Amada EM-2510NT CNC Punch Press
This model was not found in Amada's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
punch force
drive type
work area
turret stations
max tool diameter
punch speed
How much does the Amada EM-2510NT CNC Punch Press cost?
Estimated price range
Our best estimate for a cnc punch presse in this class — not a quote from Amada. Configuration moves it a long way.
Overview
Turret capacity is the headline of the Amada EM-2510NT in this listing: 48 stations, rising to as many as 72 tools once multi-tool holders are fitted, on a 25 ton (220 kN) servo-electric punch press. Amada does not show the model in its present lineup, and everything below is drawn from the listed figures.
The count matters for a practical reason. A multi-tool holder puts several small punches in one station, and the stations it frees can stay loaded with the large or shaped tools a shop reaches for every week. Fewer turret changes between jobs is the result, and on short runs the setup time saved can outweigh raw hit rate. The largest tool the turret accepts is 88.9 mm in diameter.
The sheet side of the table reads 1270 x 2500 mm (50 x 98 in) for the work area and 0.5 - 6.4 mm for mild steel. Stainless and aluminum have no entry, so ask about them separately if the work is not mild steel. Between hits the sheet repositions at 100 m/min, and nibbling runs at up to 600 hits/min.
An AC servo motor drives the ram. Power consumption is given as ~15 kW, with 25+ kW shown for a hydraulic machine in the same row. The control is the Amada AMNC 3i. Weight, accuracy and installation dimensions are missing from the listed figures and should be requested with any offer.
Full Specifications
| Parameter | Value |
|---|---|
| Punch Force | 25 ton (220 kN) |
| Drive Type | Servo-electric (AC servo motor) |
| Work Area | 1270 x 2500 mm (50 x 98 in) |
| Turret Stations | 48 (up to 72 with multi-tool) |
| Max Tool Diameter (full magazine) | 88.9 mm |
| Punch Speed | Up to 600 hits/min (nibbling) |
| Sheet Thickness | 0.5 - 6.4 mm mild steel |
| Repositioning Speed | 100 m/min |
| CNC Control | Amada AMNC 3i |
| Power Consumption | ~15 kW (vs 25+ kW hydraulic) |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- 48 turret stations, up to 72 tools with multi-tool
- Accepts tools up to 88.9 mm in diameter
- AC servo motor drive listed at ~15 kW, against 25+ kW for a hydraulic machine
- 100 m/min repositioning and up to 600 hits/min when nibbling
Limitations
- Only a mild steel range (0.5 - 6.4 mm) is listed; stainless and aluminum limits are not given
- Reaching 72 tools depends on fitting multi-tool holders; the turret itself has 48 stations
- 25 ton (220 kN) of punch force limits large tools in sheet near 6.4 mm
- No weight, accuracy or footprint figures in the listing
Best For
Frequently Asked Questions
01
The turret has 48 stations. With multi-tool holders, which group several small punches in a single station, the listed capacity rises to as many as 72 tools. How close a machine gets to that depends on how many multi-tool holders come with it.
02
Maximum tool diameter is 88.9 mm. Whether a tool of that size can be used on a given job also depends on the 25 ton (220 kN) punch force, since a long cutting perimeter in thick sheet needs more force than a small round hole.
03
A 1270 x 2500 mm (50 x 98 in) work area and a sheet thickness of 0.5 - 6.4 mm in mild steel. Repositioning speed is 100 m/min. Other materials are not covered by the listed figures.
04
Electric. The drive type is servo-electric with an AC servo motor. Power consumption is listed as ~15 kW, and the same row gives 25+ kW for a hydraulic machine by way of comparison.
Videos
Elite Machinery Inc.
John Taylor Engineering Services Ltd
Piotr Małek
More from Amada
Other CNC Punch Presses
EUROMAC MTX Flex 6/1250
TRUMPF TruPunch 1000 CNC Turret Punch Press
LVD Strippit QX-L
