Cincinnati XFORMe 350XFe10
Key Specifications
overall die surface
closed height
stroke length
open height
throat
approach speed
How much does the Cincinnati XFORMe 350XFe10 cost?
Price estimate
We do not have a price for the Cincinnati XFORMe 350XFe10 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Cincinnati XFORMe 350XFe10 puts the hybrid drive on the heaviest XFORM frame with a 12 ft (3,658 mm) overall die surface. This frame has its own opening: 8 in (203 mm) closed, 24 in (610 mm) open, a 16 in (406 mm) stroke and an 18 in (457 mm) throat.
Ram speeds are symmetrical, 350 ipm (8,890 mm/min) for both approach and return, with 35 ipm (889 mm/min) forming. Each is a little above the hydraulic XFORM 350XF10, which is listed at 300 ipm (7,620 mm/min), 30 ipm (762 mm/min) and 330 ipm (8,382 mm/min) for return. The margin is small, so at this size the drive is better chosen on its other merits.
Those merits are the ones Cincinnati states for every XFORMe. The servo pump works only during the working portion of the stroke. The hydraulic system is low-capacity and uses a fire-resistant, biodegradable fluid. On a brake of this class, which may sit loaded with a heavy plate while a crane is repositioned, a drive that idles quietly without consuming much is a practical advantage.
Full Specifications
| Parameter | Value |
|---|---|
| Overall Die Surface | 12 ft (3,658 mm) |
| Closed Height | 8 in (203 mm) |
| Stroke Length | 16 in (406 mm) |
| Open Height | 24 in (610 mm) |
| Throat | 18 in (457 mm) |
| Approach Speed | 350 ipm (8,890 mm/min) |
| Forming Speed | 35 ipm (889 mm/min) |
| Return Speed | 350 ipm (8,890 mm/min) |
Specifications sourced from e-ci.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 24 in (610 mm) open height on the heaviest hybrid frame
- 350 ipm (8,890 mm/min) approach, above the 300 ipm (7,620 mm/min) of the XFORM 350XF10
- Pump runs only during the working portion of the stroke
- Dynamic Thickness Compensation standard
Limitations
- Forming speed is 35 ipm (889 mm/min), the lowest tier in the XFORMe table
- Approach is well below the 550 ipm (13,970 mm/min) of the XFORMe 230XFe10
- Closed height of 8 in (203 mm) means tooling set for the 7 in (178 mm) of the XFORMe 230XFe10 must be rechecked
Best For
Frequently Asked Questions
01
Closed height is 8 in (203 mm) and open height 24 in (610 mm), with a 16 in (406 mm) stroke length. The throat is 18 in (457 mm) and the overall die surface 12 ft (3,658 mm).
02
Slightly. The XFORMe 350XFe10 is listed at 350 ipm (8,890 mm/min) approach, 35 ipm (889 mm/min) forming and 350 ipm (8,890 mm/min) return. The XFORM 350XF10 is listed at 300 ipm (7,620 mm/min), 30 ipm (762 mm/min) and 330 ipm (8,382 mm/min).
More from Cincinnati Incorporated
Other CNC Press Brakes
Accurl EURO GENIUS B25110H
Amada HRB 2204
