Han's Laser HBS3232
Key Specifications
press force
max bending width
closed height
distance between uprights
throat depth
motor power
How much does the Han's Laser HBS3232 cost?
Price estimate
We do not have a price for the Han's Laser HBS3232 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Han's Laser HBS3232 is the shorter of the two 3,200 kN press brakes that top the HBS series table, and it is the one model with a bending width of its own: 3,200 mm (126.0 in), where the HBS2631 and the other three-metre machines are listed at 3,100 mm (122.0 in).
At this force the machine is built differently from the rest of the range. The motor is 22 kW (29.5 hp). Closed height reaches 605 mm (23.8 in), the tallest in the table, for the large dies that thick plate requires. And the machine itself stands 3,286 mm high, within overall dimensions of 3,768 × 2,000 × 3,286 mm (148.3 × 78.7 × 129.4 in). Check that height against the roof and the crane hook before anything else.
Speeds are the lowest in the series, as expected. The ram comes down at 100 mm/s, bends at 9 mm/s and returns at 130 mm/s. Heavy plate is bent slowly in any case, for the sake of the operator holding it, so the working speed is less of a handicap than it looks on paper.
One dimension has not grown with the force. The uprights are still 2,700 mm (106.3 in) apart and the throat is still 410 mm (16.1 in) deep, exactly as on the 1,100 kN HBS1131. Deep flanges on wide plate have to be planned around that.
The oil tank holds 200 L. Han's Laser lists a reinforced frame and ram, mechanical compensation adjustable in both directions, and an IFT CNC system.
Full Specifications
| Parameter | Value |
|---|---|
| Press Force | 3,200 kN |
| Max Bending Width | 3,200 mm (126.0 in) |
| Closed Height | 605 mm (23.8 in) |
| Distance Between Uprights | 2,700 mm (106.3 in) |
| Throat Depth | 410 mm (16.1 in) |
| Motor Power | 22 kW (29.5 hp) |
| Oil Tank Capacity | 200 L |
| Fast Down Speed | 100 mm/s |
| Working Speed | 9 mm/s |
| Return Speed | 130 mm/s |
| Machine Dimensions | 3,768 × 2,000 × 3,286 mm (148.3 × 78.7 × 129.4 in) |
Specifications sourced from hanslaser.net — verified 2026-10-05
Strengths & Limitations
Strengths
- 3,200 kN, the highest press force in the HBS table
- Closed height of 605 mm (23.8 in) for large tooling
- Bending width of 3,200 mm (126.0 in)
- 22 kW (29.5 hp) motor, the largest in the series
Limitations
- Working speed of 9 mm/s and fast down speed of 100 mm/s are the slowest in the series
- Overall height of 3,286 mm may not fit low buildings
- Throat depth remains 410 mm (16.1 in) and the uprights 2,700 mm (106.3 in) apart
Best For
Frequently Asked Questions
01
Press force is 3,200 kN over a maximum bending width of 3,200 mm (126.0 in). The motor is rated at 22 kW (29.5 hp) and the oil tank capacity is 200 L.
02
Fast down speed is 100 mm/s, working speed 9 mm/s and return speed 130 mm/s. The HBS2631, one step down in force, is listed at 120 mm/s, 11 mm/s and 130 mm/s.
03
The closed height is 605 mm (23.8 in). The machine's overall dimensions are 3,768 × 2,000 × 3,286 mm (148.3 × 78.7 × 129.4 in), so it needs well over three metres of clear height before lifting gear is counted.
04
Yes. The HBS3241 has the same 3,200 kN with a 4,100 mm (161.4 in) bending width, 3,700 mm (145.7 in) between uprights and a return speed of 120 mm/s.
