Cincinnati XFORMe 230XFe10
Key Specifications
overall die surface
closed height
stroke length
open height
throat
approach speed
How much does the Cincinnati XFORMe 230XFe10 cost?
Price estimate
We do not have a price for the Cincinnati XFORMe 230XFe10 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Cincinnati XFORMe 230XFe10 is a heavy hybrid press brake with a 12 ft (3,658 mm) overall die surface. It is the size at which the hybrid table first shows a lower forming speed: 55 ipm (1,397 mm/min).
That is still well ahead of the hydraulic alternative. The XFORM 230XF10 forms at 35 ipm (889 mm/min) and returns at 430 ipm (10,922 mm/min), while this machine returns at 550 ipm (13,970 mm/min). Approach speed is 550 ipm (13,970 mm/min) for both. In plate, where the forming stroke is long because the die opening is wide, the gap in forming speed turns directly into parts per hour.
Stroke length is 16 in (406 mm), open height 23 in (584 mm), closed height 7 in (178 mm) and throat 18 in (457 mm). The pump runs only during the working portion of the stroke, so the heavy frame does not mean a heavy standing load on the electrical supply while parts are being handled.
Full Specifications
| Parameter | Value |
|---|---|
| Overall Die Surface | 12 ft (3,658 mm) |
| Closed Height | 7 in (178 mm) |
| Stroke Length | 16 in (406 mm) |
| Open Height | 23 in (584 mm) |
| Throat | 18 in (457 mm) |
| Approach Speed | 550 ipm (13,970 mm/min) |
| Forming Speed | 55 ipm (1,397 mm/min) |
| Return Speed | 550 ipm (13,970 mm/min) |
Specifications sourced from e-ci.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 55 ipm (1,397 mm/min) forming speed, against 35 ipm (889 mm/min) on the XFORM 230XF10
- 550 ipm (13,970 mm/min) return, against 430 ipm (10,922 mm/min) on the XFORM 230XF10
- 12 ft (3,658 mm) bed with a 16 in (406 mm) stroke
Limitations
- Forming speed is lower than the 70 ipm (1,778 mm/min) of the XFORMe 175XFe10
- Open height is 23 in (584 mm), an inch less than the XFORMe 350XFe10
Best For
Frequently Asked Questions
01
Approach speed is 550 ipm (13,970 mm/min), forming speed 55 ipm (1,397 mm/min) and return speed 550 ipm (13,970 mm/min). The 14 ft XFORMe 230XFe12 carries the same figures.
02
On the table, speed in and out of the bend: 55 ipm (1,397 mm/min) forming and 550 ipm (13,970 mm/min) return, against 35 ipm (889 mm/min) and 430 ipm (10,922 mm/min) for the XFORM 230XF10. Cincinnati adds a quieter drive, a low-capacity fluid system and standard Dynamic Thickness Compensation.
