Johnford VMC-2000S
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
y axis travel
How much does the Johnford VMC-2000S cost?
Price estimate
We do not have a price for the Johnford VMC-2000S that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Johnford VMC-2000S offers 2,050 mm (80.7 in) of X travel on a moving-table vertical machining center, with a 2,200 x 1,000 mm (86.6 x 39.4 in) table and a BT-40 / CAT-40 geared spindle. Y travel is 1,100 mm (43.3 in) and Z is 800 mm (31.5 in).
At this length Johnford changes the axis drives. X and Y both use Φ63 ball screws, and the rated speeds come down: rapid traverse is 15 / 15 / 12 m/min (591 / 591 / 472 ipm) and cutting feed 1~8,000 mm/min, where the VMC-1600S is listed at 18 / 18 / 12 m/min and 1~12,000 mm/min. A two metre screw has to be run more slowly, and the feed limit matters for anyone planning light, fast finishing passes in aluminium.
The table carries 4,800 kg (10,560 lb), only a little more than the 4,600 kg (10,120 lb) of the VMC-1600S, so the added length is for longer parts rather than much heavier ones. Machine weight is 20,000 kg (44,000 lb). Because the table moves in X, the machine is 5,500 mm (216.5 in) long, and the working area in front of it has to stay clear over that whole length.
Spindle data is common to the 40-taper Large VMC models: 80-8,000 rpm, automatic Hi-Lo gearbox, 7.5 / 11 kW (10.1 / 14.8 hp), 70 mm (2.8 in) spindle diameter, and a 24-tool armless changer with arm type 24 or 32 tool changers as options. Long weldments, rails, press beds and plate work are the natural fit.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size | 2,200 x 1,000 mm (86.6 x 39.4 in) |
| X Axis Travel | 2,050 mm (80.7 in) |
| Y Axis Travel | 1,100 mm (43.3 in) |
| Z Axis Travel | 800 mm (31.5 in) |
| Distance Spindle Nose to Table | 150~950 mm (5.9~37.4 in) |
| Distance Spindle Center to Column | 1,150 mm (45.3 in) |
| Spindle Taper | BT-40 / CAT-40 |
| Spindle Diameter | 70 mm (2.8 in) |
| Spindle Speed | Auto Hi-Lo Gear; 80-8,000 rpm |
| Spindle Motor Power | 7.5 / 11 kW (10.1 / 14.8 hp) |
| Rapid Traverse Xyz | 15 / 15 / 12 m/min (591 / 591 / 472 ipm) |
| Cutting Feed Rate | 1~8,000 mm/min (0.04~315 ipm) |
| Tool Capacity | Armless 24; Arm type 24/32 (Opt.) |
| Max Tool Diameter Adjacent Pockets | 75 mm (3 in) |
| Max Tool Diameter (full magazine) | 100 mm (3.9 in) |
| Max Tool Length | 320 mm (12.6 in) |
| Max Tool Weight | 10 kg (22 lb) |
| Max Table Load | 4,800 kg (10,560 lb) |
| Machine Weight | 20,000 kg (44,000 lb) |
| Machine Dimensions | 5,500 x 4,580 x 3,695 mm (216.5 x 180.3 x 145.5 in) |
| Ball Screw Diameter Xyz | Φ63,Φ63,Φ50 |
Specifications sourced from johnford.com.tw — verified 2026-10-04
Strengths & Limitations
Strengths
- 2,050 mm (80.7 in) X travel with 1,100 mm (43.3 in) of Y
- Φ63 ball screws on both X and Y
- 4,800 kg (10,560 lb) table load on a 2,200 x 1,000 mm (86.6 x 39.4 in) table
- 20,000 kg (44,000 lb) machine weight
- 800 mm (31.5 in) of Z with up to 950 mm (37.4 in) under the spindle nose
Limitations
- Cutting feed is limited to 8,000 mm/min (315 ipm)
- X and Y rapids of 15 m/min (591 ipm) are slower than on the VMC-1600S
- 7.5 / 11 kW (10.1 / 14.8 hp) spindle on a two metre machine
- 5,500 x 4,580 mm (216.5 x 180.3 in) footprint
Best For
Frequently Asked Questions
01
2,050 mm (80.7 in) in X, 1,100 mm (43.3 in) in Y and 800 mm (31.5 in) in Z. The table measures 2,200 x 1,000 mm (86.6 x 39.4 in) and carries 4,800 kg (10,560 lb).
02
Johnford's table gives the VMC-2000S rapids of 15 / 15 / 12 m/min (591 / 591 / 472 ipm) and a cutting feed of 1~8,000 mm/min, against 18 / 18 / 12 m/min and 1~12,000 mm/min on the VMC-1600S. The table does not state a reason; the longer X travel and the Φ63 X and Y ball screws are the visible differences.
03
Yes. The VMC-2000SHD has a BT-50 / CAT-50 spindle at 10-4,500 rpm with 15 / 18.5 kW (20.1 / 24.8 hp) and a 20-tool armless changer, on identical travels, table and weight.
04
The listed dimensions are 5,500 x 4,580 x 3,695 mm (216.5 x 180.3 x 145.5 in). The machine weighs 20,000 kg (44,000 lb), and foundation bolts and levelling pads are standard accessories.
More from Johnford
Other Vertical Machining Centers (VMC)
Vision Wide NFT-2223
Vision Wide XMF-57
Huron RDX 30
OPS Ingersoll HIGH SPEED EAGLE V9
DN Solutions DNM 5700 4TH
