Yawei HLG-25120
Key Specifications
Accuracy
Repeatability
cutting area
x axis travel
y axis travel
z axis travel
How much does the Yawei HLG-25120 cost?
Price estimate
We do not have a price for the Yawei HLG-25120 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Yawei HLG-25120 is a floor-mounted gantry laser cutting machine with a machining range of 12,000 x 2,500 mm (472.4 x 98.4 in). In the HLG design the rails are fixed to the floor and the gantry travels along them, which is how Yawei reaches formats that a machine bed cannot.
This is the standard-size HLG, and half of its table is blank for that reason. Table load, machine dimensions and weight are all given as depending on the specific processing width. The series is built to order, and Yawei's page shows a customisable range that runs far beyond this model in both length and width.
What is fixed are the motion figures. X-axis travel is 12,040 mm (474.0 in), Y-axis travel 2,520 mm (99.2 in) and Z-axis travel 180 mm (7.1 in). Maximum linkage speed is 90 m/min. Positioning accuracy is ±0.1 mm (±0.0039 in) and repeat positioning accuracy ±0.06 mm (±0.0024 in); both are looser than the ±0.03 mm (±0.0012 in) of the HLF-25120, a bed-type machine of the same range, as is normal for a floor-rail machine.
Power options are 12, 20, 30, 40, 60 or 80 kW. Yawei describes a high-rigidity lightweight beam and a dynamic dust removal air duct that follows the cut. A buyer should treat the published sheet as a starting point for a specification, and expect the foundation and rail installation to be part of the project.
Full Specifications
| Parameter | Value |
|---|---|
| Cutting Area | 12,000 x 2,500 mm (472.4 x 98.4 in) |
| X Axis Travel | 12,040 mm (474.0 in) |
| Y Axis Travel | 2,520 mm (99.2 in) |
| Z Axis Travel | 180 mm (7.1 in) |
| Max Trajectory Speed Xy | 90 m/min |
| Positioning Accuracy | ±0.1 mm (±0.0039 in) |
| Repeatability | ±0.06 mm (±0.0024 in) |
| Laser Power | 12, 20, 30, 40, 60 or 80 kW |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- Floor-mounted gantry with a 12,000 x 2,500 mm (472.4 x 98.4 in) machining range
- Power options from 12 kW to 80 kW
- Built to order, with table and dimensions set by the processing width
- Dynamic dust removal air duct
- High-rigidity lightweight beam
Limitations
- Positioning accuracy of ±0.1 mm (±0.0039 in), looser than Yawei's bed-type lasers
- Linkage speed of 90 m/min
- Table load, dimensions and weight are not fixed in the published table
- Floor rails make the foundation part of the machine
Best For
Frequently Asked Questions
01
12,000 x 2,500 mm (472.4 x 98.4 in). X-axis travel is 12,040 mm (474.0 in), Y-axis travel 2,520 mm (99.2 in) and Z-axis travel 180 mm (7.1 in).
02
Yawei's table states that the maximum table load, the machine dimensions and the weight depend on the specific processing width. The HLG is a customised series, so those values are fixed per order.
03
Positioning accuracy is ±0.1 mm (±0.0039 in) and repeat positioning accuracy is ±0.06 mm (±0.0024 in). The maximum X-Y linkage speed is 90 m/min.
04
Laser generator power is listed as 12, 20, 30, 40, 60 or 80 kW. There is no option below 12 kW, which fits a machine built for large plate.
More from Yawei
Other CNC Laser Cutting Machines
TRUMPF TruLaser 5060 fiber
Ermak Fibermak SL 3x1.5
GF Machining CHARMILLES LASER P 400
HSG T2
BLM Group LC5
