Yawei HPM-3058
Key Specifications
punching force
max sheet size
max sheet thickness carbon steel
max sheet thickness stainless steel
max punch diameter
die positions standard
How much does the Yawei HPM-3058 cost?
Price estimate
We do not have a price for the Yawei HPM-3058 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Yawei lists two frames in its HPM high-end turret punch series, and the Yawei HPM-3058 is the longer and heavier one: 6,280 mm (247.2 in) long and 19,000 kg (41,887 lb), against 5,610 mm (220.9 in) and 17,500 kg (38,580 lb) for the HPM-3048. Width and height are the same on both at 5,000 mm (196.9 in) and 2,300 mm (90.6 in).
Every punching figure is shared between the two. Nominal force is 294 kN, the turret has 56 standard die positions, the largest punch is Φ88.9 mm (3.5 in) and the punching frequency is 2,500 cpm. A buyer choosing between them is therefore choosing a table, not a punching head.
Here the published table needs a second look. It prints 1,250 x 5,000 mm (49.2 x 196.9 in) as the maximum processing plate size for this model, the same value as for the HPM-3048, even though the machine is longer. Ask Yawei which sheet width the HPM-3058 is built for before relying on that row.
Thickness limits are 6.35 mm (0.25 in) for carbon steel and 4 mm (0.16 in) for stainless. Accuracy is ±0.1 mm (±0.0039 in). The control runs 7 (X, Y1, Y2, T1, T2, C, Z) axes, and the maker describes a full touch interface, a servo stamping system on the main shaft, and low noise and energy use, without figures for either. Applications listed for the series include the electrical, home appliance, lift and metal curtain wall industries.
Full Specifications
| Parameter | Value |
|---|---|
| Punching Force | 294 kN |
| Max Sheet Size | 1,250 x 5,000 mm (49.2 x 196.9 in) |
| Max Sheet Thickness Carbon Steel | 6.35 mm (0.25 in) |
| Max Sheet Thickness Stainless Steel | 4 mm (0.16 in) |
| Max Punch Diameter | Φ88.9 mm (3.5 in) |
| Die Positions Standard | 56 |
| Punching Accuracy | ±0.1 mm (±0.0039 in) |
| Punching Frequency | 2,500 cpm |
| Punching Frequency 1mm Step | 900 cpm (1 mm step, 6 mm stroke) |
| Punching Frequency 25mm Step | 450 cpm (25.4 mm step, 6 mm stroke) |
| Max Sheet Travel Speed | 102 m/min |
| Turret Speed | 30 rpm |
| Controlled Axes | 7 (X, Y1, Y2, T1, T2, C, Z) |
| Air Supply | 0.6 MPa |
| Machine Length | 6,280 mm (247.2 in) |
| Machine Width | 5,000 mm (196.9 in) |
| Machine Height | 2,300 mm (90.6 in) |
| Machine Weight | 19,000 kg (41,887 lb) |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- Larger frame of the HPM series at 6,280 mm (247.2 in) overall length
- Same 2,500 cpm punching frequency and 56 die positions as the HPM-3048
- Punching accuracy of ±0.1 mm (±0.0039 in)
- Seven axes, 7 (X, Y1, Y2, T1, T2, C, Z), with a full touch man-machine interface
- Supports roll forming, described by Yawei as efficient precision rolling molding
Limitations
- The table prints the same 1,250 x 5,000 mm plate size as for the shorter HPM-3048, so the real sheet capacity needs confirming
- Heaviest HPM at 19,000 kg (41,887 lb)
- Maximum thickness of 6.35 mm in carbon steel is no higher than on Yawei's lighter turret punches
- Low noise and low energy consumption are claimed without numbers
Best For
Frequently Asked Questions
01
Size and weight. The HPM-3058 is 6,280 mm (247.2 in) long and weighs 19,000 kg (41,887 lb); the HPM-3048 is 5,610 mm (220.9 in) long and weighs 17,500 kg (38,580 lb). Force, turret, speeds and axes are identical in Yawei's table.
02
Yawei's table states 1,250 x 5,000 mm (49.2 x 196.9 in) including one repositioning. That is the same figure it prints for the HPM-3048, so it is worth confirming with the maker whether the longer frame takes a wider sheet.
03
Nominal force is 294 kN. There are 56 standard die positions, the maximum diameter of one punch is Φ88.9 mm (3.5 in), and the turntable rotates at 30 rpm.
04
Seven: 7 (X, Y1, Y2, T1, T2, C, Z). The paired Y and T entries distinguish the HPM from the HPE series, whose table lists five axes. Sheet travel reaches 102 m/min.
More from Yawei
Other CNC Punch Presses
Voortman V808
Amada VIPROS 368
Amada EML 2515 AJe
Prima Power Shear Brilliance 1540
Ermak ETP-S 1500x2500 (30 ton)
