Yawei HPE-3047
Key Specifications
punching force
max sheet size
max sheet thickness carbon steel
max sheet thickness stainless steel
max punch diameter
punching accuracy
How much does the Yawei HPE-3047 cost?
Price estimate
We do not have a price for the Yawei HPE-3047 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Yawei HPE-3047 is a 294 kN servo turret punch press for 1,250 mm sheet up to 4,000 mm long. Yawei lists the capacity as 1,250 x 4,000 mm (49.2 x 157.5 in) including one repositioning.
It occupies the middle of the three 1,250 mm HPE models, and its dimensions say how. The machine is 4,000 mm (157.5 in) wide and weighs 15,000 kg (33,069 lb). The HPE-3048 is 5,000 mm (196.9 in) wide for a five-metre sheet, and the HPE-3044 only 2,300 mm (90.6 in) for a 2,500 mm sheet. All three are 5,610 mm (220.9 in) long.
For a job shop the question is which sheet it buys. The short stock that the HPE-3044 is limited to, 1,250 x 2,500 mm (49.2 x 98.4 in), runs on any of the three. Sheet up to 4,000 mm long, the kind used for cabinet sides and long covers, needs this model or the larger one, and this one leaves a metre of floor free.
The servo punching head is rated at a punching frequency of 2,300 cpm. Sheet travel speed is 102 m/min and turntable speed 30 rpm. The control handles 5 (X, Y, T, C, Z), where C is the rotating station that Yawei describes as a patented constant-mesh design. Working power is 6.1 kW (8.2 hp), and the maker stresses low noise.
Full Specifications
| Parameter | Value |
|---|---|
| Punching Force | 294 kN |
| Max Sheet Size | 1,250 x 4,000 mm (49.2 x 157.5 in) |
| Max Sheet Thickness Carbon Steel | 6.35 mm (0.25 in) |
| Max Sheet Thickness Stainless Steel | 4 mm (0.16 in) |
| Max Punch Diameter | Φ88.9 mm (3.5 in) |
| Punching Accuracy | ±0.1 mm (±0.0039 in) |
| Punching Frequency | 2,300 cpm |
| Punching Frequency 1mm Step | 750 cpm (1 mm step, 6 mm stroke) |
| Punching Frequency 25mm Step | 410 cpm (25.4 mm step, 6 mm stroke) |
| Max Sheet Travel Speed | 102 m/min |
| Turret Speed | 30 rpm |
| Controlled Axes | 5 (X, Y, T, C, Z) |
| Working Power | 6.1 kW (8.2 hp) |
| Air Supply | 0.6 MPa |
| Machine Length | 5,610 mm (220.9 in) |
| Machine Width | 4,000 mm (157.5 in) |
| Machine Height | 2,260 mm (89.0 in) |
| Machine Weight | 15,000 kg (33,069 lb) |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- Takes 1,250 x 4,000 mm (49.2 x 157.5 in) sheet in a machine 4,000 mm wide
- 15,000 kg (33,069 lb), between the HPE-3044 and the HPE-3048
- Punching accuracy of ±0.1 mm (±0.0039 in)
- Constant-mesh rotating station on the C axis
- Working power of 6.1 kW (8.2 hp)
Limitations
- Cannot take a 5,000 mm sheet; that needs the HPE-3048
- Sheet width is limited to 1,250 mm
- Maximum punch diameter of Φ88.9 mm and 6.35 mm thickness are fixed across the series, so there is no heavier option
- No noise or energy figures support the maker's claims
Best For
Frequently Asked Questions
01
Up to 1,250 x 4,000 mm (49.2 x 157.5 in), including one repositioning, at a thickness of up to 6.35 mm (0.25 in) in carbon steel or 4 mm (0.16 in) in stainless steel.
02
4,000 mm (157.5 in). Its length is 5,610 mm (220.9 in) and its height 2,260 mm (89.0 in), and it weighs 15,000 kg (33,069 lb). The HPE-3048 is 5,000 mm (196.9 in) wide and the HPE-3044 2,300 mm (90.6 in).
03
The number of control axes is listed as 5 (X, Y, T, C, Z). Sheet travelling speed is up to 102 m/min and the turntable speed is 30 rpm.
04
Yawei says the HPE can achieve efficient and precise roller forming, and gives the servo head a dead-point positioning accuracy of 0.01mm. Forming height limits are not published, so check them against your tooling.
More from Yawei
Other CNC Punch Presses
TRUMPF TruPunch 5000 CNC Punch Press
Boschert MultiPunch
Amada EM-ZRT 3612
Pullmax P9 CNC Turret Punch Press
