Yawei HPC-3058
Key Specifications
punching force
max sheet size
max sheet thickness carbon steel
max sheet thickness stainless steel
max punch diameter
die positions standard
How much does the Yawei HPC-3058 cost?
Price estimate
We do not have a price for the Yawei HPC-3058 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Yawei HPC-3058 is a servo turret punch press of 294 kN for sheet up to 1,500 x 5,000 mm (59.1 x 196.9 in), counting one repositioning. It is the largest model of the HPC series for which Yawei's page carries a consistent table.
HPC is the plain servo line beneath the HPE. The turret has 38 standard die positions and the punching frequency is 2,000 cpm, with 380 cpm (25.4 mm step, 6 mm stroke). The HPE-3058 punches the same sheet at 2,300 cpm. Both weigh 19,000 kg (41,887 lb), and both list 6.1 kW (8.2 hp) of working power, so the difference between the lines is hit rate and control, not frame.
Thickness capacity is 6.35 mm (0.25 in) in carbon steel and 4 mm (0.16 in) in stainless, and one punch may be up to Φ88.9 mm (3.5 in). Sheet travel reaches 102 m/min. The control runs 5 axes, which the page does not name.
Yawei states that the main axis is controlled by a servo punching system, that the rotating stations use its patented constant-mesh design, and that roller forming is possible. Dimensions are 6,030 mm (237.4 in) by 5,000 mm (196.9 in) by 2,260 mm (89.0 in). For a shop punching 1,500 mm sheet without a need for the last few hundred hits a minute, this is the simpler machine to justify.
Full Specifications
| Parameter | Value |
|---|---|
| Punching Force | 294 kN |
| Max Sheet Size | 1,500 x 5,000 mm (59.1 x 196.9 in) |
| Max Sheet Thickness Carbon Steel | 6.35 mm (0.25 in) |
| Max Sheet Thickness Stainless Steel | 4 mm (0.16 in) |
| Max Punch Diameter | Φ88.9 mm (3.5 in) |
| Die Positions Standard | 38 |
| Punching Accuracy | ±0.1 mm (±0.0039 in) |
| Punching Frequency | 2,000 cpm |
| Punching Frequency 1mm Step | 700 cpm (1 mm step, 6 mm stroke) |
| Punching Frequency 25mm Step | 380 cpm (25.4 mm step, 6 mm stroke) |
| Max Sheet Travel Speed | 102 m/min |
| Turret Speed | 30 rpm |
| Controlled Axes | 5 |
| Air Supply | 0.6 MPa |
| Working Power | 6.1 kW (8.2 hp) |
| Machine Length | 6,030 mm (237.4 in) |
| Machine Width | 5,000 mm (196.9 in) |
| Machine Height | 2,260 mm (89.0 in) |
| Machine Weight | 19,000 kg (41,887 lb) |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- Sheet capacity of 1,500 x 5,000 mm (59.1 x 196.9 in) including one repositioning
- 38 standard die positions
- Servo punching system with a frequency of 2,000 cpm
- Working power of 6.1 kW (8.2 hp)
- Same 294 kN force as the HPE and HPM lines
Limitations
- 2,000 cpm against 2,300 cpm on the HPE-3058
- Five control axes, not identified on the page
- Weighs 19,000 kg (41,887 lb) and needs 6,030 mm by 5,000 mm of floor
- Two other tabs on the HPC page carry figures that do not match their model names, so check any HPC data sheet before ordering
Best For
Frequently Asked Questions
01
Nominal force 294 kN, maximum processing plate size 1,500 x 5,000 mm (59.1 x 196.9 in) including one repositioning, 38 standard die positions and a punching frequency of 2,000 cpm.
02
The HPE-3058 lists a punching frequency of 2,300 cpm and names its five axes. The HPC-3058 lists 2,000 cpm and gives a die position count of 38. Sheet size, force, weight and working power are the same in the two tables.
03
Maximum plate thickness is 6.35 mm (0.25 in) for carbon steel plate and 4 mm (0.16 in) for stainless steel plate. The maximum diameter of one punch is Φ88.9 mm (3.5 in).
04
Overall dimensions are 6,030 mm (237.4 in) long, 5,000 mm (196.9 in) wide and 2,260 mm (89.0 in) high. Weight is 19,000 kg (41,887 lb), and the air source is 0.6 MPa.
More from Yawei
Other CNC Punch Presses
LVD Strippit VX 1530 CNC Turret Punch Press
Euromac MX Punch 8/1500
Amada AE-NT 2510
TRUMPF TruPunch 3000 CNC Punch Press
Peddinghaus FAB-MASTER 8
