Yamazaki Mazak CNC Laser Cutting Machines

Mazak Optiplex 3015 Fiber II Laser

Est. $400,000 – $750,000 Possible older model Updated 2026-10-02

This model was not found in Yamazaki Mazak's current lineup when we checked on 2026-10-02 (lineup page). It may be a superseded or older model; the specifications below are as we last recorded them.

Key Specifications

Accuracy

±0.03 mm

cutting area

3,000 x 1,500 mm

laser power

2,000 W – 9,000 W (fiber, configurable)

laser type

Fiber laser

max cutting thickness steel

25 mm (mild steel, 9 kW); 20 mm (stainless); 15 mm (aluminum)

positioning speed

120 m/min (linear motor drive, X and Y)

How much does the Mazak Optiplex 3015 Fiber II Laser cost?

Estimated price range

Est.$400,000 – $750,000

Our best estimate for a cnc laser cutting machine in this class — not a quote from Yamazaki Mazak. Configuration moves it a long way.

Overview

The Mazak Optiplex 3015 Fiber II Laser is listed as a fiber laser cutting machine with a 3,000 x 1,500 mm cutting area and a configurable source from 2,000 W to 9,000 W. That span is the main thing to establish on any one machine, because it decides what the machine can cut. The model does not appear in Mazak's current lineup and may be an older one, and the short table here has not been checked against a Mazak source.

At the top of the range the listed limits are 25 mm in mild steel at 9 kW, with 20 mm given for stainless and 15 mm for aluminum. A lower-powered example will fall short of those, and the table does not say by how much. X and Y are listed with linear motor drive and a positioning speed of 120 m/min, and positioning accuracy is listed at ±0.03 mm.

Machine weight is given as approximately 11,500 kg. Sheet weight, pallet arrangement and electrical supply are not in the table, so take them from the documentation of the machine in question.

Full Specifications

Parameter	Value
Cutting Area	3,000 x 1,500 mm
Laser Power	2,000 W – 9,000 W (fiber, configurable)
Laser Type	Fiber laser
Max Cutting Thickness Steel	25 mm (mild steel, 9 kW); 20 mm (stainless); 15 mm (aluminum)
Positioning Speed	120 m/min (linear motor drive, X and Y)
Positioning Accuracy	±0.03 mm
Control System	Mazak Mazatrol Fabric with IOS (Intelligent Optical Sensor)
Machine Weight	Approx. 11,500 kg

Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.

Strengths & Limitations

Strengths

Listed source range of 2,000 W to 9,000 W, with 25 mm mild steel capacity at 9 kW
Linear motor drive on X and Y with a listed positioning speed of 120 m/min
Listed positioning accuracy of ±0.03 mm

Limitations

Does not appear in Mazak's current lineup; the listed figures have not been checked against a Mazak source
The 25 mm mild steel limit applies at 9 kW, and the table gives no limits for lower-powered machines

Best For

Sheet and plate up to the listed 3,000 x 1,500 mm cutting area Mild steel to 25 mm on a 9 kW machine, as listed Stainless to the listed 20 mm and aluminum to the listed 15 mm

Frequently Asked Questions

01 What laser power does the Optiplex 3015 Fiber II Laser have?

The table lists a configurable fiber source from 2,000 W to 9,000 W. The fitted power differs from machine to machine, so read it from the nameplate before judging what a particular example can cut.

02 How thick can the Optiplex 3015 Fiber II Laser cut?

The listed maximums are 25 mm in mild steel at 9 kW, 20 mm in stainless and 15 mm in aluminum. The table gives no figures for lower power levels, and a machine with a smaller source will cut less.

03 Is the Optiplex 3015 Fiber II Laser still listed by Mazak?

It does not appear in Mazak's current lineup and may be an older model. The figures here are listed values that have not been checked against a Mazak source, which matters most to someone looking at a used machine.