Cincinnati CI Fiber 6020
Key Specifications
Table Size
Accuracy
Repeatability
laser power
rapid travel speed
control
How much does the Cincinnati CI Fiber 6020 cost?
Price estimate
We do not have a price for the Cincinnati CI Fiber 6020 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Long sheet is the purpose of the Cincinnati CI Fiber 6020. It keeps the 2.0 m table width of the smaller machines and extends the length to 6.0 m, which lets parts such as trailer rails, long panels and structural blanks be cut in one piece. Rapid travel speed is 4,921 ipm (124,993 mm/min), and the power source can be 5 kW, 8 kW, 10 kW, 12 kW, 15 kW, 16 kW or 20 kW.
In cross-section it is the CI Fiber 4020 again: 150 in (3,800 mm) wide and 94 in (2,380 mm) high. The extra table shows up only in length. The enclosure grows from 262 in (6,650 mm) on the CI Fiber 4020 to 327 in (8,300 mm), and the overall length with the dual pallet changer reaches 598 in (15,200 mm). A bay wide enough for the CI Fiber 4020 will hold this one, provided there is room end to end.
Speed is the trade. The catalogue groups the 6020 with the two longest tables at 4,921 ipm (124,993 mm/min), down from 6,639 ipm (168,631 mm/min) on the CI Fiber 4020. Positioning accuracy remains ±0.002 in (±0.0508 mm) and repeatability 0.001 in (0.0254 mm).
Two points to raise before ordering. Automation is not off the shelf at this length: the MARCH 400 note in the catalogue says it is available by special request for the 6020. And the published data stops at dimensions, speed and accuracy, so the weight a pallet can carry over 6.0 m has to come from Cincinnati.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size | 6020 (6.0 m x 2.0 m) |
| Laser Power | 5 kW, 8 kW, 10 kW, 12 kW, 15 kW, 16 kW and 20 kW |
| Rapid Travel Speed | 4,921 ipm (124,993 mm/min) |
| Positioning Accuracy | ±0.002 in (±0.0508 mm) |
| Repeatability | 0.001 in (0.0254 mm) |
| CNC Control | Windows Dual Touchscreen, Standard Nesting at the control |
| Motion System | Rack and Pinion Drive |
| Gas Assist | HP Air, N2 Generation, & Mixed Gas Systems Available |
| Width A | 150 in (3,800 mm) |
| Height B | 94 in (2,380 mm) |
| Enclosure Length C | 327 in (8,300 mm) |
| Overall Length D | 598 in (15,200 mm) |
| Pallet Height E | 39 in (980 mm) |
Specifications sourced from wwwassets.e-ci.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 6.0 m x 2.0 m table for long parts cut in one piece
- Same 150 in (3,800 mm) width and 94 in (2,380 mm) height as the CI Fiber 4020
- Power sources from 5 kW to 20 kW
- Positioning accuracy of ±0.002 in (±0.0508 mm) held on the longer table
- Hydraulic dual pallet changer and Windows dual touchscreen control with nesting at the control
Limitations
- Rapid travel is 4,921 ipm (124,993 mm/min), below the 6,639 ipm (168,631 mm/min) of the CI Fiber 4020
- Overall length of 598 in (15,200 mm) needs a long bay
- MARCH 400 automation is by special request for this size
- No pallet load figure is published
Best For
Frequently Asked Questions
01
The enclosure is 327 in (8,300 mm) long and the machine measures 598 in (15,200 mm) overall with the pallet changer. Width is 150 in (3,800 mm), height 94 in (2,380 mm) and pallet height 39 in (980 mm).
02
Yes, by the catalogue's figures. The CI Fiber 6020 is listed at a rapid travel speed of 4,921 ipm (124,993 mm/min). The CI Fiber 4020 is listed at 6,639 ipm (168,631 mm/min). Accuracy is unchanged at ±0.002 in (±0.0508 mm) positioning and 0.001 in (0.0254 mm) repeatability.
03
Cincinnati's catalogue says the MARCH 400 supports the 3015 and 4020 laser systems and that automation is by special request for the 6020 and 6525. Treat it as an engineered project and discuss it with the maker early, not as a standard option.
04
The motion system is a rack and pinion drive. The control is a Windows dual touchscreen with standard nesting at the control, and Cincinnati lists integrated programming software and a dual-monitor HMI among the machine's features. Assist gas can be HP air, N2 generation or a mixed gas system.
More from Cincinnati Incorporated
Other CNC Laser Cutting Machines
Amada VENTIS 3015 AJe
Durma HD-TC 80220
Bodor P Series
Penta Laser BOLT CUBE 3015
Baykal BLE PRO
