Onsrud 6100M
Key Specifications
Max Spindle
Tool Capacity
Spindle Power
table size x
table size y
machine length
How much does the Onsrud 6100M cost?
Price estimate
We do not have a price for the Onsrud 6100M that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Onsrud 6100M is the longest table Onsrud lists in the M-Series: 240 in (6,100 mm) of X on the 83 in (2,109 mm) wide bed, served by a 12 hp (8.9 kW), 24,000 rpm spindle. A twenty-foot sheet lies flat on it.
Six vacuum zones are standard, the most in the series. The machine is 330 in (8,382 mm) long and 140 in (3,556 mm) wide, and 91 in (2,312 mm) high.
A bed this long changes how the machine gets used. Two ten-foot sheets fit end to end, and long extrusion-like parts or boat and trailer panels can be cut in one piece. The moving gantry travels the full length, so cycle time on a full bed is dominated by travel, and a second or third spindle, which Onsrud lists as an upgrade, shortens it by cutting in parallel.
The limits are the same as on the shortest M-Series table. Z-stroke is 11 in (279 mm), tool capacity is 12 as standard, and the series shows one spindle rating. Onsrud positions the M-Series as its compact and economical line, so a buyer who wants this table length with a heavier gantry or a taller Z should compare the maker's other moving-gantry series.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size X | 240 in (6,100 mm) |
| Table Size Y | 83 in (2,109 mm) |
| Machine Length | 330 in (8,382 mm) |
| Machine Width | 140 in (3,556 mm) |
| Machine Height | 91 in (2,312 mm) |
| Vacuum Zones Standard | 6 |
| Spindle Motor Power | 12 hp (8.9 kW) |
| Max Spindle Speed | 24,000 rpm |
| Tool Capacity | 12; 10-position standard with a 4' x 8' table size (larger capacity tool changers optional) |
| Z Stroke | 11 in (279 mm) |
| Spindles Optional | Up to 3 |
| Tool Changer Optional | 10-Pos / Hide-A-Way |
Specifications sourced from cronsrud.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 240 in (6,100 mm) of table X, the longest in the M-Series
- 6 vacuum zones as standard
- Wide 83 in (2,109 mm) bed on the same 140 in (3,556 mm) frame as the 3100M
- Up to 3 spindles can be specified to cut in parallel along the bed
Limitations
- Machine length of 330 in (8,382 mm)
- Still a 12 hp (8.9 kW) spindle and an 11 in (279 mm) Z-stroke
- One gantry covers the whole bed, so full-length jobs are travel-limited
Best For
Frequently Asked Questions
01
The table is 240 in (6,100 mm) long in X and 83 in (2,109 mm) wide in Y. It has 6 vacuum zones as standard, which lets shorter sheets be held on part of the bed.
02
The machine is 330 in (8,382 mm) long, 140 in (3,556 mm) wide and 91 in (2,312 mm) high. The 5100M is shorter at 290 in (7,366 mm), with the same width and height.
03
No. Every M-Series table is listed with the same 12 hp (8.9 kW), 24,000 rpm spindle. Output is raised by adding spindles, up to 3, not by a larger motor.
04
11 in (279 mm), the same as the rest of the M-Series. The series page lists no taller Z option, so thick parts and tall fixtures need one of the maker's other lines.
