Yawei PBC-110/4100
Key Specifications
bending force
bending length
distance between columns
throat depth
ram stroke
die setting height
How much does the Yawei PBC-110/4100 cost?
Price estimate
We do not have a price for the Yawei PBC-110/4100 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
A four-metre bed with light pressure: the Yawei PBC-110/4100 applies 1,100 kN along a bending length of 4,100 mm (161.4 in). It is the PBC for long panels in thin sheet.
On a bend this long, how the bed deflects matters more than how hard the ram pushes. The PBC worktable carries a mechanical crowning system that Yawei says is adjustable point by point. That lets the operator correct the bow of the table section by section, and it is the feature a four-metre, low-tonnage brake depends on for a constant angle from end to end.
The drive is the 12.4 kW (16.6 hp) unit of the PBC-110/3100, with the tank enlarged to 300 L. The third slider speed figure drops slightly: the row reads 220 mm/s; 18 mm/s; 180 mm/s, where the PBC-110/3100 lists 200 mm/s last. Frame figures are the series standard of 410 mm (16.1 in), 265 mm (10.4 in) and 600 mm (23.6 in).
There is 3,600 mm (141.7 in) between the columns, so parts up to that length can pass back into the throat. The machine weighs 9,200 kg (20,282 lb) and its overall dimensions are 4,600 x 1,520 x 2,850 mm (181.1 x 59.8 x 112.2 in). Width is the same as on the three-metre model. A front material holder on a linear guide rail helps support wide panels at working height.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 1,100 kN |
| Bending Length | 4,100 mm (161.4 in) |
| Distance Between Columns | 3,600 mm (141.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Ram Stroke | 265 mm (10.4 in) |
| Die Setting Height | 600 mm (23.6 in) |
| Ram Speed | 220 mm/s; 18 mm/s; 180 mm/s |
| Main Motor Power | 12.4 kW (16.6 hp) |
| Oil Tank Volume | 300 L |
| Machine Dimensions | 4,600 x 1,520 x 2,850 mm (181.1 x 59.8 x 112.2 in) |
| Machine Weight | 9,200 kg (20,282 lb) |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- 4,100 mm (161.4 in) bending length with 3,600 mm (141.7 in) between columns
- Point-by-point mechanical crowning, important on a long bed
- Light for its length at 9,200 kg (20,282 lb)
- Same 12.4 kW (16.6 hp) motor as the three-metre model
- Linear-guided front material holder for wide panels
Limitations
- 1,100 kN over 4,100 mm suits thin sheet only
- Third slider speed of 180 mm/s, lower than on the PBC-110/3100
- Plate work needs the PBC-160/4100 or PBC-220/4100
- Needs a floor length of well over four metres plus handling room
Best For
Frequently Asked Questions
01
Long bends in thin sheet. It offers 1,100 kN of bending pressure across 4,100 mm (161.4 in), with mechanical crowning to hold the angle along the bend.
02
It is longer and heavier: 4,100 mm (161.4 in) and 9,200 kg (20,282 lb) against the 3,100 mm (122.0 in) and 8,500 kg (18,739 lb) of the PBC-110/3100. The oil tank is 300 L, where the PBC-110/3100 has 200 L. Motor power is the same.
03
Overall dimensions are 4,600 x 1,520 x 2,850 mm (181.1 x 59.8 x 112.2 in) (length, width, height). Distance between columns is 3,600 mm (141.7 in).
04
220 mm/s; 18 mm/s; 180 mm/s. The three values are unlabelled on Yawei's page; they normally stand for approach, working and return.
