Cincinnati XFORM 350XF10
Key Specifications
overall die surface
closed height
stroke length
open height
throat
approach speed
How much does the Cincinnati XFORM 350XF10 cost?
Price estimate
We do not have a price for the Cincinnati XFORM 350XF10 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Cincinnati XFORM 350XF10 belongs to the largest frame in the XFORM table. Its overall die surface is 12 ft (3,658 mm), and it has the tallest opening of the series: 24 in (610 mm) open over an 8 in (203 mm) closed height, with a 16 in (406 mm) stroke and an 18 in (457 mm) throat.
The extra inch of closed height is easy to overlook. It means tooling heights that suit the 7 in (178 mm) closed height of the XFORM 230XF10 will leave different shut-height margins here, so existing punches and dies should be checked before they are moved across.
Ram speeds reflect the size. Approach is 300 ipm (7,620 mm/min) and forming 30 ipm (762 mm/min). Return, at 330 ipm (8,382 mm/min), is quicker than approach, which is unusual in this table. The hybrid XFORMe 350XFe10 is listed slightly faster on all three.
This is a machine for thick plate over moderate lengths, with the 5-axis backgage and 24 in touch screen control that Cincinnati describes for the whole XFORM series.
Full Specifications
| Parameter | Value |
|---|---|
| Overall Die Surface | 12 ft (3,658 mm) |
| Closed Height | 8 in (203 mm) |
| Stroke Length | 16 in (406 mm) |
| Open Height | 24 in (610 mm) |
| Throat | 18 in (457 mm) |
| Approach Speed | 300 ipm (7,620 mm/min) |
| Forming Speed | 30 ipm (762 mm/min) |
| Return Speed | 330 ipm (8,382 mm/min) |
Specifications sourced from e-ci.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 24 in (610 mm) open height, the largest in the XFORM table
- 16 in (406 mm) stroke and 18 in (457 mm) throat on the heaviest frame
- Return speed of 330 ipm (8,382 mm/min)
Limitations
- Approach speed is 300 ipm (7,620 mm/min), against 550 ipm (13,970 mm/min) on the XFORM 230XF10
- Forming speed is 30 ipm (762 mm/min)
- Closed height of 8 in (203 mm) differs from the 7 in (178 mm) of the XFORM 230XF10, so tooling must be checked
Best For
Frequently Asked Questions
01
Open height is 24 in (610 mm) and closed height 8 in (203 mm), with a 16 in (406 mm) stroke. The XFORM 230XF10 opens to 23 in (584 mm) from a 7 in (178 mm) closed height.
02
Approach speed is 300 ipm (7,620 mm/min), forming speed 30 ipm (762 mm/min) and return speed 330 ipm (8,382 mm/min). The same figures apply to the 14 ft XFORM 350XF12.
