Yawei PBH(A)-630/5100
Key Specifications
bending force
table length
distance between columns
throat depth
ram stroke
max opening height
How much does the Yawei PBH(A)-630/5100 cost?
Price estimate
We do not have a price for the Yawei PBH(A)-630/5100 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Yawei PBH(A)-630/5100 is rated at 6,300 kN over a 5,100 mm (200.8 in) table. Among the four 6,300 kN press brakes in the PBH(A) series it is the five-metre size.
Its table reads like a longer PBH(A)-630/4100 in every row but three. Column spacing becomes 4,200 mm (165.4 in), the frame grows to 5,400 x 2,430 x 4,200 mm (212.6 x 95.7 x 165.4 in), and the weight goes to 52,000 / 47,000 kg (114,638 / 103,616 lb) from 38,000 / 35,000 kg (83,774 / 77,160 lb) on the PBH(A)-630/4100. The oil tank is 1,200 L on both, and the motor is 45 kW (60.3 hp) on both.
Working space follows the group: a 510 mm (20.1 in) throat, 315 mm (12.4 in) of stroke, 620 mm (24.4 in) of opening. Speeds are 110 mm/s; 8.5 mm/s; 90 mm/s.
Five metres is a sensible length for thick plate that arrives in wide formats. The part can be turned to put its long side on the bed, and the columns clear a four-metre width with full-depth flanges.
The page describes the series as built from high-quality steel plate, with an electro-hydraulic servo system holding the two sides of the ram in step under fully closed-loop control. Throat deformation compensation is listed alongside the crowning system. At this force the side frames stretch measurably under load, and that compensation is what keeps depth, and with it the angle, repeatable.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 6,300 kN |
| Table Length | 5,100 mm (200.8 in) |
| Distance Between Columns | 4,200 mm (165.4 in) |
| Throat Depth | 510 mm (20.1 in) |
| Ram Stroke | 315 mm (12.4 in) |
| Max Opening Height | 620 mm (24.4 in) |
| Ram Speed | 110 mm/s; 8.5 mm/s; 90 mm/s |
| Main Motor Power | 45 kW (60.3 hp) |
| Oil Tank Volume | 1,200 L |
| Machine Dimensions | 5,400 x 2,430 x 4,200 mm (212.6 x 95.7 x 165.4 in) |
| Machine Weight | 52,000 / 47,000 kg (114,638 / 103,616 lb) |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- 6,300 kN over a 5,100 mm (200.8 in) table
- 4,200 mm (165.4 in) between columns clears four-metre parts
- Oil tank and motor no larger than on the four-metre model
- 620 mm (24.4 in) maximum opening height
- Throat deformation compensation listed for the series
Limitations
- Considerably heavier than the PBH(A)-630/4100
- Frame more than four metres high
- Pressing speed of 8.5 mm/s
- Slider stroke of 315 mm (12.4 in)
Best For
Frequently Asked Questions
01
6,300 kN nominal force on a 5,100 mm (200.8 in) table. Throat opening is 510 mm (20.1 in), slider stroke 315 mm (12.4 in) and maximum opening height 620 mm (24.4 in); the motor is 45 kW (60.3 hp).
02
Column spacing is 4,200 mm (165.4 in). A part up to that width can be bent with flanges of any depth; wider parts are limited behind the bend line by the 510 mm (20.1 in) throat opening.
03
The PBH(A)-500/5100 lists 5,000 kN, a 37 kW (49.6 hp) motor and an opening height of 520 mm (20.5 in). Here these are 6,300 kN, 45 kW (60.3 hp) and 620 mm (24.4 in).
04
Yawei gives 5,400 x 2,430 x 4,200 mm (212.6 x 95.7 x 165.4 in) for the overall dimensions and 52,000 / 47,000 kg (114,638 / 103,616 lb) for the total weight, the latter as two figures with no note.
More from Yawei
Other CNC Press Brakes
Durma AD-S 30100
