Onsrud 468GW12
Key Specifications
Max Spindle
Tool Capacity
Spindle Power
table size x
table size y
machine length
How much does the Onsrud 468GW12 cost?
Price estimate
We do not have a price for the Onsrud 468GW12 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Onsrud lists the 468GW12 in one place only: the 18 in (457 mm) Z-stroke block of its 3-axis G-Series table. There it is the largest machine, with a table 468 in (11,888 mm) long and 144 in (3,658 mm) wide.
Think of it as the middle setting for a very large table. The 480GW12, its near twin, comes with an 11 in stroke or with 28 in and 40 in strokes, but not with 18 in. A buyer who wants more than sheet clearance without the height of the tallest frames ends up here. The 468GW12 is 140 in (3,556 mm) high and 586 in (14,885 mm) long. Its width, 224 in (5,690 mm), is the same as the 480GW12.
The vacuum table has 10 zones as standard. Over thirty-nine feet that is roughly one zone every four feet, each of them spanning the full twelve-foot width unless custom zones are specified. Small parts cut from wide sheet will test hold-down, so discuss the zone plan and the pump capacity with the maker.
For the rest, the model follows the series: a moving gantry on one-piece steel columns with a helical rack and dual drives, an 18 hp (13.4 kW) spindle reaching 24,000 rpm, and room for 12 tools. Onsrud offers a FANUC controller as standard or its own touchscreen interface.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size X | 468 in (11,888 mm) |
| Table Size Y | 144 in (3,658 mm) |
| Machine Length | 586 in (14,885 mm) |
| Machine Width | 224 in (5,690 mm) |
| Machine Height | 140 in (3,556 mm) |
| Vacuum Zones Standard | 10 |
| Spindle Motor Power | 18 hp (13.4 kW) |
| Max Spindle Speed | 24,000 rpm |
| Tool Capacity | 12 (larger capacity tool changers optional) |
| Z Stroke | 18 in (457 mm) |
| Spindle Power Optional | 24 hp (17.9 kW) |
| Spindles Optional | Up to 4 |
| Dual Gantry | Optional |
| Second Tool Changer | Optional |
Specifications sourced from cronsrud.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 468 in (11,888 mm) by 144 in (3,658 mm) table with an 18 in (457 mm) Z-stroke
- Largest machine in the 18 in block of Onsrud's table
- 10 vacuum zones as standard
- Up to 4 spindles and a dual gantry offered
Limitations
- Frame of 586 in (14,885 mm) by 224 in (5,690 mm)
- Zones span a twelve-foot width unless custom zones are ordered
- One Z-stroke only under this code
Best For
Frequently Asked Questions
01
Width. The 468GW10 has a table Y of 120 in (3,048 mm) and a 200 in (5,080 mm) frame; the 468GW12 has 144 in (3,658 mm) and 224 in (5,690 mm). Table X, machine length, height, Z-stroke and the 10 vacuum zones are the same.
02
140 in (3,556 mm). That is the figure for the 18 in Z-stroke, the only stroke listed under this code. The machine is 586 in (14,885 mm) long and 224 in (5,690 mm) wide.
03
Onsrud lists 10 zones as standard on the 468 in (11,888 mm) by 144 in (3,658 mm) table. Custom vacuum zones are offered, which let the size and location of the vacuum areas be tailored and sections of the table be shut off.
04
No. It belongs to the 3-axis G-Series. Onsrud sells a separate G-Series 5-Axis line, and the 18 in block of that table lists a 480GW12 5-Axis with a table of 480 in (12,192 mm) by 144 in (3,658 mm).
