Niigata HN130D
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Spindle Power
x axis travel
y axis travel
How much does the Niigata HN130D cost?
Price estimate
We do not have a price for the Niigata HN130D that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Niigata HN130D is the largest plain HN series horizontal machining center. Its pallet measures 1,320 mm × 1,320 mm and carries 8,000 kg (17,637 lb), and the machine accepts a workpiece of φ3,200 mm × 3,000 mm. X travel is 3,050 mm (120.1 in), Y is 2,200 mm (86.6 in) and Z is 1,420 mm (55.9 in).
Those dimensions put it in territory usually covered by floor-type boring mills, but the HN130D keeps the pallet, the tool changer and the enclosed layout of a machining center. The practical benefit is setup: a part of eight tonnes can be fixtured off the machine and indexed for multi-face work. With the NC table, the pallet rating can be raised to 10,000 kg (22,046 lb); Niigata notes that this option is for the NC table only.
Size costs speed. Rapid traverse is 18 m/min in X and 12 m/min in Y and Z, well under the 30 m/min of the HN100D-II. On parts of this scale the time is spent in the cut, so the spindle matters more: 1,948 N·m (1,437 lb-ft) at up to 6,000 min-1 from an AC 30 / 22 kW motor, with BT50 tooling. A 15,000 min-1 direct-drive spindle rated 350 N·m is the option.
The structure is the series standard scaled up. Niigata lists a thick base, a monster column on a widened Z-axis guide surface, and square slides that are hardened, ground and scraped by hand. Tool storage runs from 62 tools to 255 in an expandable chain, or 230 in a matrix magazine.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 3,050 mm (120.1 in) |
| Y Axis Travel | 2,200 mm (86.6 in) |
| Z Axis Travel | 1,420 mm (55.9 in) |
| Pallet Size | 1,320 mm × 1,320 mm (52.0 in × 52.0 in) |
| Table Indexing Angle | 1°; option 0.001° |
| Max Table Load | 8,000 kg (17,637 lb); option 10,000 kg (22,046 lb) (NC table only) |
| Max Spindle Speed | 6,000 min-1; option 15,000 min-1 |
| Spindle Torque | 1,948 N·m (1,437 lb-ft) |
| Spindle Taper | BT50 |
| Rapid Traverse Xyz | 18 / 12 / 12 m/min (709 / 472 / 472 ipm) |
| Tool Capacity | 62; options 88 / 128 / 175 / 255 (expandable chain type), 126 / 178 / 230 (matrix type) |
| Max Workpiece Size | φ3,200 mm × 3,000 mm (126.0 in × 118.1 in) |
| Spindle Motor Power | AC 30 / 22 kW (40.2 / 29.5 hp) |
| Spindle Option High Speed | 15,000 min-1, 350 N·m (258 lb-ft), AC 35 / 30 kW (46.9 / 40.2 hp) |
Specifications sourced from n-mtec.com — verified 2026-10-05
Strengths & Limitations
Strengths
- Workpiece up to φ3,200 mm × 3,000 mm in a pallet-changing machining center
- 8,000 kg (17,637 lb) pallet load, 10,000 kg (22,046 lb) optional with the NC table
- 3,050 mm of X travel and 2,200 mm of Y
- 1,948 N·m (1,437 lb-ft) BT50 spindle as standard
- Tool magazine expandable to 255 tools
Limitations
- Rapids of 18 / 12 / 12 m/min are the slowest in the HN series
- Z travel of 1,420 mm is short relative to a 3,200 mm swing, so deep internal features need long tools
- The 10,000 kg rating is restricted to the NC table
- Motor output of AC 30 / 22 kW is the same as on the much smaller HN80E
Best For
Frequently Asked Questions
01
Up to φ3,200 mm in swing diameter and 3,000 mm tall, on a 1,320 mm × 1,320 mm pallet. The standard load is 8,000 kg (17,637 lb), and a 10,000 kg (22,046 lb) rating is optional with the NC table only.
02
18 m/min on X and 12 m/min on Y and Z. These are lower than on the smaller HN models because of the mass being moved: the column travels 1,420 mm in Z and carries a spindle head with 2,200 mm of vertical travel.
03
The standard spindle is the high-rigidity BT50 unit of the HN series: 6,000 min-1, 1,948 N·m and an AC 30 / 22 kW motor. An optional high-speed spindle with a direct-drive motor is listed at 15,000 min-1, 350 N·m and AC 35 / 30 kW.
04
The travels, load and workpiece size are the same. The HN1600-S has a longer 1,600 mm × 1,320 mm pallet, roller guides on X and Z and 30 m/min rapids, with a 1,200 N·m spindle as standard. The HN130D uses sliding guides throughout and has the 1,948 N·m spindle as standard.
More from Niigata
Other Horizontal Machining Centers (HMC)
SW BA W08-21
Heckert HEC500
Matsuura H.Plus-630
Haas EC-1600 Horizontal Machining Center
Anger Machining Meteor 1500 (A100)
