma OSP-P500
Max Machining Volume	X: 1,050, Y: 560, Z: 460 mm (X: 41.34, Y: 22.05, Z: 18.11 in)
Rapid Traverse Rate	X-Y: 40 Z: 32 m/min (X-Y: 1,575, Z: 1,260 ipm)
Spindle Speed	15,000 rpm
Spindle Motor Power	22/18.5 kW (30/25 hp)
Rapid Traverse A C	A: 14,400 C: 18,000 deg/min

Specifications sourced from okuma.com — verified 2026-10-03

Strengths & Limitations

Strengths

1,050 mm (41.3 in) of X and 560 mm (22.0 in) of Y, against 762 mm (30.0 in) and 460 mm (18.1 in) on the GENOS M460V-5AX
60-tool magazine, against 48 tools on the GENOS M460V-5AX
500 mm (19.69 in) table takes larger fixtures than the 400 mm (15.75 in) table of the GENOS M460V-5AX
Okuma OSP-P500 control is named in the specification
15,000 rpm CAT 40 Big Plus spindle rated 22/18.5 kW (30/25 hp)

Limitations

Z travel stays at 460 mm (18.1 in), the same as the smaller GENOS M460V-5AX, so part height plus tool length is no more generous
Spindle power is 22/18.5 kW (30/25 hp), unchanged from the GENOS M460V-5AX despite the larger work area
Z rapid is 32 m/min (1,260 ipm), slower than the 40 m/min (1,575 ipm) of X and Y
Neither a table load nor a maximum workpiece size appears in Okuma's headline rows; both need confirming for heavy parts

Best For

Wider 5-axis parts that need up to 1,050 mm (41.3 in) of X Multi-part fixtures on a 500 mm (19.69 in) table Long unattended runs that draw on a 60-tool magazine Aluminium and finishing work at 15,000 rpm

Frequently Asked Questions

01 What control does the GENOS M560V-5AX use?

The OSP-P500, which is Okuma's own control. The same page gives a 15,000 rpm CAT 40 Big Plus spindle, 60 tools and travels of 1,050 mm (41.3 in), 560 mm (22.0 in) and 460 mm (18.1 in) for X, Y and Z.

02 How large a part fits on the GENOS M560V-5AX?

The table is 500 mm (19.69 in) and the maximum machining volume is listed as X: 1,050, Y: 560, Z: 460 mm (X: 41.34, Y: 22.05, Z: 18.11 in). Okuma's headline rows do not state a maximum workpiece diameter, height or weight, so treat the table size and Z travel as the working limits until Okuma confirms more.

03 Is the GENOS M560V-5AX more powerful than the GENOS M460V-5AX?

No. Both the GENOS M560V-5AX and the GENOS M460V-5AX are listed with 22/18.5 kW (30/25 hp) and a CAT 40 Big Plus spindle. Coming from the GENOS M460V-5AX, X grows from 762 mm (30.0 in) to 1,050 mm (41.3 in), Y from 460 mm (18.1 in) to 560 mm (22.0 in) and the magazine from 48 to 60 tools.

04 What are the rapid traverse rates?

X and Y rapid at 40 m/min (1,575 ipm) and Z at 32 m/min (1,260 ipm). For the rotary axes Okuma gives 14,400 deg/min on A and 18,000 deg/min on C, which is what governs repositioning time between faces on indexed work.