Doosan DMC 630
This model was not found in Doosan Machine Tools's current lineup when we checked on 2026-10-02 (lineup page). It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
X Travel
Y Travel
Z Travel
Spindle Taper
Tool Capacity
Rapid Traverse
How much does the Doosan DMC 630 cost?
Estimated price range
Our best estimate for a horizontal machining centers (hmc) in this class — not a quote from Doosan Machine Tools. Configuration moves it a long way.
Overview
The Doosan DMC 630 is listed as a horizontal machining center with two 630 x 630 mm (24.8 x 24.8 in) pallets, a 900 mm (35.4 in) cube of X, Y and Z travel and a 35 kW (46.9 hp) spindle with a BT50 / CAT50 taper. No DMC 630 appears in the current lineup of DN Solutions (Doosan Machine Tools before 2022), so the listed figures stand unconfirmed and should be checked against any machine offered under this name.
Two neighbours place it. The DMC 500 is the smaller frame, with 500 x 500 mm (19.7 x 19.7 in) pallets, 730 mm (28.7 in) travels and 30 kW (40.2 hp). The HMC 630 has the same pallet size but 800 mm (31.5 in) of X and Y, 850 mm (33.5 in) of Z and a 30 kW (40 hp) spindle that can be ordered as HSK-A63 at 15,000 RPM. The DMC 630 is the opposite kind of machine at that pallet size: a larger envelope, more power and a 50-taper spindle only. Its table load is listed at 1,000 kg (2,205 lb).
The B-axis indexes in 1° increments, with 0.001° listed as an option. That difference decides whether angled features have to fall on whole degrees. Spindle speed is listed at 8,000 RPM, or 10,000 RPM as an option, the magazine at 60+1 tools, rapid traverse at 60 m/min and positioning accuracy at ± 0.003 mm. The listed control is Fanuc 31iB, with Siemens 840D optional, and the weight is ~25,000 kg (55,115 lb).
Full Specifications
| Parameter | Value |
|---|---|
| Pallet Size | 630 x 630 mm (24.8 x 24.8 in) |
| Table Load Capacity | 1,000 kg (2,205 lb) |
| X-Axis Travel | 900 mm (35.4 in) |
| Y-Axis Travel | 900 mm (35.4 in) |
| Z-Axis Travel | 900 mm (35.4 in) |
| Spindle Speed | 8,000 RPM (10,000 RPM option) |
| Spindle Taper | BT50 / CAT50 |
| Spindle Motor Power | 35 kW (46.9 hp) |
| Tool Capacity | 60+1 tools (ATC) |
| Pallet Count | 2 pallets (standard) |
| B Axis Indexing | 1° increments (0.001° optional) |
| Rapid Traverse Rate | 60 m/min |
| Positioning Accuracy | ± 0.003 mm |
| CNC Control | Fanuc 31iB (Siemens 840D optional) |
| Machine Weight | ~25,000 kg (55,115 lb) |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- 900 mm (35.4 in) of listed travel in each of X, Y and Z over a 630 x 630 mm (24.8 x 24.8 in) pallet
- Listed table load of 1,000 kg (2,205 lb) per pallet, fixture included
- 35 kW (46.9 hp) spindle with a BT50 / CAT50 taper
- 2 pallets as standard and a 60+1 tool magazine
Limitations
- The standard B-axis indexes in 1° steps; 0.001° positioning is an option
- Listed spindle speed is 8,000 RPM, and 10,000 RPM is an option
- A listed weight of ~25,000 kg (55,115 lb) calls for a prepared foundation
- Not in DN Solutions' current lineup, and the listed figures are unconfirmed
Best For
Frequently Asked Questions
01
The DMC 500 has 500 x 500 mm (19.7 x 19.7 in) pallets, 730 mm (28.7 in) travels, 30 kW (40.2 hp) and a weight of ~18,000 kg (39,683 lb). The DMC 630 is listed with 630 x 630 mm (24.8 x 24.8 in) pallets, 900 mm (35.4 in) travels, 35 kW (46.9 hp) and ~25,000 kg (55,115 lb).
02
The listed standard is indexing in 1° increments. Positioning to 0.001° is listed as an option. A machine without the option can only present faces on whole-degree angles, so check which table is fitted.
03
The spindle is listed at 35 kW (46.9 hp) and 8,000 RPM, with 10,000 RPM as an option, and a BT50 / CAT50 taper. The tool magazine is listed at 60+1 tools. No torque figure is listed.
04
The listed table load capacity is 1,000 kg (2,205 lb) on a 630 x 630 mm (24.8 x 24.8 in) pallet, with 2 pallets as standard. The weight of the fixture counts toward that limit.
More from Doosan Machine Tools
Other Horizontal Machining Centers (HMC)
Pinnacle LH500A
DMG Mori i 50
Kitamura Mycenter-H500i
Mazak HCN-6800 NEO
MCM TANK 1300 EVO
